Cannot create local adjustments in ACR

Similar Questions

• Cannot create local adjustment in RAW

  I just changed my images on RAW when all of a sudden, I guess that I pressed a wrong button (Yes you know these fractions of seconds where something happened and you don't know what you were doing) and now whenever I want to use the adjustment brush or graduated filter tool and I press on the top of the image it gives me the following message :

  ERROR:

  Cannot create the local equalization. All municipal equalization controls are set at

  no effect on this image

  It does not work on raw images now, I tried pressing "Reset Camera Raw Defaults" and it still does not work.

  Is there a setting that I moved without noticing?

  By the time this past I had 6 photos on camera Raw, I had synced their and I was making small adjustments on one of the images, I had finished using the graduated filter tool on an image when then all of a sudden it has stopped working

  Thank you very much for your help! I have to finish this project today and now I have to sit and wait to solve. Thanks again

  have you tried first to change the values to it before using the tool?

• Windows 7 64 bit cannot create local port through registry

  Hi all

  I write a vbs to create a local port to connect to our server to printer (ie the local port for \\PrintServer\PrintQueue1). I can create the succesfully local port by editing the registry HKLM\Software\Microsoft\Windows NT\CurrentVersion\Ports and restart the spooler service in Windows 7 32 bit. However, the same script can not create the port in Windows 7 64 bit. The registry has also been changed, but cannot create the local port after you restart the spooler service. Does anyone know what is difference between 32 and 64-bit Windows when creating the local port?

  Turns out in my case is a subtly incorrect registry key in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports].  Specifically, the (default) entry has existed as white.  Must read (value not set).  A solution is to export the key to a file... and are looking for online reading: @= "", open the file and delete this line, port of registry and Rename Ports.bad (for backup), and then import the file. "  That's what I did and it worked fine after restarting the spooler.  Another solution might be easier to remove the (default) entry, and then restart the spooler... In any case, I have now all my ports which survive a reboot.

• Cannot create local adjustment

  With CS5 and all worked fine u

  p at the moment. I tried to use

  one of the local adaptation (graduated filter) tools and got th

  e following message "all the adjustment local tools.

  are defined to have no effecton the image. That's happened?    They worked fin

  e 5 minutes ago. Any suggestions on how to solve the problem are appreciated.

  Thank you

  John has.

  CS5, Windows Vista

  This is because you said not all of the options on the right side, so just the paint would have had no effect on the image. Make the changes you want on the right side and then use the tool.

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• When you try to launch Lightroom 5cc message Lightroom cannot create a catalogue to local disk. cannot save changes to this place. any help please

  When I try to open Lightroom 5cc on my pc I get the message "Lightroom cannot create a catalog name of the catalog Lightroom 5 volume disk Local C because Lightroom can't save the changes to this place" I just upgraded to Windows 10 and worked fine on windows 7. Any help please?

  Hi bill.hughes3,

  Can you make sure that the images on your local disk folder has full read and write permissions and then try to create the catalog?

• Advance Mode XP Backup, twice after backup is complete, cannot create an ASR file because I did not insert a floppy disk. I insert a disc in my drive, please help me how do.

  Running a WindowsXP Professional, I tried twice to my systems backup using the Backup Wizard. Twice tried to use advanced mode to save. I have 3 choices, first Assistant backup, Second, Assistant food and finally Assistant recovery. I clicked on the wizard of recovery of automatic systems, the wizard to create a backup of the two parts of my systems, a diskette that has my systems settings and other media that contains a backup of my score of local systems.

  Twice I tried to insert a disc into my drive and started to click on column e ASR. so to start the long process of backing up my files, after almost two hours later my backup files already completed, a screen appears saying: this isn't in my Wizard floppy drive cannot create ASR inside. He needs a disc with an ASR info, more data backup systems to restore my computer if it meets a major systems failure. My problem is, how to set the disk to my systems before starting settings to back up my files and data with the systems Advance Recovery Wizard first. Thank you.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ntbackup_adv_backup_options.mspx?mfr=true

  It will be useful.

