Cannot depend on Security Center "the Security Center cannot start."

Similar Questions

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• When you try to activate Windows Security Center, receive error message "cannot start Windows Security Center.

  try to open soundcards Security Center declined as I click to put on there is one message the servicem of windows Security Center cannot start...

  * original title - disable windows security center service .How can I makr turn on please *.

  Hi tsedeyasefa,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Security-Center-service-cant-be-started/49277301-85c2-4B13-9f71-1bd08e4688a0

  I hope this helps!

• Windows Media Center Gets error: invalid Application - cannot start

  Windows Media Center (of the month last Vista 32-Bit)

  I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center.  They are all under the TV + movies option during the WMC.  I get an error saying [invalid Application - cannot start "" ""].  Not sure if this is because the internet connection that I use is not one that has a user name or password.  Not know how to configure it for this version of Windows.  I don't get this problem when you use Windows Media Center in Windows 7.

  At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
  http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9

  "Invalid application-unable to launch" Windows Media Center - MSNBC.com
  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f

  "Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
  http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719

  I guess that set up WMC is identical in both Vista and Windows 7?
  http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/

  Your firewall is blocking access to the WMC?

• According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started

  Basic services of the title: original TMP (TBS)

  I'm running Windows 7 x 64 SP1 Enterprise Edition.  We use DDPE to manage BitLocker.  Laptops are not encrypted.  According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started.  Open services.msc and realized that TBS was not even as a service.  Research on TBS and found it's relies on the file "tbssvc.dll.  This file is not anywhere on my PC, (should be in Windows\System32).  I hope someone can help me with the following questions.  I'M assuming that TBS is a Windows service?  He would appear in a standard installation? Windows Update?  If it is standard, and it does not install, is there a way to reinstall the service?  I found a link on the Dell site that got copy tbssvc.dll from a work computer, paste it to a computer for non-working, create new registry keys and register the dll from the registry.  It works, but I prefer not to go down this rabbit hole if there is a simpler solution.  Thanks for your help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• Win 7 Media center must rebuild the library whenever he starts.

  I have a frustrating problem with Media Center in Windows 7.  He is a dedicated Media PC that is used primarily for music.  Whenever I have run media center and select the music option, remember all the information of the library for each category.  Since it loads in album it takes 5 to 10 min. to get information (albums, works of art, etc.). Then when I go to the Genre, he goes through the same process.  This is repeated whenever I select a new category.

  As long as the PC is on and information process was done once for each category, it works better.  Once the PC is turned off and restarted it must go through this process again.

  I used Media Center in XP for years and once he has sought and collected built the library is easy to use.  When the PC is started again click MC select music and all loads of information in a few seconds.  It seems that MC in win 7 is a step backward, unless there is something I am doing wrong.

  I downloaded the drivers for my sound card. display and motherboard.  All files are stored on the PC.  I had the problem on three separate PCs.  Although two of them, I went back to XP.  Before going back on the third, I want to see if there is something I can do wrong.

  I suggest that you try to reset the media library of WMP. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists. Tim Baets
  http://www.BM-productions.TK

• Security for the family (Windows 8) started blocking * some * 2013 Office apps (Word, PowerPoint)... but he used to work.

  I'm having this same problem, and would be grateful for the help.

  I have a laptop Windows 8 with 2013 Office installed. I put no administrator accounts for all members of the family except me and turned on Family Safety, blocking all applications except those approved by me. It was all working well for about a year, until very recently (maybe 2 months ago).

  One day, the wife and children reported Family Safety started MS Word it blocks all their user (non-administrator) accounts. And this will happen * after * the application was already started for a minute or two! (I don't know what has changed, or if there was a Windows update that has just occurred, etc.). Word would be arrested, and invite him to the dialog box asking permission ("my mother is here... ") appeared. Enter the correct credentials admin does not help, and Word does not start with the subsequent launches. I repeat the question now.

  Other comments/symptoms:

  -Word and PowerPoint are blocked, but Excel has worked well.
  -All 2013 office applications work fine on the admin account.
  -Parental control settings are correct (I quintuple checked now).
  -Disable the parental control completely to any non-administrator user account allows applications Office work very well on this account.
  -Create a new user account not administrator for... This test also the same problem.
  -In the course of running Windows Update (to date) and reboot... no change.
  -Don't search other discussions of the forum... no joy or solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-has-family-safety-Windows-8-started-blocking/6d32f9dd-BEF7-4DEE-A2D2-e7e18a5e18cb

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/family-safety-does-not-allow-Office-2013-apps-to/9e63204d-820D-4894-8F1C-1453d9d7aa76
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  Help! Word is the program children use more and disabling all parental control so they can use it is really back & broken.

