Cannot create global variables in calc Manager in 11.1.2.1
I am trying to create execution variables to use in calc Manager rules at the application level. But when I select the name of the Application and click Create new variable, that it gives me the dimensions used in my App list rather it gives some names of General dimension. I can create variables at the level of the plan type, but I'll try to avoid it.How can I create performance variables in Calc Manager rule to the application level?
Thank you
This is how the product works when it comes to global variables:
-During the creation of the global variables so only common dimensions are selectable (period, currency, entity, year, period, etc.) makes generic sense or defined by the user dimensions are the specific database because applications can have several common dimensions and other databases.
-At the database level dimensionality, you select the database of planning when creating variables that use the user defined dimensions and overall at a higher level when creating variables that uses common dimensions.
Reference: Creating calculation Manager Global Variables, not all Dimensions of Hyperion planning are available (Doc ID 1272807.1) on MOS.
HTH-
Jasmine.
Tags: Business Intelligence
Similar Questions
-
Hello
I'm looking for the best way to create global variables so that the script can run on all versions of adobe reader. I tried to gobal.varibaleName to the initialize event of the form, but this works only in earlier versions of the designer. I tried to use script variables, but there always Initializes the variable to the string value. I wrote some functions on the script object, and each time everything works fails, one count of global variable gets incremented. The event of the form potsave if the value of count is greater than 0, a simple warning message is displayed. Now how declare and initialize and increment this variable count so that the script can run on all versions of adobe reader?
You must change your code little...
First of all,
All Global Variables are of Type string. If you use a sign "+" to add a number it will treat the value as a string and add at the end.
So if you want to do digital calculations on global variables, first you need to convert to the type of law.
In the code below I am analysis the value of an Integer type first before I increment.
Second,
You have created a name variable 'count', which could be a reserved name. Try to avoid names reserved for variables. So I created a variable "intCount."
Third,
According to increment the value if you want to assign the value to a global variable you need to string conversion. (reverse as you earlier in step 1 by conversion string integer)
var a = parseInt (intCount.value) + 1; Step 1
intCount.value = a.toString (); Step 2
var b is parseInt (intCount.value) + 1;. Step 3
intCount.value = b.toString (); Step 4Thank you
Srini
-
How to create Global Variables in Essbase
Hi gurus,
In essbase automation, I saw generally the statement below.
Connection $1 identified by $2 $ 3;
and of course many other statements also.
1. now, my question is where and how can we create the variables ($1, $2 and $3).
2. they are Substitutinal Variables or Environment Variables.
Pls let me know in detail how to create and define the variables above.
I tried to create them as variables indirect in environmental assessments, but when you run the maxl order Login $1 $ 2 $3 its saying this $1.. variable cannot find etc.They are variable positional parameter and are passed in a maxl script, you can read all about it at:-http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/maxl_syntax_vars.htm#syntax_techref_proj_maxl_ddl_utils_shell_d0e227
See you soon
John
http://John-Goodwin.blogspot.com/ -
Cannot use Global Variable in the Structure of the event
I'm using LabVIEW 2009.
In my LabView project, I have a global Boolean variable called EStop. I can read and write the global variable. If I double click on the global variable, it takes me to EStop.vi which includes a text button. EStop.vi is part of my project.
In one of my report, I have a Structure of the event. If I go to one of the event handlers in this case Structure and right click and select Add event, I get a list of possible events. But this list does not EStop or an EStop events.
I would like to add an event to EStop case: changed value.
Why I can not add to a case of events events that include events on Global Variables as value changed?
How can I add EStop: event changed my structure of the event value.
-
global variables shared between several targets of RT
Hello
I'm looking for some information about variables shared between RT communication network.
Scenario: a PXI 'master' and several 'slave' PXIs running that screw RT. data is available in the form of a cluster of definied type on each slave PXIs (inside a non deterministic while loop). I guess I create global variables of network shared for each PXI slaves. A variable for each slave. I only write data in these variables in one place (above mentioned, while loops), on the PXIs slave. I need to read that data in a way with loss (I just need that value the most recent, as tags) from the master PXI.
Question: can I simply use "network shared variable" settings by default? I mean, I do not enable the option RT FIFO (single element), because I think that for a cluster that is a no go in the case of RT (variable length)?
What do you think? Or would you have better idea how to share data between slaves and masters RT targets (I do not have deterministic/losless transmissions, only these last values)?
