Cannot create the VPN with partner

Similar Questions

• HP ProLiant DL160 - cannot create the data with local storage (controller, no RAID) store

  Hi all. I appreciate your time and comments.

  Using VMware ESXi (initially), installation (VMware ESXi 5.5.0, 1331820) will very well (install on USB). Able to enter in the console of the vSphere Client, everything seems normal. Any attempt to use local storage, however, is filled with this error message: http://i.imgur.com/40ySsOS.png

  "It was not correct to specified parameters. Vim.Host.DiskPartitionInfo.spec"-" 'HostStorageSystem.ComputerDiskPartitionInfo' call for object 'storage system' on ESXi "< ip address >" failed. "

  I tried both the base (from VMware) installation disc and the "Custom" (HP) HP installation disk. Both have the same problem: all facilities, but local disks - as seen while - are not able to serve local storage. It worked very well (previous incarnation was as Server 2003 file server, no reported\noticed questions). It's not under warranty, its going to be used as a laboratory server. All this seems to work well.

  Specifics:

  HP DL160 G6

  Storage card: ICH10 6 Port SATA AHCI Controller

  Discs: 3 G MDL 500 GB 7200

  Controller and the disks are perceived by the system: http://i.imgur.com/3PAKQHL.png

  Can someone point me in the right direction on what to go here? Research on the error messages do not lead to a lot of help. I'll get more pending. I would be grateful.

  This could be a problem with the current data on the disk. I suggest clean you the partition info using the DD explained to the KB VMware: Troubleshooting in the add storage Wizard error: cannot read this disk partition information to see if that solves the problem.

  André

• Cannot create the file with EclipsePlugin .cod

  Hello

  I don't know how to describe it. I installed Eclipse plugin, JDE 4.5.0_4.5.0.16 and then updated to JDE plugin 4.7.0_4.7.0.46 (because I need the latest JDE packages so I can use ApplicationIndicator).

  But now when I'm trying to compile or create a .cod file (Eclipse: Project / Build active Configuration of BlackBerry) I get this error message:

  Executing rapc for the project BirthdayReminder at Mon Jun 08 09:28:07 CEST 2009.
  C:\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\launcher.exe C:\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\rapc.exe  -quiet import=..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar;..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\lib\net_rim_api.jar codename=..\BirthdayReminder\BirthdayReminder ..\BirthdayReminder\BirthdayReminder.rapc -sourceroot="C:\Dokumente und Einstellungen\xxx\workspace\BirthdayReminder\src" "C:\Dokumente und Einstellungen\xxx\workspace\BirthdayReminder\bin"
  ..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\lib\net_rim_api.jar(net_rim_bb_addressbook.cod): Error!: Duplicate definition for 'net.rim.device.apps.api.addressbook.AddToAddressBookContext' found in: ..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar(net_rim_bb_addressbook.cod)
  rapc failed for the project BirthdayReminder
  

  I don't know how to fix this... Why are there at - it a method definition duplated in the container of the RIM?

  I'm sorry - I solved it this problem for me.

  After update eclipse to 4.7.0.46, you need to uninstall the 4.5.0.16 package caraa. After a restart of eclipse, the new 4.7.0.46 package will be selected for the compilation and no error will be thrown.

  

• Cannot create the p12 certificate with existing certificate of distribution

  Hello

  I published apps before using my employers apple developer account that is simple enough forward if you follow the instructions. Asked me to create an application for distribution with the apple store using the developer account. I need to create the final application .zip and pass it to the customer who shall submit the actual application is.

  My problem is that I can't create a p12 certificate to attach to the DPS App Builder app. The customer has three certificates of distribution in their account, but had third party create them on their behalf. To my knowledge, the best way to handle this would be to revoke old certificates three distribution in their apple developer account and create a new linked to my machine that would allow me to create all the necessary certificates. It seems that 3 certificates of distribution is the limit they may have at any given time.

  My questions are:

  1. is my solution, right?

  2. If so, revoke a certificate of distribution would cause problems for one of their other applications that are published or in progress?

  The only other option that I could see was the creator of one of the certificates in distribution create a p12 certificate that I relate to the DPS App Builder app.

  Any help, advice or pointing me in the right direction would be greatly appreciated. I've never had a problem of edition following the directions, so it is a new issue for me.

