Cannot delete the file because its not located in the destination of file over any help?

Similar Questions

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• Cannot delete the file. 'trial' "impossible to find this element". It is neither located in C:\Users\master\desktop.

  I have a folder called test on my desk that I created to try the xcopy commands.  Anyone who has nothing to do with it.  I think that when I created the folder I could add a space somewhere in the file name.  He is currently empty that I deleted a word of her documents.

  However I can't remove it.   It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop.  Have already tried to delete the file in safe mode but not no luck.  Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files.  If I right click a properties to create the size is 0bytes and created a modification dates are suppressed.  How can I delete the file?

  
  

  '\\?\%userprofile%\desktop\trial*' of RD/s
  '\\?\%Public%\desktop\trial*' of RD/s
   
  Note the * appended to the name.
  --
  ..
  --
  "J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...
  > Ok, I tried both commands and came to the same thing.
  >
  > Other ideas please?
  >
   

• Cannot delete a file in windows 7. Indicates the specified file name is not valid or too long.

  Hello everyone, I'm pretty stuck here. I can't delete a file in windows 7 or any other do with it besides. Says "the specified file name is not valid or too long. It has a funny name [~ t] and no extension. The file type, say "file". The properties are all screwed looking with a mistake on the Security tab, a size of 0 k, is a Windows (c) \Windows\en-US.The other files in this folder appear normal. The computer seems to work very well without any obvious problems. The only problem is my anti-virus reports with a kind of syntax for the file error and indicates it cannot parse this file. I do not. I can't do a thing with it either. Cannot open, rename, move, delete, change passwords, properties, permissions, nothing. It may be necessary for a good part with 0kb. According to me, I want to just delete the thing. Please, anyone? Thanks in advance.

  Hey bud, I figured out how fix it earlier. I am so happy. I came to remember a command called chkdsk which worked very well for various issues, that I had since the construction of my old 2000 Professional machine. I think that one was my first NTFS system. I always liked how well he error correction. Seemed a lot better than the old scandisk. Low and behold, I tried and star ANISE, it is went through it, found this file almost from the beginning of the analysis and a few lines later, he said has been removed. Says something about the file being orphaned some time ago. It was a very bad child, that I tell you. I ran it in safe mode command prompt. I guess he would have done the same thing in the normal windows well, but I happened to be in safemode, when it came to me. I used the switch /f with her. Since the C:\ command prompt or any drive letter your operating system is selected, type CHKDSK/F if I remember although the f was to have it automatically CORRECT errors. I hope this info helps others with their file or disk problems. It seems that many people say they get mistakes and cannot delete various files here in these forums. Thanks Sandeep for answering me and try to help. It does not matter whether or not it was the fix, it takes time to post and your helping people learn to be it. The only thing that remains unanswered for me is actually the thing of the answer. I mean I can't say someone at - it really answered my question and do not count me? Maybe I should mark so that people will bother to read it and get the fix. HMMMM... I come back here some time later and see whats up.  SeeYou, EWOO

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• Extractdion failed, cannot delete the output file

  I have Windows Pro 8, 64-bit, 8G of RAM.

  When you try to install the drivers of HP, I get the following error.  Extraction failed, cannot delete the output file.  I get the same error using the download I used to use with Win 7 and a new download from the HP Web site.  I have also tried to run the program as an adminitratior and get the same error message.

  I managed to do the work.  I found on my C drive the location of the files when extracted and run the installation program from there.

• CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE

  Try to patch effect for Deskjet 722C for Windows 7.  Not able to replace the existing .dll files.  Error messages: could not open the output file, cannot delete the output file.

  Thank you for your response.  I found these solutions but still had problems.

  However, I was able to bypass Windows with a DOS command that did the trick.

  C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3

• Cannot delete a file 'empty '.

  I recently downloaded a file and thought I had deleted. However, I managed to create a 0 byte file that appears on my desktop, appears in the file dir / x of order invites and still cannot be moved, renamed, or deleted. Windows reports, "failed to find this article. It is no longer in... ».

  My problem is similar to the "cannot delete illustrates file listed in the file Explorer Vista - does not exist?" thread. I tried several of the steps used in this situation, as the use of a third party file removal tool (KillBox) and also get into the command prompt and try Rd (filename) to remove. I also tried to use e/s (filename), but he kept reporting that "the directory name is incorrect.

  This file is also not protected, and I am logged on as administrator. Any thoughts?

  Hello MrMichael,

  Thank you for using Microsoft Vista answers Forum!

  Try to start your PC in safe mode by following the steps below and see if you can delete that folder/file from there.

  How to start in safe MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Cannot delete the application role - error OBIEE main

  I tried to fix my personal account of OBIEE today and tried to remove me an applicaation role in enterprise manager and received the following error

  Cannot delete the main application role; main < user name > is not a member of the application role < role >

  Has anyone seen this error?

  My user id also seems to be capitalized - ex userid: Userid rather than what I expect it to be in all the tiny userid

  Hi Christian

  You are right that I am on 11.1.1.7.140225

  I was able to fix this very weird error in fact goes here/home/itadm/u01/obiee/user_projects/domains/bifoundation_domain/config/fmwconfig

  Open the file system-jazn - data .xml

  And by removing the additional entry manually

  So I deleted the following

  weblogic.security.principal.WLSUserImpl rodneyc

  Then when I went back to EM the user had gone as planned. I'm guessing that something screwed up in this file, but all right

  Thank you for the help

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.

• partition 'Windows cannot delete the active system partition on this disk.

  I created a partition of HARD drive in order to install a system in multiboot using XP and Vista, but I did mess up the BONES of the two. Now I want to do a clean install of Vista ONLY, but I don't know how to get rid of the partition! * Example: Computer management > disk management > right-click on the volume (M) > Delete Volume * but I get an error: "Windows cannot delete the active system partition on this disk" can someone help me to get my Vista to original?

  P.S. I have the "Microsoft Windows Vista Home Premium32 - bit Operating System Disk" provided with my computer when I bought it new. Thank you! -Jeff

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  Delete the existing Partitions during the process.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  See you soon.

  Mick Murphy - Microsoft partner

• Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device

  HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
  Any help will be greatly appreciated.

  Hello

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If the problem persists, I will be asked to contact the hardware manufacturer for assistance:

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?cc=us&lang=en&prodSeriesId=410622&prodTypeId=18972

  Hope the above information is helpful.

• You cannot delete the pattern used to the absence of an employee

  We are on 11.5.10, there is one issued due to the Absence. Suggest, we created type absence as "Time off" and attached reason which is mentioned below. After a while, we decided to remove the specific reason so that this employee cannot select this reason while submitting to authorization through self-service. Although we have disabled that always shows the reason for the "ABSENCE_REASON" research but employee self-service creates leave.
  
  "However, when I try to remove holiday because of the type of absence as mentioned above, then system will trigger the message" error MESSAGE: "you cannot delete the pattern used to the absence of an employee.
  
  Reason
  1 accident
  Appointment 2.doctor
  3. others
  
  How can we remove the 2nd reason (doctor appointment) to the list even if it has already been used in absence transactions.
  
  Thank you.

  Have you tried to value in the research of reason for the absence of end date?

  Also clear the Cache before testing...