Cannot depend on automatic updates

Similar Questions

• cannot activate the automatic updates on my laptop.

  original title: cannot activate the automatic updates on my laptop.  Were follwoed instructions Update window without success.  Help!

  Automatic message updates consistent warning box are not on.  Tried several times to move away, but still says that the site has encountered a problem.  Now completely blocked

  Hello

  -Did you change on your computer before the show?
  -Did you have performed the steps described in this article?
  -What Service Pack is installed on your Windows XP computer?
  -Have you tried "fix it" of this article?

  I suggest you to test the issue in a new user account.

• Cannot open the automatic updates on windows xp 800704424 error page

  Unable to open error 80070424 automatic updates page

  Hi Annraftery,

   

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems that you are unable to run automatic updates with error code 80070424.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  I suggest you follow the steps in the link below and check off the question:

   

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall:

  http://support.Microsoft.com/kb/968002

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Cannot access Windows Automatic Update after fixing error "generic host for Win32 process.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:

  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module is not found.

  Please help me to get the automatic updates to run.  Thank you!

  Go to OPTION B (or, preferably, OPTION C).

• Cannot turn off automatic updates and the Error Message on Loadup and Peridoically subsequently

  The following error message appears when the computer starts up, when I click on "check for updates", when I try to turn off the automatic updates in the preferences and at random times.  In the preferences, more precisely, I am able to choose the area that must go out looking for updates, but when I try to save the setup I get this exact error message.

  -----------------------------

  AdobeARM.exe

  The procedure entry point CreateProcessWithTokenW is not found in the library of Hotlinks ADVAPI32. DLL.

  -----------------------------

  The computer is an old laptop running Windows XP.  I think that it's Windows XP is a key reason why the error occurs.  That said I can't replace the laptop right now so I would turn off rather updated.  I've updated to the latest version of Adobe Reader from the Adobe Web site.  The new version added a 4th checkbox in the section to turn off the automatic updates, but I always get the same exact error message.

  Is there a hidden Windows Settings folder I have can be directed to Adobe Reader?  A file where I can change the automatic updates option from 1 to 0 to turn it off?  Because the software does not work.

  Please, create the following registry key:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]

  "bUpdater" = DWORD: 00000000

  In addition, you can run msconfig (via the Win + R), go to the Startup tab and deselct point of 'Adobe Reader and Acrobat Manager' (which corresponds to the process AdobeARM.exe), press on apply and restart your machine.

• cannot do the automatic updates on windows 7

  I'm on windows 7 and my auto update cannot do automatically also when I try to install it it had problems of error.

  I'm on windows7 ultimate, and this occurs even on 32-bit professional front.

  I got error code 8024402F

  Repost:

  How to reset the Windows Update components?
  [Ignore the section to APPLY to;] KB971058 access via IE8 32 bit only. Run the difficulty in DEFAULT and AGGRESSIVE modes, and then restart your computer]
  http://support.Microsoft.com/kb/971058

  Did you do a reset again and if it has solved the problem? [Yes/No]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot perform the automatic update of Windows via IE

  After the new installation of Windows XP Pro, Windows Update site reports "the website has encountered a problem and cannot display the page you are trying to display" trying to Express/custom install. Tried restarting, cleaning cookies, but nothing works.

  Thank you

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  http://support.Microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page.

• Cannot turn off automatic updates

  Often I got this popup annoying message asking if I want to "enable automatic downloads for this device", the problem is that I can't seem to understand why its appearance.

  I've disabled all 4 buttons, music, applications, books and podcasts and updated, but it still appears.

  Having been chosen over all of my devices on iTunes also. Tried logging in and out of all my devices

  Having the iPhone 6 s & Macbook pro retina 2013.

  * Can not activate the buttons either because it seems that they themselves put it off.

  http://imgur.com/a/Nl3Cr

  This message appears upp and stop if I logout on the account of the appstore. Sound in Swedish.

  AFAIKT on IOS devices it only gives you an option to remember later.

  but in OS X you can turn it off.

• Cannot install the automatic updates

  HIII.

  I have an Acer E - 572 G, and it's just more than a year. Usually it will update automatically every once in a while when I turn it on, but for the past two times he took a long time to update, before a message appears saying: it was "impossible to install updates. Undo changes. "This whole process takes about half an hour, and I have no idea why he suddenly can't update?