  Thanks in advance

  I still have the same problem as John.  I tried all the remedies, including this Court, but nothing seems to work.   Family Safety blocks even MS Word.

  Hey Wolfe Pack.

  I have not tried the suggestion of Winston to remove all files for the parental control settings again. Did you?

  In short, this is what I tried in the place, which seems to have helped:

  In the admin account, I opened the dialog box to manage parental controls for a child's account settings. Then clicking on the link to the installer apps are allowed. I chose "X can only use apps that I leave" and then at the bottom right you click the box 'disable all' to deselect all applications.

  I have logged on to the child's account, then launched the word and allowed him ("my mother is here... ") before any other apps or background allowing deals who wanted permission to run. Launched Word then OK. Then, in various other applications were to be used and popped up, I allowed, too. It's annoying because it meant a lot of Bing and type the admin password for everything that I wanted to use or that runs in the background, but seems not have allowed Word to run again.

  This could end up being identical to what Winston has proposed (by deleting all files, effectively erasing all parameters). I'll see how it goes. Let us know if you try it.

  -john

• Adding files in Media Center gives the error "a necessary component of the WMC did not start successfully. Restart WMC. "

  I try to add files to WMC, but when I do a box arrives with "a necessary component of the WMC did not start successfully. Restart WMC"I did this several times, but the same message keeps coming back. Can anyone help?

  I think that your account has administrative privileges.
  You can create another user with administrator privileges and then recheck the problem there.

• Cannot start in the middle of the upgrade from Vista to Windows 7

  Try to upgrade one of our own machine for future larger deployments. Windows Vista business to Windows 7 Professional.

  A ran the Advisor Windows 7 and got a little nudge upward after updating Nvidia 7300GT drivers for Windows 7 plug.

  It goes through the process, gather information, copy files... etc. 90 minutes later, it stops and tell me that it cannot start depui this facility. Click here and out you go!

  Don't want to do a clean Reload because tons of the toreinstal program.

  Any suggestions?

  Thank you

  Michel

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• "Error system, the program cannot start because missing d3dx9_43.dll.

  Original title: error

  So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

  I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

  "I have tried several methods, but many of them do not work.

  This does not tell us what you tried, so I'll start at the top.

  d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

  (even if the "latest" DX files come from 2010).

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

  The second option is often necessary because you don't always get a specific file mentioned in the error.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Error - the program cannot start because MF.dll is missing on your computer in Windows Live Movie Maker.

  Original title: problems with Windows Live Movie Maker.

  I've had my laptop recently wiped and I installed all the drivers needed and antivirus. I have Windows Live Movie Maker on my laptop previously. But when I tried to download Windows Live Movie Maker it does not work. (about 7 times now.) Works fine Windows Live Photo Gallery PERFECTLY every time. but the Windows Live Movie Maker does not work.
  He used to have the error
  "Director of Windows cannot start because WMVCORE." DLL is missing from your computer. »

  I recently fixed this error. Now, he's saying,
  "The program can't start because MF.dll is missing on your computer."

  I've tried EVERYTHING.
  Download updates windows, reinstall (several times over a period of a long week.) and the package of refreshment, that NEVER ends and just said that it cannot continue. (He said it'll take 15 hours to install in the first place)

  Is there something that I am missing?
  Please help me. I need it for my business.

  Hi BrookeSmith,

  When you face issue in Windows Live Movie Maker, I recommend that you post your question in Windows Live Solution Center for assistance.

  http://www.windowslivehelp.com/

  Hope the helps of information.

• Cannot open applications, error: "the application failed to start because its side-by-side configuration is incorrect...". »

  Original title: cannot open applications

  I am trying to open apps, and it says "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. "I tried to download C++ from an existing thread already, but when I try to run it, I get the same message. I have a x 64 bit system.

  Hi Alex,

  I suggest to uninstall all versions of Microsoft Visual C++ Redistributable installed on your computer and then install the latest version.

  To uninstall refer to the articleUninstall or change a program".

  After uninstalling, download and install "Package redistributable Microsoft Visual C++-2010 (x 64)" from Microsoft Download center.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  Package redistributable Microsoft Visual C++ 2010 (x 64) SP1.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13523

  Keep us updated on the status of the issue.