• I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  I can't join or create a group of houses in windows 7 it says my pc and laptop cannot create a how I should I followerd all articles I can find on the microsoft kills site

  Hey borq Queen,.

  Welcome back you hear. If, after completing all the steps below, you are still unable to create or join a homegroup, I think that the issue is to do with IP/V6.

  Check your setting of the adapter for IP/V6. Your network connection must have IPv6 enabled to create or join a homegroup. If it is disabled, follow the steps below to activate it.

  (1) right click on the network icon and select open network and sharing Center.

  (2) in the window that appears, select change the parameters of the map.

  (3) in the network connections window, select the connection to the Local network for the Integrated NIC, and then change the settings for this connection or the file > properties.

  (4) in the connection properties page, check the box for Internet Protocol Version 6 (TCP/IPv6).

  Close all windows and restart your system.

  Try to create a homegroup.

  You should be able to create or join one after the activation of the IP/V6.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Local adjustments - mobile applications.

  I want to make local adjustments to photos from my iPad but it seems that global settings can be made in mobile Lightroom. Some healing/cloning in fix, but how can I make local adjustments exposure, highlight or contrast? Given the opportunity to use your finger as a brush, looks like a logical function but I don't see that it is available in any of my mobile apps Adobe CC. Signs would be appreciated.

  You cannot currently do adjustments local in LrMobile, although I would expect that adobe would work on this subject. However, there are other mobile applications of CC like Photoshop Fix or Photoshop Mix that can help you. I think that Fix may be the one to try first, but I've not used it much and there may be another application that does the job.

• Dehaze saturates too. Would it not be part of the local adjustments?

  I just spent a week on the beach in the Mexico, and all the time, it was very foggy, so most of the pictures have a few fog especially in the sky and further. I could get a lot of details in the sky with the dehaze slider, but it also made the foreground too saturated.

  I think that it would be best if dehaze welding part of the tools of local like brushes adjustments and filters radial/degree.

  As everyone thinks? Is the cursor dehaze, what is it worth? Are there alternatives that avoid the over-saturation?

  Adobe, many of us have mentioned that the dehaze should have local adjustments. We'll see if this changes. As far as the saturation goes, we also talked and asked a color slider. For now, you can do a work around PS creating a virtual correction with the amount of dehaze you want, regardless of the color. Then do either one to get the color you like. Bring them both in the PS as a single file: files of layers, and layer with the strong dehaze as the top layer and the blending mode to luminosity.

• Cannot create the VSA cluster: Cluster subnet is invalid. Should not be "network address".

  Hello world!  I had two questions on a configuration current VSA that I'm doing for a client.  Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines.     Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.

  1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.

  2. I received, during the vsa cluster configuration, the error message:

  Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0

  Now, I saw the article on what it could probably be.  The gateway appears and is correct.  The problem is that I know that the default gateway is not the ping requests.  I corrected it but have not begun installation because of the question #1 above.  Since the gateway is now who responded, what would be the possible resolution.  Thanks in advance to all those who support!

  Hey Nate,

  You're right about the behavior of the cluster wizard.  It does not consume space and leave the space used by the existing virtual machines.  Once that adjust you network settings (an adresse.0 may be the entry door?)  You should be able to proceed with the creation of cluster.

  IKE

• "System.Exception: cannot create ActiveX component." at Microsoft.VisualBasic.Interaction.CreateObject (String ProgId, String ServerName)

  Hello

  I have a console application of .net that generate thumbnails of pdf files. This application has no user interface, and it works well as a stand-alone executable file.

  However, when I called this app services windows I get this error

  "System.Exception: cannot create ActiveX component." at Microsoft.VisualBasic.Interaction.CreateObject (String ProgId, String ServerName) at PDFThumbnail.Main (String [] args)"

  
  

  I learned that the "Session 0 ', home of the services, is quite an inhospitable home for ActiveX controls.