I think that the way to proceed is to use the shared Variable Aliasing/binding - they allow you to 'link' shared variables in any of the multiple targets. https://forums.ni.com/t5/LabVIEW/Bind-Alias-shared-variable-to-scan-engine-variable/td-p/3290043.
You can also use shared variables of programming access to access running on another target: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/usingdynvarapi/
With regard to the other methods - you could always disseminate data via UDP multicast (or with a TCP/IP connection manager).
-
I have subVI´s of multiples that send data to the VI main when are called using global variables. Then the main VI must send these data to an another subVI´s called by an another VI main to show in its facades. It works perfectly when all SIX are executed in the LabVIEW environment, but when it's in main VI´s generation aplication, it's as if the global variables do not work because the data are always zero... I can´t find the cause of the error, I checked the construction features and there is nothing about the global variables, only the VI that located them in the summary project dependencies.
What could be the error?
You can use shared variables, you cannot use global variables. Shared variables can be local (on a PC) or network.
-
I'm in EMP 11.1.2.3.500
When I am trying to develop a business rule in the Calc Manager, I could able to create rules and scripts etc. but I see not the tool-> Option Variable that usually opens Variable Designer to create quickly run time variable.
Please advise if any change of necessary adjustment for the same or is it a bug /patch should be applied.
Thank you
KP
Hi PK,.
A bit difficult for the first time on 11.1.2.3.500. In the Sub screen shot under system view the second last icon will take you to the designer of the Variable.
Thank you
Vikram
-
How to create a Global Variable through the Project Explorer
Hello world!
I know how to create a global variable (in a vi through the range of functions...).
but I'm missing a way to create one via the Project Explorer.
It's a missing feature or just this documentation (and the intuition of myself) are missing?
It would be very convenient.
THX for your time and hope that answers.
jwscs
Right click on my computer > new > new... > select Global Variable.
EDIT: although I agree with Gerd (he probably wondering why you need so we can recommend a better way ), I rarely use them in easy to write once - read many applications such as security levels overall program at initialization (VER) to read later, but NOT modified. I know it would be better to make a good class, functional Global Variable (FGV) or a motor Action (AE) but globals ARE practical and safe IF used wisely.
-
How to create a global variable?
I want to create a global variable start button to control programs in the structure of the sequence. But I do not know how to creat it. Thanks for responding.
-
Original title: Device Manager empty
I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.
Hey Harcjk,
For your first question, go through this article.
None of the items appear in the device list manager when you open
http://support.Microsoft.com/kb/311504For the second question, here are some suggestions:
Method 1: Uninstall & install Parallels tools
NOTE: we highly recommend you make a backup of the virtual machine before you continue.
a. start your virtual machine and cancel the installation of Parallels Tools Wizard.
b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.
c. restart Windows.
d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.
Method 2: Uninstall antivirus software
If the problem persists, try the following:
Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.
Note: Don't forget to install the back antivirus software, once the problem is resolved.
Method 3: Uninstall, clean & install Parallels tools
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
a. If the problem persists, try the following:
b. start Windows.
c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.
d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.
e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.
f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.
g. restart Windows.
h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.
I hope this helps.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I tried to look at my device manager and go this message MMC cannot create a snap
I wasn't at the root droid to my husband, to see if the installation of the driver, have been, to my horror, saw NO Device Manager, just MMC cannot create a snap.
I think I'll probably have to do a clean re install to get this and a few other problems I've seen lately. Any suggestions?
Hi beckyandac
1. what other issues do face you?
2. for how long have you been faced with this problem?
3. did you of recent changes on the computer?
4. do you get error messages when you try to open Device Manager?Method 1:
Try opening the Device Manager by following the steps mentioned.
Click the Start button, then click on control panel - system and Maintenance, then select Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Method 2:
You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.See the link for further directions on scan SFC - below
http://support.Microsoft.com/kb/929833Method 3:
If the problem persists, you can check if you are facing the same question in the user account new or different administrator account. You can create a new user account on your computer, and then check.Create a new user account-
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountIf you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileI hope this helps.
-
ORA-12913 cannot create the dictionary managed during import tablespace
Greetings,
I'm a newbie om moving databases between servers.
I get the following error: "ora-12913 cannot create tablespace dictionary managed" when executing the data pump import. It is a 10.2.0.4 database that I'm moving from HP - UX PA-RISC to HP-UX-Itanium. It seems that all managed tablespaces locally were ok. Some of the successful dictionary tablespaces had problems (DRSYS, INDX, RBS, TOOLS)
Should I convert all tablespaces dictionary managed locally managed tablespaces before data pump export/import? Note that this is a very small database with little use, then what better practical performance I'd like to hear.
