Cannot create the data VMFS on SAN store

Similar Questions

• Cannot create the data store

  Hello!

  I installed ESX 3.5 update 4 with success, but I met following problem: I can not create the data store!

  Customer VI can't see my hard drive!

  Once the connection directly to the ESX Server using ssh, we see:

  # esxcfg-vmhbadevs

  #            # empty!!!

  # df h

  Size of filesystem used Avail use % mounted on

  / dev/hde2 3.5 G 1.4 G 2.0 G 41%.

  / dev/hde6 24% 19 M 61 M 84 M/Boot

  No 124M 124M 0 0% / dev/shm

  / dev/hde7 525M 20 M 479M 4% / var/log

  # vdf h

  Size of filesystem used Avail use % mounted on

  / dev/hde2 3.5 G 1.4 G 2.0 G 41%.

  / dev/hde6 24% 19 M 61 M 84 M/Boot

  No 124M 124M 0 0% / dev/shm

  / dev/hde7 525M 20 M 479M 4% / var/log

  devices/vmfs / 33M 33M 0 0% / vmfs/devices

  # fdisk-l

  Disk/dev/hdk: 200.0 GB, 200049647616 bytes

  255 heads, 63 sectors/track, 24321 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  FB/dev/hdk1 1 16709 134215011 unknown

  FB unknown/dev/hdk2 16710 24321 61143328 +.

  Disk/dev/hdi: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  /dev/hdi1 * 1 182401 1465135968 unknown fb +.

  Disk/dev/hdg: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  /dev/hdg1 * 1 182401 1465135968 unknown fb +.

  Disk/dev/hde: 500,1 GB, 500107862016 bytes

  255 heads, 63 sectors/track, 60801 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  / dev/hde1 1 96 763904 5 extended

  Partition 1 does not stop the cylinder limit.

  / dev/hde2 97 548 3630690 83 Linux

  FB/dev/hde3 618 60802 483425304 unknown

  / dev/HDE4 549 617 554242 82 Linux swap +.

  / dev/13 27 fc 112624 unknown hde5

  / dev/hde6 * 2 12 88326 83 Linux

  / dev/546178 95 28 hde7 83 Linux +.

  Partition table entries are not in the order of disc

  Disk/dev/hdc: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  / dev/hdc1 43932 182401 1112260275 7 HPFS/NTFS

  /dev/hdc2 * 1-11252-90381658 7 HPFS / NTFS +.

  unknown/dev/hdc3 11253 43931 262494061 FB +.

  Partition table entries are not in the order of disc

  #

  The partitions are present, but vmware won't do an analysis.

  Is there a way to understand what happened?

  My setup

  motherboard: Tyan Thunder n3600m S2932GRN

  disks: SATA seagate and WD.

  NIck

  I see the barebone specification and seem that your controller is a 'soft' RAID

  Take a look at the configuration of the SATA controller.

  When your drive will be recognized as/dev/sdXX, then you can create your data store.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Cannot create the data in vSphere 4.1 store

  Hi all

  I can't create a data store in my client vSphere 4.1.

  When I start to create the data store, I get this error, notice how it also says that disk is empty - it is also misrepresentation of the size of the 250 GB drive - should be 3.4 TB

  

  I can go beyond this by pressing return, and then click Next, but after that I entered a data store name, this error pops up:

  

  I don't know why this is, I've also tried it on several other client machines, all show the same errors - I join two error logs in the hope that someone will be able to shed some light on this.

  Thank you

  K

  As said, LUNs presented to the host need to be ESXi <= 2tb="" minus="" 512="" bytes="" in="" order="" to="" work="" as="" expected.="" for="" the="" reason="" of="" this="" limitation="" see=""> http://kb.vmware.com/kb/3371739

  Alternatively, you may consider upgrade to ESXi 5.0, supporting the LUN with up to 64 TB.

  André

• Cannot create the data source in console (Linux) wls XE db (windows)

  Hi all
  I use Linux5 for 11.1.1.1.4 soa deployments, I'm unable to create the data source in WLS of XE database that runs in win7, I'm getting below error.
  did I do it properly or it is not possible? When connecting with db XE which runs on Linux, I am able to connect.
  
  
  -Error connection failed test.
  -Error IO error: the network adapter could not establish the connection
  oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
  oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:670)
  oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:230)
  oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
  oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
  oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
  oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
  com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
  com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
  sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  java.lang.reflect.Method.invoke(Method.java:597)
  org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
  org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
  org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
  org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
  org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
  ...
  
  just please give me some resolution.
  
  Concerning
  Shankar

  I noticed that this is a problem with b & w of the VM communication. box of VM workstation vm.

  Thankx
  Siva

• Cannot create the data store: the current licence or ESXi version prohibited the execution of the requested operation.

  using vicfg-nas I am unable to create/remove a datastore nfs on my lab running esxi 6 at home. Is this not supported? Listing them works well. I can create/delete data warehouses nfs using the client to vcenter very well, but it's a little embarrassing.