  Kind regards

  C

  If you have access to your Apple dev account, you can create certificates on your machine, but if they have existing certificates in their account, could cause confusion and don't want to mess with their existing certificates.

  You advise to ask your client to create and pass the CERT, create the app with their certificates and pass back the zip for them to download

• What does that say "automation server can't create the object" with undefined is null or not an object

  I get these pop ups on an application I have to access it through a company VPN

  Hello charliedoodle,

  Given that the application tries to reach a Web site through the VPN to your business, you should check with your integrated personnel.
  They may have a problem on the server, or may have set a new strategy group. We would not be able to help with this issue.

  However, you can watch the following article which addresses the error message you receive.
  Click the number of the KB article to revise article.
  KB Article ID: 323885 -error message in Visual Studio: "Automation server cannot create the object.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Error in retrieving the metadata of HFM. Cannot create the file

  In our HFM 11.1.2.3.503, we get an error when we try to extract metadata from any application of HFM. The States of error message failed to create the file.

  We are on hfm.501 but I tried with connecting to 503 to see if it solved the problem, but there was no solution in sight.

  Error code:

  {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}

  Summary of Message System

  Cannot create the file.

  Details of the Message System

  Error reference number: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}; User name: BI-DEMOS5$
  NUM: 0 x 80040230; Type: 1; DTime: 16/12/2015-21:27:04; SVR: BI-DEMOS5; File:; Line: 0; Worm:;

  There is no indication where he tries to put all the files so that I could try to find out if there is a setting somewhere pointing to a folder that does not exist or similar.

  Try the revision of the following document:

  • Hyperion Financial Management (HFM) error "unexpected error: 80040230 has occurred" trying to to Scan, load or extract meta-data (Doc ID 1282089.1)

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• 11.1.2.3 EPM environment - cannot create the sample HFM application.

  Hi Experts,

  I have a particular question of HFM on newly built EMP 11.1.2.3 environment - cannot create the sample HFM application.

  HFM: 11.1.2.3.100

  OS: Windows Server 2008 R2 Enterprise Server 64-bit

  I get "Unspecified error", when you create a sample Application using the workspace.

  HFM. ODL.log:

  [2014 02-09 T 21:35:15 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHFMCASSecurity.cpp] [line: 546] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: the system cannot find the specified path.]
  ] [paramString:] unspecified error

  [2014 02-09 T 21: 35:16 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHsxServerImpl.cpp] [line: 4890] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: STAT] [paramString: admin@Native Directory;] Unspecified error

  Viewer application event log:

  Log name: Application
  Source: Hyperion Financial Management
  Date: 09/02/2014-15:35:16
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: AD1\! fdminstall_abc
  Computer: auhodtest.oracle.com
  Description:
  Error 11;! fdminstall_abc; 09/02/2014-15:35:16; CHFMCASSecurity.cpp; Line 546; <? XML version = "1.0"? >
  < C'estr > < Ref > {92DCCDF8-B8C1-4F61-B858-BDADFAE401B0} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147467259 < / Num > < Type > 1 < / Type > < DTime > 09/02/2014-15:35:15 < / DTime > < Svr > auhodtest < / Svr > < file > CHFMCASSecurity.cpp < / file > < line > 546 < / line > < worm > 11.1.2.3.100.4261 < / worm > < ExErr > the system cannot find the path specified.
  < / ExErr > < / CSEC > < / C'estr >

  Could someone please suggest me some tips on this problem of creating application - HFM?

  Thank you

  KK

  Sharing the fix in response to the post here:

  The 'Unknown error' error was due to the fact that underlying configuration of HFM with Foundation was broken and so HFM complained of another error, "the system cannot find the path specified".

  Then as an effort to solve the problem, in a scenario where I had to uninstall, reinstall and re-config component HFM which solved the problem.

  Thank you

  KK

• Error Lightroom: You cannot create the required folder

  Hello

  I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:

  There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.

  

  Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.

  Can someone help me? Please

  Hi viviang,

  Greetings!

  There is a permission problem.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required folder.

  I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required file"Please help me. I tried various solutions on the web. None of this has worked.

  Please run repair permissions from disk with disk - Apple Support utility

  ~Assani