Cannot connect Xbox 360 Elite to runnings Windows Vista PC

After surfing the internet for hours, I really need help with this problem...

I am trying to connect my Xbox 360 Elite to my PC running Windows Vista Home Premium (32 bit).

I can connect to Xbox Live without any problems, and the Xbox also appears in the network view in Windows (and in WMP11 media sharing).

The Xbox also discovers the PC and COMPUTERNAME:username display on the screen. But when I try to connect the Xbox since it does not work. I have tried many solutions and advice found on the internet, but I can't work.

I also tried to use the Media Center and connect the Xbox as an Extender. Does not work either.

Is there a setting somewhere in Vista that keeps me?

Hi Christian,

·        You receive an error message when you try to connect to the Xbox?

·        You are able to access the Xbox from the PC?

You can try to temporarily disable the security software and third-party firewall on the computer and check if you can access the computer of Xbox. If you are able to access, you can contact the manufacturer of security software and firewall manufacturer to check if you need to change the settings. Subsequently re - activate the firewall and security software after verification.

You can also post your question on the xbox forum and check if you can find any suggestion that can be tried to solve the problem of connectivity to the xbox. Access the link below to post your question in the Xbox forum.

http://forums.Xbox.com/

I hope this helps. Let us know the results.

Thank you and best regards,
Srinivas R
Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Publisher cannot connect XBOX 360 controller wireless receiver PC on Windows 7.

    I can't connect a XBOX 360 controller to my PC with the receiver wireless on Windows 7 (64-bit). I have correctly installed the driver, and the wireless receiver is recognized by the PC. The problem occurs when I try to connect the controller to the receiver, as do not connect or recognize each other. I press the Connect button on the receiver, then the light starts flashing. I then press and hold the connection button on my controller, which makes the quadrants "search for", but they quickly cease, and instead assign a specific quadrant, all quadrants begin to Flash instead, as before. Nothing seems to work, I have tried to unplug all other USB devices and wireless, connecting the receiver to different USB ports and change the batteries. What should I do now?

    Hello

    I suggest that you follow the steps in the article below:

    http://www.Microsoft.com/NZ/DigitalLife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

  • Can I play Xbox 360 games on my Windows Vista laptop?

    From: Scott

    I just got a new laptop because my old is dead and it is running vista and it has a socket to plug a x box 360 control in and theres all this hype x box 360 and vista together so I was wondering, that would happen if I stick a 360 game disc in the computer. so, what would I be able to play this match as if it were a x box 360 with a computer instead of a TV screen or it would destroy my laptop I need to know. I mean I'd be pised if I went and spent the money on a 360 and then discovered that I could have just played on my computer.

    To put it simply, can I play a box x / x box 360 game on my laptop.

    From: Dale M. White

    Simple answer No

    Longer answer, no. Xbox306 games are written for PowerPC, which if I remember correctly a RISC based chips and Intels\AMDs are CISC based chips.

    The excitement of Xbox360 and Vista, was more in the sense to implement the sharing of multimedia files and at some point, but always on paper. Set up the games between a PC and a Player X 360, through their Xbox live, to talk to inluce to link your xbox live with the X 360 has.

    Another response of the community of Windows Vista discussion groups

  • Connect xbox 360 Windows 8 controller

    I'm trying to connect my xbox 360 controller to my Windows 8.1 by the power cord.  I downloaded the required driver ( https://www.microsoft.com/hardware/en-ca/d/xbox-360-controller-for-windows ) and the controller is recognized under devices [A], but it is not recognized as a controller under devices and printers [B] or he appear in joy.cpl or work in games.

    A                                                                     B

    Things I've tried so far:

    1. different (if working) USB port
    2. different (if working) controller
    3. different (if working) cables
    4. new batteries
    5. just turn on or off
    6. Download and reinstall the driver
    7. installed different versions of the driver
    8. different operating systems of the driver installed
    9. driver installed in compatibility mode
    10. https://support.Xbox.com/ro-ro/Xbox-360/accessories/connect-wired-controller-computer

    I ran out of things to try.

    I appreciate any help, thanks.

    Hello

    Since then, the problem is with the controller Xbox 360 that I suggest you to send your request to technical support of Xbox forum.
    http://forums.Xbox.com/xbox_early_access/xbox_on_win10_ip/default.aspx

    Hope that this helps, if you need further help please write us back we will be happy to help you.
    Concerning

  • Configuration of the console Xbox 360 for attach to Windows Media Center

    I'm following the steps to connect my Windows 7 Media Center to my Xbox 360 Elite. When I try to download http://www.xbox.com/pcsetupsoftware, I get a page "in search of something to Xbox.com".  Any ideas what should be the correct url?

    Imran

    Hello.

    Don't bother to go on the site, all the software you need is included in Windows Vista/7.  Just open Media Center and go to add Extender and follow the steps on the screen. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • How to connect Xbox 360 TV

    Original title: just got an xbox

    just got an xbox and am trying to use the hdmi cable, I use av lead too. When hdmi lead pluged we have white srcreen tv. How to get back on this

    Hi Dave,.