  I guess that the host is allowed with the free edition of hypervisor! One of the few restrictions of the free version of hypervisor is access to the API. In order to have "write access" (i.e. change things rather than the list of them) you must run the host in evaluation mode, or license (Essentials or better).

  André

• Cannot create the data source to SQL Server

  Hi people,

  I am running IIS, Windows XP SP3, SQL Express 2005, Trial Version of ColdFusion 9 (no patches).

  The administrator using ColdFusion, when I try to create a data source for SQLExpress 2005 (SQL Server Express), by using the SQL Server driver, I get the following error:

  Connection verification failed for data source: AMT
  java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.
  The root cause was that: java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.

  The "instance", which I interpret as meaning the database instance, is "machinename\SQLExpress" (it is a so-called "named instance").  That's what I enter in the "Server" field of the display (data & Services-> sources-> Microsoft SQL Server).

  However, I am able to create an ODBC data source name in Windows using the driver Microsoft SQL Server Native Client Version 09.00.3042 and the same instance, "machinename\SQLExpress".

  Does anyone have any ideas as to what is wrong?

  Try to use the domain name TCP/IP (or IP address) and port instead of the info of the connectivity of Windows style.  You may need to enable TCP/IP as a network on the DB server protocol well (I think it is disabled by default on SQL Express Ed).

  --

  Adam

• HP ProLiant DL160 - cannot create the data with local storage (controller, no RAID) store

  Hi all. I appreciate your time and comments.

  Using VMware ESXi (initially), installation (VMware ESXi 5.5.0, 1331820) will very well (install on USB). Able to enter in the console of the vSphere Client, everything seems normal. Any attempt to use local storage, however, is filled with this error message: http://i.imgur.com/40ySsOS.png

  "It was not correct to specified parameters. Vim.Host.DiskPartitionInfo.spec"-" 'HostStorageSystem.ComputerDiskPartitionInfo' call for object 'storage system' on ESXi "< ip address >" failed. "

  I tried both the base (from VMware) installation disc and the "Custom" (HP) HP installation disk. Both have the same problem: all facilities, but local disks - as seen while - are not able to serve local storage. It worked very well (previous incarnation was as Server 2003 file server, no reported\noticed questions). It's not under warranty, its going to be used as a laboratory server. All this seems to work well.

  Specifics:

  HP DL160 G6

  Storage card: ICH10 6 Port SATA AHCI Controller

  Discs: 3 G MDL 500 GB 7200

  Controller and the disks are perceived by the system: http://i.imgur.com/3PAKQHL.png

  Can someone point me in the right direction on what to go here? Research on the error messages do not lead to a lot of help. I'll get more pending. I would be grateful.

  This could be a problem with the current data on the disk. I suggest clean you the partition info using the DD explained to the KB VMware: Troubleshooting in the add storage Wizard error: cannot read this disk partition information to see if that solves the problem.

  André

• Cannot create .vswp file to Virtual SAN: CPP to DOM returned Out of Memory

  Hey all,.

  In my virtual home existing SAN lab, I meet an interesting problem. When I try to turn some of my virtual machines now use the VSAN, vCenter present with the following error, even if the data store is online and running virtual machine workload. Restart the server vCenter (not on the virtual SAN) has no impact on the problem. I have also noticed I can't reconfigure the virtual machines as well and cannot vMotion; the operation times out. It's all the same problem.

  

  The VMkernel.log indicates the following interesting bit:

  (2014 05-07 T 10: 56:43.708Z cpu9:12823401) WARNING: VSAN: VsanIoctlCtrlNode:1624: 78-b9e8-c80aa988185c 65116 has 53-f9a2 - 5 c: CPP to DOM returned: out of memory

  (2014 05-07 T 10: 56:43.884Z cpu14:12823397) swapobj: SwapObjDumpVmklinkResponse:1236: {ID:0 x 211; type: CREATE; ret: {status: bad0001; open:{lock:s/volumes/vsan:52a52ed80c06c1b4-303a69b14df03e25/cecd3a53-7a99-b7c6-6b09-c80aa9881754/vCenterInstall-276e67a3.vswp;$}}

  (2014 05-07 T 10: 56:43.884Z cpu14:12823397) swapobj: SwapObjCreate:527: error returned by a call to vmklink: failure

  (2014 05-07 T 10: 56:43.884Z cpu14:12823397) WARNING: Swap: 3751: cannot create the file ' / vmfs/volumes/vsan:52a52ed80c06c1b4-303a69b14df03e25/cecd3a53-7a99-b7c6-6b09-c80aa9881754/vCenterInstall-276e67a3.vswp ': failure

  (2014 05-07 T 10: 56:43.884Z cpu14:12823397) WARNING: Swap: 12823400:4406 vm: Swap failed initialization failed

