Cannot copy files from USB key!

Similar Questions

• Cannot copy files from HD to CD by using wizard.

  Original title: not accessible - incorrect function.

  Cannot copy files from HD to CD by using wizard. Have been able to do for a long time. Without warning is no longer possible.

  Hello

  The format of the files you want to copy basically described what kind of files they are. Word documents, of .mpg, jpeg, etc.
  However, it seems that the problem is with the drive itself, not individual files.

  You happen to have any installed Roxio program? Specifically, Roxio Easy CD Creator?
  If so, you should remove this program, restart the computer and try again.
  I hope this helps!

• Cannot copy files from a USB USB Kingston on WD external hard drive

  When I try to copy large groups of a Kingston DT101 (32 GB Tumbdrive) files on an external hard drive WD (WD3200MLSP: 32 GB) the computer does nothing and there is no "Copy" dialog box I've uninstalled and reinstalled the drivers but it does not work. However, when I copy only the sections of the USB hard disk, then copy works. I use the Ctrl + C to copy the files and the light on the USB flashes on then off. Then, when I navigate to the folder on the hard drive and I press Ctrl + V to paste the files, the light on the USB key turns on and remains lit. However, the lights on the hard drive WD do nothing.

  It depends on the size of the file.

  It files are 4GBs or more and the player is formatterd to FAT32, it will not transfer due to limitations of size of FAT32 file transfer...

  See you soon.

  Mick Murphy - Microsoft partner

• The VM cannot copy files from a network share on the host

  I get the error "unable to copy xyz123: cannot read from the source file or disk.» When you try to copy a file to a shared folder.

  • The shared folder is located on the machine called VM-SERVER, which runs in Workstation 6.0.4. The folder is shared with everyone having full control. Security settings say that DOMAIN\Domain users also have complete control.

  • Any user who connects to any guest VM on VM-SERVER, which is the host of all the VMS in the Organization, can not access the file for copying, although registration to the directory is there (although slow to come). If the same user connects to any other computer on the network, any computer of VM-no-prompt, then he can access the files on the share on VM-SERVER with no problems.

  • VM' are the guest all configured with Bridged networking like they serve other users on the network. I disable the VMWare adapters. I insert the DisableDos key with a value of 1 as indicated by the FAQ, I restart the VM host operating system and the virtual computer guests.

  • VM-SERVER running Windows Server 2003 R2 x 64. It has 2 1 TB SATA drives, and the action in question is physically located on the D: drive.

  • The VM guest OS are XP Sp3, Vista Sp1, Windows Server 2003 R2 x 32 Business.

  • None of these comments VM are able to access the contents of the files on the share on VM-SERVER.

  • All computer virtual guests are able to access shares located on another server, the primary domain controller of the network that is running Windows Server 2003 R2 x 32.

  Accordingly, I'm worried because the concept of the virtual computer for critical business was my decision and up to the exception of this scenario (and a recently resolved USB printing problem) it went well. Unfortunately even a mess can stop production.

  Note that I have read the FAQ and tried the suggestions that seemed to apply.  I also looked in the forums and haven't seen a specific question/answer.  If there is an answer out there and you read this point please make me, orperhaps you have another suggestion?  I am open to all theories and possible solutions.

  jorilla wrote:

  The card is a RealTek RTL8139/810 x Family Fast Ethernet NIC driver 5.699.717.2008 Version

  Maybe see if a new NIC driver help? I see that 5.707 (2008/11/24) seems to be available:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=6&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  ====

  Is there anything in the event logs of the host?  I know that before I did this DisableDOS registry change on my server I've seen a lot of errors in the event log.

• Cannot delete files from USB HDD CCC attached to Time Capsule

  Hello

  I use an external DRIVE (WD MyBook Studio) disc that contains two partitions: "CCC-Backup' (where Carbon Copy Cloner stores its backups/clones) and 'Media' (for my movie collection). This HARD drive was attached to my iMac, but now I have the seal to a Time Capsule via USB. Both partitions appear in the Finder and I can see all the data. So far so good.

  Now, I want to set up my backup of CCC from scratch. To free up space, delete the contents of the old 'CCC Backup' partition. First of all, I see a message like "XXX.XXX current objects of deletion":

  

  But then, after a while, I receive a message telling me that the deletion failed because I do not have the appropriate privileges (I am admin on my iMac, however).

