Cannot delete Avast Antivirus, not all files are deleted in XP

Similar Questions

• I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please advise__

  I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify

  Please see: How to replace the lack of software Microsoft Carey Frisch

• Open dialog box appears only not all files

  I just bought a new iMac (Yosemite 10.10.5 running version) and I have a problem with Illustrator (race 2015.1.0) when I try to 'open' or 'save' a document all my files in any folder are not displayed.  No matter how big or small the dialog box is that all files are more fit in this box.  It's a little hard to explain so I enclose a photo.  There are dozens of additional files that should be showing in this area.  On the right side of the box, you can see how file names are cut off.  There is more to the right of that.  I'm not able to reproduce the problem in photoshop or any other program on my computer so I figure it's a framework or a problem in illustrator.  Anyone can shed some light on this?

  I do not wish to use the column view that I need preview buttons.

  

  ammyzan,

  If you use the column view, run away until Apple has resolved the issues.

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  If this isn't the case, it may be best to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• Not all patterns are presented in the Application in MISP schemas

  Hello

  I try to use MISP (Database Migration Unicode Assistant) to assess potential problems for a conversion NLS_CHARACTER_SET and note that not all schemas are indicated in Application schemas folder in the Navigator Panel. Especially I want to scan.

  In my case, it's showing only 4 patterns when there is almost more than 10 + in the database.

  Everyone got to experience that too? Could not find anything on MISP known issues?

  Thank you

  Eduardo.

  Have you checked if the missing patterns have all columns of type VARCHAR2, CHAR, CLOB, or LONG?

  Thank you

  Sergiusz

• CRS-5020: not all settings are saved for earphone HEADPHONE

  Hi all
  
  I use Oracle RAC 11 g R2 on AIX 7.1
  
  I am facing a CRS-5020: not all settings are saved for earphone HEADPHONE
  
  When I run crsctl res stat - you
  I got the output below:
  

  ora.LISTENER.lsnr
                 ONLINE  INTERMEDIATE rac_1     Not All Endpoints Registered
                 ONLINE  ONLINE       rac_2

  and then:
  
  Ora crsctl State resource. LISTENER.lsnr

  NAME=ora.LISTENER.lsnr
  TYPE=ora.listener.type
  TARGET=ONLINE                              , ONLINE
  STATE=INTERMEDIATE on rac_1, ONLINE on rac_2

  Then I tried to stop and start this receiver but still facing the same problem
  

  crsctl stop resource ora.LISTENER.lsnr
  
  CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'rac_2'
  CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'rac_1'
  CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'rac_1' succeeded
  CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'rac_2' succeeded
  
  crsctl start resource ora.LISTENER.lsnr
  
  CRS-2672: Attempting to start 'ora.LISTENER.lsnr' on 'rac_2'
  CRS-2672: Attempting to start 'ora.LISTENER.lsnr' on 'rac_1'
  CRS-2676: Start of 'ora.LISTENER.lsnr' on 'rac_2' succeeded
  CRS-5020: Not all endpoints are registered for listener LISTENER
  CRS-2676: Start of 'ora.LISTENER.lsnr' on 'rac_1' succeeded

  Here are a few listener.log balls where I have this error: TNS-12505: TNS:listener is not currently of SID given in connect descriptor
  
  

  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  03-NOV-2012 11:49:03 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=RAC_2)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647296)
  ) * status * 0
  03-NOV-2012 11:49:04 * version * 0
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.130.67.21)(PORT=1521)))
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.130.67.25)(PORT=1521)))
  03-NOV-2012 11:49:04 * service_register * LsnrAgt * 0
  03-NOV-2012 11:49:05 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=RAC_2)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647296)
  ) * status * 0
  03-NOV-2012 11:49:07 * (CONNECT_DATA=(SID=PREPROD2)(CID=(PROGRAM=perl)(HOST=RAC_2)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.130.67.21)(
  PORT=41912)) * establish * PREPROD2 * 12505
  TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
  Sat Nov 03 11:49:21 2012
  03-NOV-2012 11:49:21 * ping * 0
  03-NOV-2012 11:49:22 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=RAC_2)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=18664729
  6)) * status * 0

  What can I do to fix this?
  
  Kind regards

  Hi NB,.

  Have you tried to note "Listener in INTERMEDIARY status with' not all the endpoints registered" [1454439.1 ID] "?

  See you soon

• Interactive report - strange not all columns are showing?

  Hello
  
  Something weird is happening with my interactive report, not all columns are displayed, and I have no idea why this is happening?
  
  In my column attributes, they are set to display as text, but only some of the columns are presented
  
  Another weird issue is the search bar is also not appear, and it is set to show?
  
  Any ideas on how to solve this problem, in particular the first issue with columns
  
  Thank you very much

  If you changed your IR source and added columns, then you must add columns in the menu actions IR indeed. Of course, the columns have to 'See' active in their attributes.
  If you don't see the search bar, check the IR options. Ditto for the menu actions. If both are true, make sure there is no dynamic action masking the region holding the IR tools.

