Cannot create Recovery Disc Pavilion g7-1329wm. "will create thru process for a few minutes then"

Similar Questions

• Cannot create Alias name for Cardinal cannot right click maximum DF PROFI II CARD

  Cannot create Alias name for Cardinal cannot right click to the maximum example of MAX installation instructions, does not match what I see. See attached picture.

  At the suggestion of Ryan to technical support, I improved the VISA to 5.4.1 and the problem was solved.

  Thank you.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Just update 4 LR LR 6, so I find lightroom does not not like before.  He becomes very slow to open, when I go to 'Library' to 'Develop' or import of images the Apple beach ball will roll for a few minutes.  My iMac uses OS X worm

  Just updated LR 4-6, so I find lightroom does not not like before. LR 6 is very slow at the start, whenever I pass 'Library' to 'Develop' or import images, the Apple beach ball will roll for a few minutes first. My iMac uses OS X version 10.10.5 are all these compatibility issues?  What should I do to make it work better the lightroom?

  Please take a look at the article and follow: https://helpx.adobe.com/lightroom/kb/optimize-performance-lightroom.html

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

• HP mini 110 cannot use recovery discs - BIOS insists the hard drive test failed. Drive works on another computer.

  My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.

  I also had to order the recovery disks (intro to windows 7).

  In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)

  To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed.  Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.

  Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?

  Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.

  Thank you

  _______________________
  When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
  _______________________

  HI David

  Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.

  All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.

  To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.

  So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.

  Thanks for all your help and patience David.

• Cannot create an account for eprintcenter

  I am trying to create an account for the eprint centre, however when I enter my information and press 'create an account' it gives me errors.

  The screen tells me that my email address must match... However he never provided me with all the additional fields to add an email address.  He invites me with the same message about my password and once more there is no availiable field for me to type a password.

  So, I have been unable to create an account and Setup completely my new HP printer.

  Please notify

  Try using another browser. I've heard people with similar problems and the problem disappeared when they switch to Firefox.

• given that windows 8.1 cannot be installed on some computers there will be always updates for windows 8 too?

  in view of the fact that windows 8.1 can not be installed on a computer because of this thing called about Virtualization reguirements... will microsoft always updates for windows 8? and also it will never upgrade to internet explore 11? cause, it seems, windows 8 does not have an upgrade to internet explore 11 Internet Explore 10.

  1. http://support.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=Windows+8&Filter=FilterNO

  2. http://windows.microsoft.com/en-au/windows/lifecycle

• recovery disc pavilion g6

  Nice day! I need to buy or download recovery diskfor HP laptop Pavilion G6 - 1095ST (LP277EA #AB8). Burned the hard drive and now I can't restore the system, drivers and the utilitiesonthe new disk. Help please!

  Hello

  Here is another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot use recovery discs

  Hello

  I recently had some HARD drive problems on my T410i due to a failure. Since then I have not been able to start windows.

  I tried to use the factory recovery disks that I created, but unfortunately it doesn't seem to work either.

  If I load via disks "Rescue and Recovery" or the "valorization of the factory", I'm stuck on the screen that displays the logo black and white "Rescue and Recovery 4" (step 4 of the Guide) forever with no progress. The mouse cursor still responds, but nothing happens after that and he never makes the License Agreement dialog or recovery options.

  I tried to confirm that the HARD drive can still be recognized, by starting in Ubuntu Live. I am able to access my files via the Live boot CD.

  In all, any help is appreciated. At this point I don't mind this clean form as long as I can get the system (OS and drivers) upward and execution. I'm afraid to do a format because I don't know if I have the key of the OS (Windows 7) noted.

  Looks like there is a problem with your HARD drive. Ubuntu has a SMART tool that will check your diagnosis internal disks.

  https://help.Ubuntu.com/11.04/Ubuntu-help/disk-check.html

  If the player checked out okay I would delete the partition from Ubuntu inside tables (run ' cfdisk/dev/sda' starting inside a terminal as root). You should be able to restore from the recovery media after doing this.

  EDIT: You don't need the key of Windows with the recovery media because it uses a VLK (Volume License Key) and is procedure of the plant. However, the key is on the sticker of Windows license under the laptop battery.

• Satellite M70 - cannot install recovery disc

  Hello

  I had to remove the drive HARD Toshiba Satellite M70 for use on my Compaq laptop (Compaq HDD crashed). I had to install XP and other stuff after you have 2 left and used with a Compaq laptop with no problems. Now, I had a new HARD drive for compaq and fixed the Toshiba HDD back in.

  Using the recovery CD I wanted to restore the Toshiba to its original state.

  I have the recovery DVD-ROM product. F12 abd selection cd/dvd would not recovery.
  Error loading operating system is the message I get.

  I can even install with my other XP pro original cd.

  Once I put the HARD return drive to Compaq its job very well, I can even install XP.

  What is the cause. Is that it has nothing to do with the MBR?
  I am very familiar with computers so please give me a way out of this!

  Thank you all,.

  Kind regards

  Hello

  In my opinion, the case is clear. If you install the laptop with a normal installation of Microsoft disk and the HARD disk works fine in another computer it something wrong with the Toshiba Recovery disk, maybe it s scratched.

  What you can do is to install the laptop using the disc of Microsoft. Then download and install all the drivers from the Toshiba site.

  Alternative order you a new drive for recovery of an authorized service provider.

  It of your choice what you do. ;)

• Cannot create excel object for Excel 2007/Windows 7

  Hello everyone,
  The code below works fine for Excel 2003 / Windows XP/IE6 but does not work for Excel 2007/Windows 7/IE8.
  
  *********************
  application: = Client_OLE2. CREATE_OBJ ('Excel.Application');
  
  Client_OLE2. SET_PROPERTY (application, 'Visible', 'TRUE');
  
  workbooks: = Client_OLE2. Get_Obj_Property (application "Filing cabinets");
  
  args1: = Client_OLE2.create_arglist;
  ************************
  
  There is no error when running the form, debug, we found that the control ignores all of the code above.
  
  I use Oracle forms 10.1.2.3 and jre 1.6.0_16.
  
  Would appreciate your help in providing a solution for the above question.
  
  Thank you
  Anbu

  I recommend you try the following in the order I listed the.

  1 disable UAC. See here: http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off

  2. Add a SYNCHRONIZATION; After your first line of code (that you provided in the post - I guess that's all that)

  application := Client_OLE2.CREATE_OBJ('Excel.Application');
  SYNCHRONIZE;
  

  3 uninstall JRE 1.6.0_16 and reconfigure for use with the last one which is 1.6.0_21

  4. install the patch 9282569forms. This hotfix requires that you upgrade to Jacob to version 1.10.1. It will also take that you generate a new webutil.plx (new webutil.pll is included in the patch). Read the patch readme carefully before installing.

  Note that more recent versions of MS Office like '2007' have not been tested with 10.1.2 and webutil Forms, so it may not work properly if MS made changes to the structure of COM in their products.

• When I connect to XP, if I'm not actively something for a few minutes I logoff and will have to retype my connection again. How can I change the time that remains active?

  When I first log on to windows xp if I'm not actively something minutes I logoff and must re-enter my ögon again. How can I change the length of time that it remains active?

  You can find in Control Panel

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.