Cannot connect to my Satellite M30-106 of the mobile phone using the IrDA port

Similar Questions

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Satellite M30-106: USB Ports not working not

  Hello.

  I have a problem with my Satellite M30-106. One day, the system froze (Windows XP with SP2) during the passage of the machine off. I was forced to keep the button "power" for a while in order to close the system. However, since all 3 USB ports do not work.

  The system does not recognize the "" them. I can't see in Device Manager. I tried to reinstall the system, but it did not help.

  Can someone help me, pelase =)

  Hello

  It looks like a hardware problem. At whatever it is connected to the USB ports at the time? Could you check the USB ports visually and see if they are damaged or wobbly. It is a bit of a long shot, but you may have a short circuit decision and which could disable the USB.
  If the motherboard is damaged then outside fixing/replace your only option would be a PCMCIA USB card, they are not expensive.

  Best regards
  Swarvek

• Upgrade CPU on Satellite M30 106

  Hi people

  Could with help please?

  Just got an old Toshiba Satellite M30-106, a few weeks ago and [to be fair] it works OK with xp on it. I bought another 2 gig DDR which brings speed wise difference, but I can move the processor to the Intel® Pentium® M processor 725 1.60 GHz FSB: 400 MHz, 2: 2 MB level cache that s in there earlier?

  Can she take a CPU more high if so what s the highest? Would be very graciously tips please.

  Thanks in advance...

  At first, I must say that I agree with you that this laptop will work with Windows XP Home edition. At least this laptop model is designed for Windows XP Home edition. ;)

  I found some info on the processors on Satellite M30:
  + The Satellite M30 computer is equipped with a processor Intel Banias who +.
  + integrates mathematical co-processor, memory 64 KB of L1 cache and a 1 MB L2 cache.
  + memory. The processor works with one of the following speeds: +.
  + Processor Intel Banias 1.40 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.50 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.60 GHz (1.35v) / 1.20 GHz (0.85V) +.
  + Processor Intel Banias 1.70 GHz (1.35v) / 1.20 GHz (0.85V) +.

  Then maybe you can use the fastest processor 1.70 GHz. I don't think you'll see the difference.
  Best thing you can do is upgrade RAM to max and optimize Windows XP Home pre-installed, and you will be happy with this good old classic.

• Need replacement for Satellite M30 106 recovery disk

  Hello

  I need a replacement recovery disc for my satellite m30-106. I bought the laptop in the United Kingdom, but now I'm in portugal. Is there anywhere I can download or get a rendering?

  Thank you very much

  Matt Leach

  I subscribe to the opinion of Johnny s.
  The recovery CD can be purchased from suppliers of services authorized in your country. These CD s are not expensive.

• Success story on the installation of hard drive of 160 GB to a Satellite M30 106

  Hello

  I upgraded my Satellite M30-106 with a 160 GB HDD and it works brilliantly. The hard drive I bought is disc Hitachi 5 K 160 PMR - my only worry was bios (someone suggested he can not see) but it went smooth. I have no worry about power because the new takes less energy (it runs faster however). I have not noticed any hitch or any strange behaviour and I admit to more than a month now and it has been widely used.

  Best regards
  Swarvek

  PS. Sorry to start a new thread, but man, it has been locked.
  PS2. I also brought up my memory some time ago to 1 GB - kingston value ram has been around - this laptop doesn't seem to be too fussy about memory.

  Man, it's good, because one of my friends was about to publish a thread about upgrading its M30 because he didn t know if a disk over big then 100 Gig will go into his machine.

  Well, I must say thank you for your experience posted here. :)

  Have a nice weekend

• Necessary recovery for my Satellite M30-106 disc

  Anyone know where I can download or buy a recovery for my Satellite M30-106 disc?
  My striped child mine up to hell and back and he won t work either :-(

  Regards Wayne

  Satellite M30 is old enough laptop model and I don't think that to do this, you can order a Toshiba recovery media.
  What you can try is to contact the nearest authorized maintainer and ask for help.
  Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > download & support > find an ASP.

  Otherwise you can use the CD of Microsoft facilities for the installation of Windows XP Home edition. Download page for all drivers & tools Toshiba utilities that you can download from Toshiba. Your laptop is listed in the archives.

• Satellite 4100XCDT: how the IRDA port works under DOS

  I have a Toshiba Satellite 4100xcdt. How do I assign a COM port to the IRDA (infrared) port in the BACK so I can use programs such as Winsamp
  http://www.veg.Nildram.co.UK/remote.htm

  The BIOS assigns COM1 and COM2 serial port to the built-in modem. However there is not a single option for the IRDA port not found.

  How can I make the IRDA port works under DOS?

  In my opinion it of not possible to use the IrDA DOS, because drivers must be installed and initialized.
  The IrDA port driver is a common Windows driver and the irda connection works only when windows was loaded

• Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

  Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

  The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

  I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

  In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
  Remember that the mobile phone IrDA window is in the right position.

• Connection WIFI on Satellite M30

  Hello
  I have the Satellite M30 with an Intel PRO Wireless 2200BG Driver version 8.1.0.26 adapter set the driver installation was successful, but when I click on connect it displays unavailable connection. but one of my friends uses his computer laptop connecting to the same net work and it also displays 'network connection out of range box' I am UNABLE to GET WHATS PAST MY LAN CONNECTION IS CONNECTED to the SAME NETWORK IT IS WORKING GUD.