• ORA-01008 that not all variables are related

  Hi I have a question for follwing procedure

  DECLARE 
  V_ERR_CODE VARCHAR2(1);
  V_ERR_DESC VARCHAR2(250);
  V_CC_NO VARCHAR2(20);
  STR VARCHAR2(4000);
  CURSOR C1 IS
     SELECT *  FROM TABLE_S;
  
  C1_REC C1%ROWTYPE;
  
  BEGIN
  STR := 'INSERT INTO P_1(A,B,C) VALUES(c1_rec.cc_no, :V_ERR_CODE, :V_ERR_DESC)';
  FOR C1_REC IN C1
  LOOP
  IF CHKSTR_CHG_PRIV_IND_VAL(C1_REC.C1) = 1 THEN
  V_ERR_CODE := 'O';
  V_ERR_DESC := 'CHARGING  NOT IN Y,N';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_NULL_VAL (C1_REC.c2) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'OPEN DATE  IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_NULL_VAL (C1_REC.SSN) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'SOCIAL SECURITY NUMBER IS NULL';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NULL_VAL (C1_REC.FIRST_NAME) = 1 THEN
  V_ERR_CODE := 'O';
  V_ERR_DESC := 'FIRST NAME IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_NULL_VAL (C1_REC.SURNAME) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'LAST NAME IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_LOST(C1_REC.c3) = 1 THEN
  V_ERR_CODE := 'O';
  V_ERR_DESC := 'LOST  IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NULL_VAL (C1_REC.DOB) = 1 THEN
  V_ERR_CODE := 'O';
  V_ERR_DESC := 'DATE OF BRITH IS NULL';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  
  IF CHKSTR_CC_NO_LENGTH (C1_REC.CC_NO) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'CREDIT CARD LENGTH IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_NUMERIC_VAL  (C1_REC.CC_NO) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'CREDIT CARD IS NON NUMERIC';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMERIC_VAL  (C1_REC.SSN) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'SOCIAL SECURITY NUMBER IS NON NUMERIC';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_SSN_LENGTH (C1_REC.SSN) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'SOCIAL SECURITY NUMBER LENGTH IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_CC_NO_VAL(C1_REC.CC_NO) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'CREDIT CARD <> 4264 AND <> 4313';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_DATE(C1_REC.DOB) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'DATE OF BIRTH IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_DATE(C1_REC.OPEN_DATE) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'OPEN DATE (ISSUE DATE) IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  
  IF CHKSTR_DATE(C1_REC.c4) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' CHANGE DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_DATE(C1_REC.c5) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'CODE CHANGE DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_DATE(C1_REC.c6) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'REISSUE DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_DATE(C1_REC.dDATE) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' PAYMENT DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_DATE(C1_REC.DATE) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'LAST ACTIVITY DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_DATE(C1_REC.c7) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' PAYMENT DUE DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_DATE(C1_REC.c8) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'CONVERSION DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_DATE(C1_REC.c9) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'TRANSFER DATE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.LIMIT) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' LIMIT IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  
  IF CHKSTR_NUMBER (C1_REC.TOTAL) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'TRANSACTION TOTAL  IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.c10) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'c10 TOTAL IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.c11) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'c11 TRANSACTION IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.c12) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'c12 TRANSACTION IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.c13) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'c13 TOTAL IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.AMT) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' AMOUNT IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.BALANCE) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := ' BALANCE IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.CARDS) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'NUMBER OF CARDS IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  
  IF CHKSTR_NUMBER (C1_REC.c14_CARDS) = 1 THEN
  V_ERR_CODE := 'M';
  V_ERR_DESC := 'c_14 NUMBER OF CARDS  IS WRONG';
  EXECUTE IMMEDIATE STR;
  END IF;
  COMMIT;
  END LOOP;
  END;

  I get following error when I try to run
  ORA-01008 that not all variables are related
  Table (p)
  a varchar (20),
  b varchar (1).
  c varchar2 (250))
  
  also there are 50 columns to 3 not only inserted but the column values for the other will be the same for all conditions. then to test, I added only 3 columns.
  
  Please help me how can I solve this problem...
  Thank you very much
  
  Published by: user10647455 on January 14, 2009 14:04

  Change your code to:
  ...
  EXECUTE IMMEDIATE STR WITH THE HELP OF V_ERR_CODE, V_ERR_DESC;
  ...

  Explanation:
  Dynamic SQL bind variables using variable names.
  in your case
  STR: = "INSERT INTO P_1 (A, B, C) VALUES (c1_rec.cc_no,: V_ERR_CODE,: V_ERR_DESC)";
  does not say that the variables: V_ERR_CODE,: V_ERR_DESC are automatically linked.
  In dynamic SQL variable binding is done using the syntax 'USE '.

  Look at:
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/dynamic.htm#LNPLS01102

  HTH
  Thomas

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Finder shows do not all files after upgrade to El Capitan

  I've recently upgraded the OS on my iMac to Snow Leopard to El Capitan version 10.11.4.

  Since the upgrade Finder shows all records.

  I used to have a folder called 'Music', containing a large number of MP3 and WMA files, I had transferred my collection of CD so I could listen to them on my Sonos system. These files are still there, I can see them in "My files", but the record they were in shows no more, so the Sonos software cannot find them.