    Welcome to Microsoft Community where you can find all the answers related to Windows.

    According to the description, it seems that you are trying to connect the Xbox to the television.

    I have these steps that should help you with this problem.

    Visit this link and try the steps mentioned in this link:

    http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/connect-Xbox-360-console-TV

    In addition, visit this link to contact Xbox support for assistance.

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • My xbox 360 elite has 3 lights on this is my 3 xbox console rd for this do and im not happy about this at all, please can you me how to send again to be repaired im in Ireland, my email is < email removed for privacy >

    problems with my xbox 360 elite

    Hello-
    I found this article which deals with three lights on:
    http://support.Microsoft.com/default.aspx/KB/907534/en-us
    Barb winter
    Program Manager of Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If you get the answer to your question, please go back and mark the reply as an answer while others may find it.

    If you get helped by a response to someone else's question, please indicate the useful post.

  • Cannot complete the update of security for Windows Vista (KB2961072)

    I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

    I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

  • Cannot connect to internet after auto update under Vista.

    Original title: System shows the connection, but cannot connect

    After an automatic update in Vista in mid-August I can no longer connect to the internet.  My system tray shows that I am connected but I can't.  I'm on a DSL wireless connection with a desktop computer (one does not) and a laptop with XP that always works very well.  I re - configure the modem, uninstalled, and reinstalled the wireless card, has run an anti-virus in safemode, uninstalled the Qwest connection network and re-installed AND uninstalled the update to Vista.  I even tried the system restore to an earlier time.  Nothing.  Internet diagnosis says that it cannot solve the problem.  I have read other forums on the UN-checing proxy settings but mine have not been verified.  I re-set my settings IE8 by default.  Uninstall protection against viruses... What did I miss?

    Hi dozerman5676,

    -You receive an error message/code when you try to connect to the internet?

    Follow the steps below:

    Method 1:

    Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:

    The problems of Internet connection

    Method 2: Reset Internet Protocol (TCP/IP)

     

    To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.

    See How to reset the Internet Protocol (TCP/IP)

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Windows Vista Home Premium cannot find Xbox 360 as extender

    This may be long but im giving information as possible.

    I'm good with the computer. My Vista Home Premium computer cannot find my xbox 360 as an Extender. When I use the WIndows media player 11 and share, he sees my xbox very well. Zune software, same thing. My xbox 360 is here no problem on my network in "My Network Places".

    In Media Center, once I typed the 8 digit number it is said that he can not find the Extender. I did the following:

    Reset my router
    Reformat my computer
    Reset my xbox 360
    Double checked I got the right 8-digit number in media center
    Disabled windows firewall
    Went to the tab exceptions and compatible: WIndows Media Center, Media Center Extender, eshell.exe, discovery network
    went to the management of the computer and turned on UPnP device host (changed the startup type to automatic and restarted my computer)
    Permit "filter multicast" in my router settings
    UPnp enabled in my router settings
    Upgrade Vista (with SP1 as well)
    Re-installed the drivers for my wireless card
    Connected to the Xbox 360 WIRED to my router

    Heres the funny thing, I have a Sony laptop vaio with Windows Media Center Edition 2005 on the same network that sees my xbox all the time. Its actually connected through a microsoft extension program (XboxMCE05Lite - enu.exe) basically it works fine.

    One funny thing that may help with my vista (Home premium) Windows Remote Assistant machine fails or the other.

    Any ideas? If this can help, too, this computer is built on the ground.  Sense, this isn't a HP, Dell, Sony, etc.

    Network equipment:
    Router Linksys WRT54G
    Map of Netgear WG311v3 54 Mbps Wireless

    works fine with my other laptop. So I guess that the problem must be my wireless card. I guess that's a PCI card it would have nothing to do with the problem. I'm going tomorrow to buy a NIC. USB Im not in a race simply because my internet works very well without getting a new network card. I am just puzzled and would like to get this to work because I hate running through computer problems and in abeyance. I'll get one tomorrow and let you know the guy.

  • Problems connecting Xbox 360 to Windows Media Center on PC running Windows7 professional

    I get an error when I try to configure my xbox and pc with media center.

    Configuration error

    An error occurred when setting up your computer for use with this extension.

    Journal name: Media Center
    Source: Microsoft-Windows Media Center Extender
    Date: 2010-08-15 22:15:22
    Event ID: 545
    Task category: Configuration
    Level: error
    Keywords:
    User: xxxxxxxxxx
    Computer: xxxxxxxxx
    Description:
    Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0017FA67DAA3.

    Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.

    Every time I try it I get the same six news and an error in the Event Viewer log.