  Also; I have had problems since I've upgraded to 8.1 Windows - when I try to shut down my computer, the screen goes black and it does not, but she is still ongoing, and I held down the power button to stop it every time.
  Is as if I'm trying to close the cover (so as a disconnection or put in rest mode) it just goes black and unresponsive not but retains current execution until I'm physically turn off the power.
  I heard remains with sometimes is not good for the computer to stop like that, so I don't know if that could be linked to her now all of a sudden will not be updated?

  (And, btw, I contact the Acer and Windows after that happened, which is about a year.) Windows Me Acer necessary to upgrade their servers to accomedate the new upgrade and Acer told me that Windows needed to come up with a new update that worked for their servers - aka nor offered any help also, and nothing happened to solve the problem.)

  Any ideas as to how can I fix? :/

  Elen,

  I think the problem you are having with your Windows updates can be what we have in this article. See this article and if it's what he does, just let it do its thing. I also think that you may need to run an Update on your system, if it is to have some problems, to see if it will fix it. If you can't have Windows to run the update, try the procedure described in this article.

• Software of third parties cannot run their automatic updates

  Fully working to update Windows 7 Professional (x 64) on a custom desktop. My problem is that I can't get back specifically not updated for a number of products of third parties, including:

  • The Adobe Flash Player installer
  • iTunes
  • Origin
  • StarCraft Setup
  • CyberPatrol installer
  • Skype
  • Spybot S & D

  The funny thing is that many of these products have other web services that work very well. For example, all Skype services work. I can access the iTunes store and the Bank of origin without any problem. Apart from these programs, the internet itself works fine - I can browse in IE and FireFox with also good results. I can also surf the internet within the steam with no problems - it is fair updaters that fail. And they all give similar errors with regard to not being able to connect to the internet. Updates Windows has no problem - last update was 28 and I had this problem for weeks, longer than that.

  This made me suspect a firewall issue was at stake, so I disabled temporarily all firewalls and security software to test these programs, but it did not help. Including turn off Windows Firewall, all services of Avast, stopping CyberPatrol, Spybot... I don't have any other products like Malware Bytes, etc. Just for fun, I also created a few exceptions in the services to communicate my problem in/out appropriate programs.

  The event log shows these update services calendar out or simply crashing when they try to connect to their servers. DNS and other TCP/IP settings are set to automatic. I don't have a proxy set up - which is also the default value. Just for fun, I went ahead and reset winsock, and which did not help the cause.

  I feel that it's a really obvious answer, but I am confused. Help would be appreciated - any ideas?

  All your software up to date there through any firewall access, you can have?  When testing if a firewall is a problem (except for the built-in Windows Firewall), it may be necessary to uninstall any third party firewall, as it is just deactivation is not enough because many parameters remain active even after you turn off.

  Have you tried to clean the temporary Internet files. Cookies, etc. ?

  Your updates have already been successful in the past?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• He cannot get the automatic updates to work. Windows XP Edition Home Premium!

  I had a crash and had to reinstall.

  I had a crash and had to reinstall.

  You must get this patched SP3 first machine.

  Uninstall Internet Explorer 8 and Internet Explorer 7--> you back all the way back to Internet Explorer 6 before continuing (if necessary).

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

• Automatic Updates does not not for Windows XP

  Try to update my Windows XP from SP2 to SP3 but keep getting error code 0 x 80240036 and can't figure out what to do?  I cannot set up automatic updates website.  Help, please!

  Hi T_Hernandez3,

  Download and run windows xp sp3 from the link provided below and when you're done, restart your computer and check again site Web of WU.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warnings on THIS subject the professionals and network facilities.

  Let us know how it turns out.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Unable to turn on automatic updates #0 X 80070424 error

  Have you tried all the spectacle of simple solutions-all the scans PC free of interference of virus. Still cannot depend on auto. updates

  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll

  Click OK

  If this does not work, proceed to the next article-

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

• Unable to make a selection in the context of important updates. Grayed. Open as administrator and not user account can not change to receive automatic updates

  Sign on the user account as an administrator, but cannot change the automatic updates.

  Under updates important area is grayed out and cannot select to change

  Hello Bill,

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem, you cannot change the automatic updates even if you are logged on as an administrator user account. The option is grayed out on the system.

  Certainly, I understand your concern.

  I would suggest trying the following steps and check if that helps.

  1. Open the editor of the register of the command RUN by typing "regedit" and click OK.
  2. In the tree on the left, open following files-online HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate.
  3. Remove the automatic "Update" folder This will remove all previous settings for automatic update.
  4. Open the automatic update of the control panel and option as usual.
  5. If automatic update is always gray, type the command "gpupdate/force" RUN and click OK or restart the operating system.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.