  (2014 05-07 T 10: 56:44.130Z cpu15:34773) World: 14296: VC opID spend 13 b 1 maps to vmkernel opID daeb8bcc

  (2014 05-07 T 10: 56:44.352Z cpu10:34297) Config: 346: "SIOControlFlag2" = 4, old value: 5, (State: 0x0)

  (2014 05-07 T 10: 57:00.003Z cpu1:34294) World: 14296: VC opID spend baa6 maps to vmkernel opID 49863fe9

  My next step was going to try to restart the hosts, but I wanted to see if anyone else experienced this or if there was a method to establish the first case before nuking the question, since, if it were production would take us actually a failure. All virtual machines running on the vsanDatastore are fine and all the capabilities of storage and tickboxes are green in the web client. I wonder if there may be a memory leak or something else. Uptime for these hosts is 55 days, running on the beta update VSAN. Thank you all!

  I restarted all hosts today and they all started right up. Will do the upgrade code of GA and see if the problem repeats. Thank you all!

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• VDP: Cannot access the data store

  Hello!

  I have a problem.

  Every day I see error for one of my servers in "reports":

  2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

  Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

  (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

  At the same time, I havn't this error for the other servers.

  "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

• Cannot create the VSA cluster: Cluster subnet is invalid. Should not be "network address".

  Hello world!  I had two questions on a configuration current VSA that I'm doing for a client.  Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines.     Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.

  1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.

  2. I received, during the vsa cluster configuration, the error message:

  Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0

  Now, I saw the article on what it could probably be.  The gateway appears and is correct.  The problem is that I know that the default gateway is not the ping requests.  I corrected it but have not begun installation because of the question #1 above.  Since the gateway is now who responded, what would be the possible resolution.  Thanks in advance to all those who support!

  Hey Nate,

  You're right about the behavior of the cluster wizard.  It does not consume space and leave the space used by the existing virtual machines.  Once that adjust you network settings (an adresse.0 may be the entry door?)  You should be able to proceed with the creation of cluster.

  IKE

• says device cannot create the folder

  have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB

  It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/

  Good luck, I know how much vacation photos can mean.

• Cannot create the backup on Vista computer

  back up files
  After working OK for 3 years, the backup system stopped send me monthly reminders to save about 4 months ago. Last month, I changed the settings to include the data drive (where I store files) and makes a full backup manually (which took 5 DVDs). This month I can't create a backup copy at all. Whenever I click on "Save files" it sends me through the box of 'continue' and then look back to where I started.

  I tried changing the settings to leave aside the data reader, but it makes no difference.

  Hello

  1. you are trying to backup the data on DVD again?
  2 have you installed a third-party backup software?

  Try these steps and see if it solves the problem:

  Step 1: Make sure that the backup services are started.

  a. Click Start, type services.msc, and then press ENTER.
  (b) in the services window, locate the Volume Shadow Copy service and Windows backup service.
  c. check that the status is started. If the condition column is empty,
  Right-click on the service and select start.
  d If you get error trying to force the Volume Shadow Copy service started, try to change the Startup Type to automatic and then restart the computer.

  Some files that are responsible for the backup would be damaged or missing. This could be a possible reason why backup does not work. You can run the file system
  scan of Auditor. Scan SFC will Windows replace corrupted or missing system files on your computer.

  Step 2: Scan Run SFC

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error barsigner: cannot create application data directory

  Hello, I got this error when I try to sing my application:

  error barsigner: cannot create application data directory

  I tried everything: as an administrator, change the directory security and so on.

  I get this error with the command line and from Flash Builder.

  I have v.0.9.1 SDK

  I have my application ready to be submitted, but cannot understand this error, I would be very disappointed to not meet the deadline of March 31 :-/

  Any clue? Thank you

  Really 0.9.1? could sign you your application with this version? have you tried the SDK 0.9.4?

• Error in retrieving the metadata of HFM. Cannot create the file

  In our HFM 11.1.2.3.503, we get an error when we try to extract metadata from any application of HFM. The States of error message failed to create the file.

  We are on hfm.501 but I tried with connecting to 503 to see if it solved the problem, but there was no solution in sight.

  Error code:

  {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}

  Summary of Message System

  Cannot create the file.

  Details of the Message System

  Error reference number: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}; User name: BI-DEMOS5$
  NUM: 0 x 80040230; Type: 1; DTime: 16/12/2015-21:27:04; SVR: BI-DEMOS5; File:; Line: 0; Worm:;

  There is no indication where he tries to put all the files so that I could try to find out if there is a setting somewhere pointing to a folder that does not exist or similar.

  Try the revision of the following document:

  • Hyperion Financial Management (HFM) error "unexpected error: 80040230 has occurred" trying to to Scan, load or extract meta-data (Doc ID 1282089.1)