  
  

  It's the mistake of the SysInternals Process Monitor

  Machine default permission settings do not grant Local Activation permission for the COM with CLSID {FF76CB60-2E68-101B-B02E-04021C009402} server application and APPID unavailable to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  This CLSID {FF76CB60-2E68-101B-B02E-04021C009402} is mapped to (AcroExch.PDDoc on the registry.

  I have changed the ownership of this CLSID to administrator with full control in Component Services and I still get the same problem when the executable program pdfthumbnail is involke by services of the window.

  As an experience that when using the Acrobat Api (AcroExch.PDDoc) via windows services.

  Thank you.

  What I did to fix this problem of not being able to call the Acrobat of service, it's that I have created a windows Task Scheduler that listening to an event triggered by the windows service when the new pdf are created, and then start the console application that generates thumbnails.

  I hope this helps someone.

• Component ActiveX cannot create object. Error code 429. When exporting

  Hi all
  One of my users becomes the below error when exporting a mapping file to Excel, which he was able to do before. I guess that this should not be linked to the record of the adapter as user took before export.
  
  Log is below:
  
  
  * Start the journal entry for the Runtime Error FDM [2012-01-24-14: 21:33] *.
  
  --------------------------------------------------------------------------------
  ERROR:
  Code............................................. 429
  Description... Component ActiveX cannot create object
  Process... clsUtility.mRecordsetToExcel
  The component... upsWDataWindowDM
  Version.......................................... 1111
  Thread........................................... 15876
  
  IDENTIFICATION:
  User............................................. xxxxx
  Name of the computer... xxxxx
  App Name......................................... FDMAPP
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  ... Database server xxxxx
  Name of the database... hyp_fdm
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... HFM
  Location ID... 769
  Location Seg... 23
  Category......................................... Real
  ID of the category... 13
  Period........................................... Dec - 2010
  Period ID........................................ 31/12/2010
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  * Start the journal entry for the Runtime Error FDM [2012-01-24-14: 21:52] *.
  
  
  
  --------------------------------------------------------------------------------
  ERROR:
  Code............................................. 429
  Description... Component ActiveX cannot create object
  Process... clsUtility.mRecordsetToExcel
  The component... upsWDataWindowDM
  Version.......................................... 1111
  Thread........................................... 14044
  
  IDENTIFICATION:
  User............................................. xxxxxx
  Name of the computer... xxxxxx
  App Name......................................... FDMAPP
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  Server data... xxxxxx
  Name of the database... hyp_fdm
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... HFM
  Location ID... 769
  Location Seg... 23
  Category......................................... Real
  ID of the category... 13
  Period........................................... Dec - 2010
  Period ID........................................ 31/12/2010
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  
  Help, please.

  It's probably a DCOM object cannot create a file; You must have MS Excel / Office 2007 on the server.

  T

• ORA-12913 cannot create the dictionary managed during import tablespace

  Greetings,
  I'm a newbie om moving databases between servers.
  
  I get the following error: "ora-12913 cannot create tablespace dictionary managed" when executing the data pump import. It is a 10.2.0.4 database that I'm moving from HP - UX PA-RISC to HP-UX-Itanium. It seems that all managed tablespaces locally were ok. Some of the successful dictionary tablespaces had problems (DRSYS, INDX, RBS, TOOLS)
  
  Should I convert all tablespaces dictionary managed locally managed tablespaces before data pump export/import? Note that this is a very small database with little use, then what better practical performance I'd like to hear.
  
  Thanks colin
  
  Published by: YJC on Aug 17, 2010 15:16

  >
  (1) should all be converted to Locall managed?
  (2) can the RBS safely deleted, given that an UNDO tablespace that uses the DB.
  >

  Only the SYSTEM will have to be migrated to managed locally. The RBS tablespace can be deleted if there is a separate UNDO tablespace and the database uses undo automatic management.

  HTH
  Srini