Satellite 4100XCDT: how the IRDA port works under DOS
I have a Toshiba Satellite 4100xcdt. How do I assign a COM port to the IRDA (infrared) port in the BACK so I can use programs such as Winsamp
http://www.veg.Nildram.co.UK/remote.htm
The BIOS assigns COM1 and COM2 serial port to the built-in modem. However there is not a single option for the IRDA port not found.
How can I make the IRDA port works under DOS?
In my opinion it of not possible to use the IrDA DOS, because drivers must be installed and initialized.
The IrDA port driver is a common Windows driver and the irda connection works only when windows was loaded
Tags: Toshiba
Similar Questions
-
Satellite A60-124: using the IrDA port to transfer the data to the mobile phone
Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.
The device setting menu shows my port Irda ok and seems to be enabled. What should I do?
I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.
In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
Remember that the mobile phone IrDA window is in the right position. -
OLE1. CreateEmbed Bit_str, "Paint.Picture" works under Dos but does more when gave birth off the coast. How can I fix teachix? Using VB5 to obtain a bitmap for embeded in an Access database. This used to work perfectly, but gives an Error 31032 when the program is spawned off the coast. It still works from a command prompt. How I have the code around this, or what is the problem? Help, please. Thank you
Hi AllisonBlackmer,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
Hope the helps of information.
-
Qosmio F20-154: Re-activating the IrDA port
Hi, some time ago I disabled the ir on my qosmio F20-154 port, as I saw no need.
Now half a year later, I've forgotten how to get it (for a new laptop).
I see very little in the manual wonder, if I need to use the remote control receiver?Concerning
HansHello
You forgot how to activate the IrDA? ;)
As far as I know the IrDA port is not available on this device.Check Device Manager if there is no IrDA devices appears.
I think that you will find nothing, because there is no such thing as the IrDA port.Of course, it is possible that you received an IrDA device for the use of the remote control, but you cannot use it to transfer files.
-
I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP
I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.
O/S
Windows XP Pro 32-Bit
CENTRAL PROCESSING UNIT
Intel Pentium 4 2.80 GHz
Motherboard
Manufacturer - Eveshamvale.
Vend. ATI chipset.
Chipset model - ID5833.
Model Southbridge - SB200
The downloaded manual provides the following information
Model = P4SBA
= North Bridge chipset; SiS 651 - South Bridge SiS 962
CPU = Supports Socket 478 - Supports 400/533 MHz FSB
I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.
Hi Graham,
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the problem, the USB ports don't work on Windows 7 computer.
I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.
Method 1
Run this fix - it and check if it helps.
Diagnose and automatically fix the Windows USB problems
http://support.Microsoft.com/mats/Windows_USB_diagnostics
Method 2
Reinstall the USB controllers.
This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.
It will be useful.
Let us know if you encounter problems with Windows in the future. We will be happy to help you.
-
HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III
HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III
I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache
Thank you
The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.
6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:
Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
How the Agent Install works?
Can someone explain in simple terms how the agent install works?
-wernHello
Procedure how to install the work of agent deployment:
================================1 local pr-reqs (ssh, writables)
2 remote connection pre-reqs (compatibility, certified, space to check, cygwin, port, packs of cygwin, permissions, host name of the user, inventory)
3 phase installation (ssh tracks, copy these files, unzip and then unjar, installs)
+ Please let me know if you need more explanation on this.
Thank you
Vincent -
How the prisma app works on mac after downloading itunes
How the prisma app works on mac after downloading itunes
I don't think they have a Mac version. The following a https://itunes.apple.com/us/app/prisma-art-photo-editor-free/id1122649984?mt=8 present in the compatibility section in the left column that it is compatible with iPhone, iPad and iPod Touch. Applications you download through iTunes to a Mac would be then be synchronized the Mac one of these devices.
Store applications designed for the Mac can be downloaded from the Mac App via the Apple menu > App Store and iTunes is not involved.
-
Satellite L - a single USB port works
Hello
I've had this laptop for a few months and I could not do all the USB ports work, the system recognizes all the but work alone. If I check the system it says ports are working properly and that it has the latest driver but when I do anything, a mouse, USB KEY, connect headsets to listen nothing, only one of the ports to recognize hardware.
Can someone help me?
Hi alecarrill63,
It would be interesting to know what laptop you have exactly and what operating system you are using.
Can you post this important information?In your case, I will try to update the Web from Toshiba site chipset driver
But theoretically, if only a single USB port works, the other ports may be defective and therefore, it would be necessary to replace the motherboard. :(
-
Tecra A3x: Is the IrDA Port available?