Thanks colin
Published by: YJC on Aug 17, 2010 15:16>
(1) should all be converted to Locall managed?
(2) can the RBS safely deleted, given that an UNDO tablespace that uses the DB.
>Only the SYSTEM will have to be migrated to managed locally. The RBS tablespace can be deleted if there is a separate UNDO tablespace and the database uses undo automatic management.
HTH
Srini -
My Dell Inspiron 1545 gives me this message and not going anywhere
«STOP: c000021a {fatal system error} The Session handle cannot create protected prefixes system process finished in unexpected ways with the status of 0xc000003a (0x00000000 0x00000000).» The system has been shur downwards. »
Any suggestion on how to solve this problem? Thank you
If all those who are unable to work, (they have not for me)... I have a Win7 pro running Toshiba Satalite, and after a few weeks to get slowly mad and furious... I did...
Went to the toshiba Web site updated BIOS drivers.
installed (all automatically)
Restarted
Fixed
------------------------------------------------------
all together took about 3 minutes. man, I was happy...Here is the link to your BIOS updated
http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WW1&OSL=en&SystemID=INSPIRON1545&CATID=-1&impid=-1
I hope this works...
-
Updated 11.1.2.3.500 to 700 for the IE11 support.
I installed the following hotfixes:
1 20675028 - SSP
2 20612400 - workspace
3 20643564 - hyperion Planning
4 20929659 - architect EPM (foundation server)
5 21292109 - Manager of calculation
6 20768325 - statement and analytical framework
7. 21240419 - ADF MLR
I deleted the directory tmp and cache on servers managed and the Planning0 and calcmgr0
(Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0)
History/cache deleted my Internet Explore.
When I go to the calculation Manager and try to open any business rule of calculation Manager I receive the following informational message: "Please try to reload the component script again." When you click on 'OK' I do not see any text in the business rule. (See attachment)
I can run the business rules of the application of planning successfully and I can see them under "Shared Services" and import/export business rules.Calculation of the Manager process runs on the server, the logs show no errors in the Oracle\Middleware\user_projects\epmsystem1\diagnostics directory
Tried to search for the message but could not find anything about this message.
Any suggestions?
OK, I think I understand what is happening, I noticed a difference between the user interface in your screenshots and it seems that you disabled for calc Manager ADF.
You will be able to confirm is that you run a report of registry and it will have a BINDOWS_ENABLED = true for the CALC_MANAGER_PRODUCT property
If I pass the ADF to bindows so I see the same problem, is there a reason you do not run ADF mode?
See you soon
John
-
I am new to animate. Please can you tell me how I can declare a global variable?
I try to have a single button that plays the next 10 frames, another button that plays the next 20 images. I put the event listeners for the buttons on the first image. I'm putting the code on the timeline each 10 images that works if the game has to stop. I would like to connect with some global Boolean values. The project is the html canvas.
It must be simple. Can you help me?
Scope of variables in canvas mode:
myVar = 1; variable is accessible everywhere in the current page
this.myVar = 1; variable is accessible in all the images of the current clip
var myVar = 1; variable is accessible in the current context only
So yes, the creation of a global variable is simple the most.
Maybe you are looking for
-
How to remove corruption Encarta Premium 2009
I have a corrupted Encarta Premium 2009 version and want to uninstall it, but the software uninstall program cannot find the file .iso of origin. How can I remove Encarta 2009? [Moved from comments]
-
The R500 volume buttons not working not not in flash windows like YouTube
The hardware volume control buttons work more by watching the video on the web, like YouTube. I have to click on next to the player on the Web page window or on the desktop, or something for orders button for you register and pay the volume/mute. It
-
Update installs the error code.
I have two window updates waiting to be installed, but whenever I try to install, I get an error message indicating that it may be a running program that will not allow the installation to occur. How to clear up this problem so that I can get the up
-
Outlook express database is plus sized
Thank you for your time. My boss at work use OE 6. His Inbox went above the limit of 2 GB, and all the emails they have disappeard. I made a copy of the inbox and compact emails dbx file. OE seems to have reset the Inbox. It is now receive emails. It
-
I get very frustrated with the activation tool. My Windows 7 Professional SP 1 is a copy retail that I bought on the shop online Microsoft a year ago. At one point I had to reinstall my operating system several times on the same machine and now when