  CLEARLY ON MY SIDE
  MY WLAN BUTTON IS IN THE MODE
  LAN IS DISCONNECTED FROM THE PC
  LAN CONNECTION WORKS
  ONE OF MY ROOMMATE IS USING THE SAME NETWORK WITH WLAN

  Any help will be appreciated.

  Hello

  On this path, it is not easy to give a precise answer, but in my opinion the reason for this is a false setting on your router. Please remove password for your WLAN (if persist) and start by simply configuring. The settings on your router are not known to me, but you can try to configure the router on the factory restore and try to establish the connection.

  If you use PPPoE connection type don t forget the IP address must be set on automatically.

  Good bye

• Satellite M30-106: System error at startup: resource conflict run the program installation or start-up?

  Hello, can someone help me please?
  When I start or restart my Toshiba Satellite SM30-106 laptop I get a system error RESOURCE CONFLICT Do You want to run the installation?

  I have 2 options [Run Setup] or [Boot]
  If I run [installation] I go to the blue Bios setup but can not see anything that can cause this error.
  If I select [boot boots} the system as usual.]
  How can I get my laptop start normally?
  I have no shared or added to any material. I ran the CD recovery Toshiba, no luck.
  concerning

  Richard, London SE6

  Y at - it an option to load the default settings of the BIOS on your laptop? If so, try it.

  Can't think right now that can generate this error unless you have recently
  had a new device that is STILL attached to a USB port (USB drive, printer, etc.)

  Concerning

  chain

  Update:
  I had a mistake of swearing to this post. I have found what Word does: "P E N" USB key so I replaced it with USB

• Upgrade processor for Satellite M30 106

  Hello

  I am looking to change the processor in my laptop, but anyone know what is the fastest processor I can use?

  Best regards
  Swarvek

  Satellite M30 laptop is very nice. I worked for about 6 months on this laptop. For me the laptop is powerful enough and upgrade the CPU is really not necessary. What you need to do is upgrade of RAM at the level maximum and of course good configuration of the OS.

  Can you please tell me what operations run so slow and you want to upgrade CPU on this laptop?

• Need replacement for Satellite M30 106 keyboard

  Anyone of you, wonderful people you will suggest somewhere where I can get a keyboard replacement at reasonable price for my M30-106. So far, cheapest I can find is about A £58. Perhaps there is a yard of circuit breakers for these things?

  All ideas welcome.

  Thank you

  Phil

  Hello

  Don t you have lots of options, since you can choose between:

  -Internet retailer
  -Ebay
  -Service provider authorized (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT)

  I would suggest to check first what price the AEP has, then Ebay and then you bite into the sour Apple. :)

  Welcome them

• Satellite M30: Questions about the battery, SD, energy-saving card reader

  1. After looking through the forums, it seems that my problem is not uncommon: my Toshiba Satellite M30 seems to have a life of the battery for about 10 minutes. Power not connected to the adapter, Windows detects 100%... 99%... Then 3%. Throughout the life of the battery is about 10 minutes, and I don't know why. Does anyone know? (Info from BG: laptop about 2 years, not too used)

  2. How will I know exactly WHAT model of Toshiba Satellite M30 I? (There is a code after the M30-part - I need this to find out what batteries I need to buy to replace)

  3. What is the nearest Service Center, I can talk to the United Kingdom with regard to my battery problem? From Toshiba Web site lists 20 companies different with Toshiba in them to the United Kingdom, and I have no idea which we touch!

  4. my SD card reader is a bit faulty. To put a SD card, no message appears to recognize the card - the laptop just doesn't recognize at all, and I do not see "SD card" or equivalent in "My Computer". However, if I put an SD card, and then restart the computer, I can see the SD card, it simply does not update while the computer is on, when I restart - cures for this?

  5. Finally, can I download the software of management of TOSHIBA POWER SAVER? I downloaded from this site but right now the only option when I open the TOSHIBA CONSOLE is 'Mouse' - there is no standby power options or network options or anything.

  Thanks in advance, sorry there are so many questions and they are so different!

  Cheerio,
  John

  Hello

  1) looks like a dead battery. It s not unusual that the battery will discharge performance after about 2 years. As far as I remember, you can load and unload the battery for about 500 times. After this period, the lifetime battery decreases faster. The same symptom occurs for example with a cell phone battery. I think you should ask the new battery Toshiba service partner. PS: The guarantee covers the battery for about a year.

  (2) it's very easy at the bottom of the unit, you will find a label with the serial number and the name of detailed specifications.

  (3) visit this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true
  You will find the database with ASP together all over the world. These guys are responsible for replacements, repairs, etc.

  (4) number of SD card is very strange. On my Satellite SD card window opens if I insert the SD card. You can try to remove the SD card from the Device Manager reader and after that new reboot, the OS should has new charge card CD driver. Eventually, it helps.

  (5) I don't know what you mean exactly but on the Toshiba driver page, you will find the tool power Toshiba compatible and taken in charge. If you have downloaded from the area Sat M30 driver so I think you can use it only on this laptop.

  take easy B-)

• Satellite M30: How disable the BIOS boot password?

  Hello

  Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

  Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.

  THX,

  Werner.

  PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.

  Hello

  I found a step by step explanation to clear a BIOS password:

  "Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

  Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

  Press the F1 key. This will start the device in the BIOS Setup mode.

  Using the arrow keys or tab, move to the password field and select REGISTERED.

  Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

  Hope this will help you.
  Good bye