    1 Media Center Extender configuration started with the following parameters: affiliate code: 788

    2 Media Center Extender Setup has determined that the Windows Firewall is enabled in the profile of the House.

    3 Media Center Extender Setup found the following firewall: Norton Internet Security

    4 Media Center Extender is found:

    ID: uuid:10000000-0000-0000-0200-0017FA67DAA3

    IP address: 192.168.1.3

    Interface GUID: {0d143a51-fd83-4860-982e-93c34f2055db}

    NHED type: X 02

    5. software Media Center Extender was sent to 'uuid:10000000-0000-0000-0200-0017FA67DAA3' Extender.

    Software version: 0 x 20656804

    6 Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-0017FA67DAA3' found at address 192.168.1.3.

    And then the error:

    Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0017FA67DAA3.

    Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.

    Anyone got any suggestions?

    Affiliate code: 788

    other than running
     
    sfc/scannow
     
    to check system files, in view of the question with the newly created accounts and the fact
    than you
     
    > I took out my Windows7 disk and ran a? upgrade? hoping that this would fix file what either seems to be corrupted, but the question remains.
     
    I would say that if you reformat and clean install, you don't have much chance.
    I'm sorry.
     
    The game, 19 August 2010 00:28:55 + 0000, lcypher wrote:
     
    > I get no new account that I put in place to connect, they fail with the following message. ? The user profile Service has not logon. User profile cannot be loaded. ? He comes up with new admin accounts standard, my current admin and still function of standard accounts. Seems to me that my problems (now two) could very well be related. I got out my Windows7 disk and ran a? upgrade? hoping that this would fix file what either seems to be corrupted, but the question remains. I try to find a solution that does not involve a new hard disc or renovated and complete reinstall, but no hope now. My next step, I guess that would receive technical support from Microsoft but that grinds really me. Never had this problem with the years under NT and XP.
    >
    > Any other suggestions out there?
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Not able to connect Xbox 360 to Windows Media Center 2005 Extender.

    Original title: windows media center extender 2005 units.

    I'm trying to connect my Xbox 360 to my computer Media Center XP 2005.  The computer recognizes the xbox but when I start Media Center, I don't have an option 'task' add the Extender.  I checked Microsoft updates and I'm updating but it seems that my software is not.  Can you suggest how can I fix?

    Thank you

    Nyla

    Hi Amar,

    You can follow this link & check if the problem persists:

    How to configure your console Xbox 360 as a Media Center Extender?

    Hope the helps of information.

  • How to connect a xbox 360 controller to a windows XP PC?

    With the help of a USB adapter that plugs into the top of a wireless controller. I installed the drivers and 360 accessories, but my xbox controller will not connect to my PC. Windows recognizes the controller when it is connected, but the controller will not connect.

    Hello AlexB2008,

    You can refer the links that will give you information on connecting Xbox controller below:

    Connect a game controller

    Xbox 360 Setup

    Xbox 360 Wireless Controller: Controller disconnects or is unable to connect to your console

  • Cannot connect XBox Media Center PC. Telling me there are problems of connection or firewall issues. Check the windows firewall. I'm a noob to all the rest. Help!

    I checked the windows firewall. Only other thing I'm running is microsoft security essentials. I use At & t UVerse for cable and internet.

    I'm a noob to computer. Help!

    Hello

    · What is the exact error message that you receive with the error code as appropriate?

    You can try the steps listed in the links below and check if it helps: Configure the Windows Media Center Extender Firewall: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/firewall/winfirewall.mspx

    As he tried to connect your console Xbox 360 as a Media Center Extender, you receive the error message: 'Xbox 360 not found': http://support.microsoft.com/kb/911129

  • The headset audio USB deforms after initially connect xbox 360 controller for windows

    Hello world.

    It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

    Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

    I have Windows XP Home SP3.

    writing in the new message: * e-mail address is removed from the privacy... *

    Hello world.

    It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

    Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

    I have Windows XP Home SP3.

    The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

    I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

    http://www.Newegg.com/product/product.aspx?item=N82E16817182168

    I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

    SC Tom
    -There is no such thing as TMI if you request technical support.

Maybe you are looking for

  • FPGA CompactRIO FPGA serial number

    How can I programmatically determine the serial number from the backplane compactRIO FPGA?

  • Dynamic creation of a control based on the input

    Hello Is it possible to change a control on the front panel? If the entry is a string I want to show a string. If the input is an integer, I want to show a cursor for example. I have a plan to implement on the different tabs and display the tab which

  • my mail is blocke, what can I do?

    my mail is blocked, I have now the cause and when I try to unlock it by code sent to my mail alternaitive it accept my new password then says sorry please try again thought he has change my password please tell what can I do?

  • Explorer.exe hangs in the shell32.dll file

    When I right click on the directories in Windows Explorer, the Explorer stops and restarts.  This only seems to happen when I right click on a disk or a file, just a directory.  Here is what I get in the event viewer: - - 1000 2 100 0 x 8000000000000

  • Tracert problem... Incredible

    Hello Sorry to be so stupid, but I really began to doubt not in my skills. I have a PIX 515e with OS 7.0 (1), I have an internal machine that is statically from a public IP address by using a static command. very simple question, how can trace route