Cannot create the debugging token

Similar Questions

• Cannot create the debugging token (.bar)

  Hello

  A few months ago I got xxx.csj - RDK-client and client-COMINCO - xxx.csj and registered with blackberry-signer. I used them to sign my applications published in the world of Blackberry. Some time later, I registered author.p12, barsigner.csk, and barsigner.db in a place course and then reinstalled my Windows OS.

  Today, I tried to create the debugging token. If I run:

  C:\bbndk-2.1.0\host\win32\x86\usr\bin\blackberry-signer-s'inscrire - csjpin - storepass xxxxxxxx xxxxxxx customer-RDK - xxxxxx.csj customer-COMINCO - xxxxx.csj

  I get an error:

  Cannot save client xxxxxxx because there is no more the record attempts. If you are already registered with this server, you must restore your backup signing keys. If you do not have a backup of the key, then you can order a new set of keys at www.blackberry.com/go/codesigning

  OK, I have my author.p12, the barsigner.csk and the barsigner.db, so I tried:

  C:\bbndk-2.1.0\host\win32\x86\usr\bin\blackberry-debugtokenrequest cskpass - xxxxxx - keystore author.p12 - storepass xxxxxxxx - deviceId xxxxxxx debugtoken.bar

  I get an error:

  Error: Not yet registered to request debugging tokens

  What's wrong? How can I generate a debugtoken (.bar file)?

  Oops! My mistake, I forgot to copy author.p12, barsigner.csk and barsigner.db to the default location:

  C:\Users\\AppData\Local\Research in motion

• Cannot create the debugging token / deploy Release - version signature of server problems?

  Since yesterday, Momentics IDE fails to create debugging tokens / binary deploy to exit with the error ' cannot sign bar: server is not responding.

  Is the signing server down? What is going on?

  The network connectivity problem is resolved.  If you had problems signing or debugging tokens created, please try again now.

• command line to create the debugging token has problem with the bbidtoken

  Hello

  I tried to use the BB ID token to create the debugging token.  Following the instructions of the command line, I got an error.

  BlackBerry-debugtokenrequest - bbidtoken bbidtoken.csk - storepass mypassword deviceid - 12345678 dt.bar

  Error: Only RDK or COMINCO Signatures are allowed when using BBIDToken

  The token id BB must be correct, because I can use it to sign an application.  I can also generate the debugging token from Momentics.  I believe momentics also call blackberry-debugtokenrequest internally, but do not know what are his secret settings.

  Thanks in advance for any help.

  Tyler

  Try without the parameter of bbidtoken.csk - bbidtoken.

  Also, make sure you use blackberry-debugtokenrequest of the 10.2 Gold SDK.  Previous versions do not BlackBerry ID support chips.

• Where the IDE does not store the debugging token?

  I try to use a different method to compile applications but I'd like to avoid re-creating the debugging token

  When you go to the "signature" tab (preferences-> OS BlackBerry Tabel-> signature), the token path debugging is listed for her.

• Creating a debug token issues

  Hi guys,.

  I have problems of tokenization of debugging and I was hoping someone could help me! I am creating the token of the command line. When I used the following line to register for the SJC it reports "barsigner error: already registered with RDK.

  blackberry-debugtokenrequest -register -cskpass 
      -csjpin  
  

  I have not registered before, but I thought that I would try to create the debugging token using the following line, but it brings only ' debugtokenrequest error: not yet registered to request debugging tokens.

  blackberry-debugtokenrequest -cskpass  -keystore <.p12 file>
      -storepass  -deviceId 0x
      -deviceId 0x -deviceId 0x 
  

  So I'm stuck! I can't do. Can anyone help?

  See you soon,.

  Mark

  Using the LSB of the second email file? If you have registered for the original file of the CSJ to sign with RIM, you should have received a secondary e-mail blackberry under the heading "Blackberry Tablet OS Debug Token" with a new LSB file. The prefix of this file is 'customer-COMINCO.
  in summer, do not use the original LSB file used to sign your application with the rim.

  I have a full guide on setting this up here:

  http://www.mellisdesigns.com/blog/?p=37

  concerning

  Mitch

• Cannot install the debugging for bb10 token: error in tag hr

  After having successfully generated a debugging token, jcdebug.bar, I tried to install it using blackberry - deploy and got a fatal system error.  My entry of order/.output line is below.  What am I doing wrong now?

  Token of debugging C:\Users\Jacquelyn\Documents\Jacquie\Blackberry\bb10 > "C:\Program Fil".

  are (x 86) \Research in Motion\BlackBerry 10 SDK WebWorks 1.0.4.7\dependencies\tool

  s\bin\blackberry - deploy"installDebugToken - jcdebug.bar - 192.168.1.10/24 device

  -password mypassword

  [Fatal error]: 5:3: the element type "hr" must end with the corresponding end

  -tag «»

  Error: Authentication failed due to system error

  DOH!  I forgot to put my (dev alpha B) device in development mode.  Also used the IP address specified for the development.

  Fixed a problem.

  Now we'll see if I can put the debug token...

• Can't remember how to create a debug token

  In previous versions of the SDK, I didn't hurt to make it past the stage of creating a debugging token, but for 10.0.9 I am stuck.

  A dialog box appears allowing me to select my developer certificate, what I do, but it's also requires me to fill:

  Path of the CSJ RDK

  Path of the COMINCO CSJ

  CSJ pine

  Password: CSK

  Previously I remember only having to enter the password of the CSK.

  Anyone know what is happening?

  I had to go to:

  Window-> Preferences

  BlackBerry

  Signature

  Clicked: The deployment of the BlackBerry installation wizard

  etc.

• Download the Debug token error

  I try to install the token of debugging on my device. I've added as a Test device with the password WiFi IP address and device. I also created a debugging token. When I try to download to the device (when the appliance is in Mode Token Upload), it takes a long time and I get an error indicating that the download failed - connection refused.

  I checked the symbolic debug information and everything seems fine. I also tried to download the token via command line, but I still get connection failed.

  Any ideas?

  Nevermind, after three days of troubleshooting, I was able to install it. It was just a problem of network.

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• says device cannot create the folder

  have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB

  It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/

  Good luck, I know how much vacation photos can mean.

• Cannot create the folder on the storage device

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  =====================================
  The dialog box you received usually indicates that there
  are too many files copied to the root directory of the
  flash drive.

  The solution is to remove one or more pictures and
  create new empty folders in their place... then move
  all the photos in the files... problem solved.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!