New Sansa Clip + - no Menu?

Similar Questions

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

• New Sansa Clip + turns, but in a foreign language

  New Sansa Clip + never gave me the possibility to choose the region or language. Later, I tried to manually "Reinstall" the latest version firmware to restart, but following the instructions resulted in no improvement. Any suggestions?

  Thank you! It worked, so I'm on the road to recovery. I didn't argue with Amazon to return the thing. I had an older Clip which lasted many years and never gave me any problems, so I was concerned when this new one did not work properly out of the box.

• My NEW Sansa Clip 8 GB jump audio during playback

  Hi all!

  Yesterday, I bought a new Sansa Clip 8 GB with FM Radio and today I try. Well, some fat is a problem: my Sansa skips audio while playing songs, as happens when a scratched audio cd is reproduced (do understand you?).

  Initially, happened after one minute of play (on all the songs) but now it happens early on and listening is impossible.

  I don't understand what the problem is. The Sansa is NEW.

  Firmware version is 02.01.32A

  Any help would be greatly appreciated!

  Thank you.

  Giulio.

  Problem solved, after upgrading the firmware to the latest version, although the problem was not the firmware.

  The problem is on a fault line desing of the Sansa. The male jack to the headphones should NOT be inserted completely into the socket because otherwise, either you hear anything like that or you ear the Sansa jump audio. It's amazing. The engineers who designed, which should be fired instantly.

• new sansa clip more 8 GB not detected but charge

  I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

  Miikerman wrote:
  As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

  There is there the cables that don't transfer data, only the fee...

• Ruined my new Sansa Clip +?

  I know, I wasn't supposed to disconnect the drive before you eject the computer. But when the old computer of Windows XP does not recognize, I thought it was the only thing I could do.

  Now, the player is stuck on a screen that says 'unknown' and I can't get any of the buttons to work. It is not yet closed.

  My new mp3 player is completely destroyed?

  Try a "soft reset". Press and hold the power button for about 20 seconds.

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!

• Sansa Clip + 8 GB not recognized, windows 7

  Hello

  My new Sansa Clip + 8 GB is not recognized on my computer laptop windows 7.

  the message "Windows has stopped this device because it has reported problems. (Code 43) "is displayed when I click on the notification that appears

  any suggestions?

  FIGURED IT OUT!

  I can't use my mp3 player and dongle at the same time, his equal to 1 or the other!

  Thanks for your help

• My Sansa Clip + freezes on me

  I don't know what the problem with my new Sansa Clip +.

  It froze on me like, twice. I wouldn't play the next song, or he won't play at all. I have to restart.

  I hardly use it. I don't know what's the problem with him. I transfer my bad songs?

  And after formatting to remove things, use Kopymac (free Internet) during the transfer of files from your Mac - it prevents the creation/transfer of pesky admin file that creates the Mac, that cause the video to freeze.

• Sansa Clip won't play the slotradio card

  I have a new Sansa Clip + and buy a slotradio card at Radio Shack yesterday. When I insert the card (Yes, I'm Threading RAS) media refreshes; then I'll SlotRadio, right click, and then he says: "buy 1000 songs to... etc" and then nothing. What can I try?  I think I tried everything.

  I have not tried the other cards because it is brand new. Maybe I'll see if RadioShack will allow me to have another card.  Thank you.

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• Sansa Clip not recognized by computer - new problem

  All of a sudden my Sansa Clip is not recognized by my computer. I use MSC forced for a year and have seen the page referred by others with this problem. Nothing seems to work. Download the new firmware will it correct even if the device is not recognized? How the new firmware can be installed on the device?

  At present the Clip plays already charged music, but I can add more.

  Suggestions? Thank you.

  JEMcQ wrote:
  OK - I'm a model. I used a charging cable not provided by Sansa. This is why the computer was not recognizing the Clip. However, is there a way to NOT use forced MSC to connect? I use it since I updated the firmware to the last spring and my thumb is painful.

  Your firmware has USB mode in the settings? If so, switch to MSC there... problem solved!

• New firmware Sansa Clip (1 GB) = no music file?

  I just upgraded my Sansa Clip (1 GB) with the new Firmware, and when I plug it in, it does not my music files, how to bring them back? The music is still playing and everything, just at the moment where I Plug and click on the folder, it is not show them.

  Firmware updates usually restore the unit to the default USB, Auto Vice mode. It will connect to the PSG most of the time. If the files have been transferred in MSC mode, you do not see them unless in this mode. Go to settings > system settings > USB mode and switch to the MSC. Then re - connect and see if these files now appear.