  Finder displays 'Favorites', but not records such as users (understand me and the under 'Music' folder) no longer appear.

  If I right click on a music file and select 'get info', I see that the old structure of the file is still there, but the Finder does not systematically.

  How can I make Finder show all folders on the hard drive?

  System information:

  iMac (21.5 inch, late 2009)

  3.06 GHz Intel Core 2 Duo processor

  4 GB 1067 MHz DDR3 memory

  Boot hard drive Macintosh disk

  NVIDIA GeForce 9400 256 MB graphics card

  Open Finder > Preferences and click on the button of the sidebar. Add checks for folders and drives that you want to appear on the sidebar of the Finder.

• Windows XP, you see only not all files in Windows 7 shares

  I see an embarrassing problem that occur on two different sets of machines on different networks.  The initial symptom that led me to study was that software synchronization third laptop XP Pro SP3 computer a user has acted improperly, saying that some files in directories on a Windows 7 Ultimate 32 bit computer were gone, but they really were.

  I traced the problem in several directories on the Windows 7 machine display incomplete content seen on the XP machine network.

  For purposes of explanation, //Desktop/Folder is a share on the Windows 7 computer, which has 167 files it contains.  If you open this share on a networked XP Pro computer, it shows only 140 files.

  For example, File1.doc and File2.doc are both in this shared directory on the Windows 7 computer.  However, on the XP machine, File1 does not appear in the directory.

  On the Windows 7 machine, File1.doc and File2.doc are identical regarding permissions and attributes.  The only differences are the size and creation date.  Look at the rest of the 27 "missing" files in this folder, the results are the same - I see no difference.  The files are not password-protected.

  I have reproduced this exact behavior with the same data on different machines with the same operating systems.  All machines are completely up to date with respect to updates.  There is no detected malware on any of them.  They are on the same workgroup.

  This change in behavior has happened apparently quite recently that the user had no problem with the synchronization software for laptop until last week.

  Can anyone suggest what could happen here?

  Thanks for your reply, Jonathan.

  I traced the problem to Avast (any flavor).  It turns out that it's a known problem, but not a single notice of too many people.  It is really so when you try to run the software of synchronization between two networked computers and directories that you synchronize are affected by the bug of Avast as the synchronization software performs a very detailed comparison.

  When I uninstalled Avast on the source (Windows 7) XP machine could see all the files in all the network shares.  When I reinstalled Avast, the problem returns.

  I have a ticket in Avast on this problem.

• I update my 2014 Photoshop Photoshop 2015 CC CC and not all scripts are

  I'm updating Photoshop 2015 CC and not all default scripts are loading missing scripts, I use layers in all my projects and it doesn't download (and more).
  I use the Browse button congratulate to run the script, but it is very uncomfortable to do whenever I need. The funny thing is that load my custom Web scripts.

  
  Someone has an idea how solve it?

  I know it's the new update, but there are a lot of bugs that I read and the bugs I staff meeting.
  I hope that Adobe will soon release an update to the fixed a bug because Photoshop 2014 cc worked for me as if by magic.

  Eli.

  Have you looked under file > export in photoshop cc 2015?

  

• not all photos are in icloud

  I have Photos app on my mac and in Photos preferences > iCloud, iCloud library is checked

  It took a lot of time for loading to complete, but now that she's apparently completed it turns out that the photos/videos by 2010 have not uploaded to icloud. I see this going on icloud.com and look at pictures.

  The total size of my library of Photos (local storage) is about 125 GB but only about 89 GB of photos/videos are indicated in icloud storage (I paid for the storage of 200 GB and there are about 100GB still available).

  I'm stuck because icloud in the Photos App believes that it has completed the work, but he clearly didn't.

  Any ideas?

  Thank you

  Paul

  Check if there are photos that can not download on iCloud photo library.

  You can use a smart album with these constraints:

  

  It will find all elements that have a format incompatible and all referenced photos or videos.  Not all image formatscan be used with iCloud and referenced photos can also not be uploaded to iCloud photo library.

• tried to download on xbox live profile but it won't download and all files are currupt

  in late October, I downloaded my live profile xbox on my new xbox it was working fine until yesterday June 1, 2012, I tried to download it again today, but it came with "xbox live fails to download profiles please try again later", but now all my files are currupt and I lost all the progress of game on this profile. what you can do to help please

  Thank you for your help

  Hello

  Looks like you need XBox support and forums.

  Answers has no influence on the XBox or XBox Live If you need to contact them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After an unexpected program has been installed on the XP system, now all files are hidden

  I had a problem with a program on my system without my knowing who said I had all sorts of problems of security etc, but would have to buy the program for hotfixes take place, I had to do a closed down tough because he I was not allowed to use anything on the computer. I then made a start in safe mode and then restored a system. Once it restarts again all files in my documents where ghosts and said attributes when hidden. I could see the graphics in the file if I put the file to film but to share by clicking on each of them they were ghosts. I couldn't open any JPEG files only visualize in Filmstrip mode. Could someone tell me how to solve this problem

  * original title - my documents folder problems *.

  It appears the problem with viruses. Check with your security software