Hi can someone confirm whether or not the Tecra A3x (PTA3XE-01D00NEN) has to a port infra-red or not.
Thanks Jason
Hello
No, the IrDA port is not available on the Tecra A3X
concerning
-
How the cloning process works in the background?
VMware dear Experts,
I want to know "How the cloning process works in the background?", according to my understanding is it works like this
(1) instant a VM cloned
(2) recording a virtual machine to a destination host
(3) copy the hard of the files to a destination host
(4) commit the Flash disk to the destination host (changed blocks r commited)
Peut sum1 brief the cloning process...
Concerning
Mr. VMware
Almost correct, step 4 the Flash disk gets committed to the VM source not destination of VM, does start with a hot-clone vCenter no change after the clone operation (i.e. the snapshot has been added to the source of the VM) will be written to the destination virtual machine.
If you use VMware Converter, it has an option to "sync" can you consult so that it does several passes to pick up all the changes of the past during the clone operation.
One more thing to remember it is hot-clones consistent crash so there is the possibility of losing data, although from my experience there has never been a problem.
-
Satellite A100: How to use the IrDA port with cell phone?
I have a laptop with an infrared port that I can use with another computer.
Now, I have a problem with my laptop at home, A100 series.
I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?Thank you
PetriDon't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
What cell phone do you have exactly? Satellite A100-xxxIrDA option appears in the control panel?
-
Cannot connect to my Satellite M30-106 of the mobile phone using the IrDA port
Hello
I'm trying to connect my phone to my laptop via the infrared port, but the phone tells me it cannot detect all devices when I put it right next to the port of FIR. Some how do I need to activate it first? The device manager says that the device works, but how to check?
I've never used this facility before on this pc. Can anyone help?I googled for your model type and it has an infrared port for sure.
Maybe you should remove from Device Manager and then do a restart, so can reinstall windows? That might help, but I Don t know if he would.
See you soon
-
Satellite 4100XCDT: how to set up the monitor
Hello
I recently bought a Satellite 4100XCDT, he had no operating system, so I installed Windows 98 Second edition on it. I installed the audio driver and the graphics driver and they work fine, but I can't configure the monitor. Whenever I start it detects TWO monitors plug-and-play for some reason any. I can't see a driver on the Toshiba site and don't know what to do. I tried setting up as a Billboard Mobile, but failed.I hope someone can help,
Thank you.Hello
On the download from Toshiba site there is display driver for Win98SE (version 6.45.5441 - 58.22). Try to use it.
http://support.toshiba-tro.de/tools/satellite/s4070-90-100/Windows-95-98/Windows-98/display-Win98-64554415822.zip
Good bye
-
Satellite L305D-S5873 - touchpad does not work under Win XP
HUGE problem
Key Satellite L305D - S5873 DOESN'T work under XP.I am with XP now and doesn't work, while I had Vista it worked and he stopped.
Then I installed the xp and still, it does not.Hello
So you say that the touchpad works properly using the Vista operating system, but you are not able by using the touchpad running Win XP.
Is this good?If Yes, then I think that you have not installed the XP drivers good touchpad.
Satellite L305 belongs to the Toshiba U.S. series and you should visit the Toshiba driver page us to get XP drivers
Sorry, but for me it s a clear case. It's a softer question, and possibly the right driver installation is required.
Maybe you are looking for
-
Satellite A110-195_model not presented on the Toshiba driver downloads
Hello After searching Toshiba "Drivers & downloads", I can't follow the Satellite * A110-195 * model...I have enter the serial number and is here with family models (2)... A110 - 195 (PSABO)A110 - 195 (PSAB6) This model is discontinued and removed fr
-
Pavilion DV4-1199es problem with sound
Hello I have a Pavilion DV4-1199es, I did a downgrade to Windows XP, and I did it works ok, but when restart the laptop, the sound does not work. If I install MS patch KB888111xpsp2 or KB835221 immediately again works the sound, but when restart work
-
Trackball blackBerry Smartphones has decide to stop working or only when he feels like it
Hi Please help the trackball on my 9300 stopped working, I have taken battery out and rebooted but still not good ideas please x
-
Rescue and recovery and windows 8.1
Hello For the last 4 years, I used Rescue and Recovery on the my ThinkPad to keep backups (really liked the functionality of incremental backup) and restore unique when files necessary. I have now just received a new X 1 carbon gen3 coming with defau
-
I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know