  I have no idea if this is a related question CCC or if it could be due to the fact that the HARD drive is now connected to the time Capsule? Could someone please give me a tip how I'll be able to remove the old CCC where backup files?

  When the hard drive is plugged into the TC it indeed belongs to the TC. You must create a directory on the drive of your computer to be the owner of this particular directory. But what you do when the drive is connected to your computer is ignored when plugged into the network, it is owned by the network device.

  So the solution is very simple... Plug it into your computer, wipe the partition and then plug it into the TC.

  You must use sparsebundle then CCC for backup. It is important to understand that the CCC as Time Machine backup impossible similarly to a network drive.

• Cannot copy files from C drive to external hard drive

  Original title: backup on external hard drive

  Can someone tell me how you back up C: drive of your computer on a hard drive external?  Unable to find mention of this anywhere.  Tried a right 'copy' but that doesn't seem to work.  Thank you.

  Hello

  1. what exactly is the error message you get?

  2. in which the reader is the installed operating system?

  Operating system files can be copied to another drive. If it is installed in the c drive, and if you try to copy as well, then try to copy only your personal files such as photos, emails.

  Respond with more information so that we can better help you.

  I suggest you to use the engine to find a software for creating image of your favorite search system.

  Warning: Using third-party software can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also use the Windows Easy Transfer to transfer files.

  It automatically copy your files, photos, music, e-mail, settings, and more to your new Windows Vista PC based. This software allows you to transfer data with cables of simple transfer or through a network, external drive, or a CD/DVD.

  See the following site:

  Windows Easy Transfer for Windows XP

  http://www.microsoft.com/en-us/download/details.aspx?id=7349.

• Cannot copy files from my laptop on external drives

  I am trying to copy my laptop on USB / HDD (any file, any size), but unable to do the same. Error: Impossible to proceed, please check if the disc is write protected. But when the same flash drive or a hard drive is used in the other laptop / PC to cope, his works very well. How to solve the problem with my laptop? Please suggest...

  Made laptop: Toshiba, WinXP... bit32

  I'm running out of ideas, but I found a site with other suggestions.  Try the following:

  <>http://www.Centon.com/support/resources/product-forum/2-FAQ/21-USB-drives-being-reported-as-write-protected >

  HTH,

  JW

• Cannot copy files from Windows XP during installation.

  While Windows reset through the repair track (not the console repair) using the original disk of XP, 44 files could not be copied. I turned off the antivirus Avast. Then again 29 files (including the migregdb.ex_) could not be copied. Once the process is completed the win XP works, I can connect to the internet and exploit all the programs, BUT research, help and Support, and then Windows Update stopped working. No idea how to overcome the problem of file copy will be appreciated.
  Alex

  Hello

  Disconnect all external devices to your computer and see if it works.

  You can also use a different Windows XP installation disk and check if the problem exists.

• Cannot copy files from a corrupted on a new user acct

  For some reason my user account was in sashes. I wasn't able to access the system restore. I did a restore and it allowed me to create new user accounts that my old files were still on the drive under the old user acct, I am not able to copy on. I tried to use the procedure described in article 811151 but the old user account folder is not accessible (access denied). I tried to change the permissions under safe mode, but that makes no difference. Any ideas?

  Article Microsoft KB811151 will not work as described if you reinstall as you.  The problem you have now is one of the owner.  The following article should allow you to adapt your old files and a directory and to regain access:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Bridges, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? No Tech phone today?

  To all

  In Bridge, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? (No phone Tech Saturday?)

  Thanks for the quick responses today from anyone in the community,

  -Mark, Portland Oregon

  Please provide details: you are not trying to change the file type by changing just the extension, are you?  That won't work of course,

  Either you try to run some type of script?

  To change a file type, you have TO open the file in Photoshop and do save as.  That can be automated.

• I need to copy files from my USB DRIVE to the vmserver running RHEL 5

  I need to copy files from my USB DRIVE to the VMSERVER running RHEL 5

  I can tether the drive to my host, but my VMserver does not see the drive.

  Is there some way to copy files from to the VMserver USBDISK create through vSphere, ESXi

  bndwork

  Moved to VMware Server------General questions forum.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW