Cannot depend on VM after upgrade hard drives

Similar Questions

• Cannot install recovery image on my Equium after upgrade HARD drive

  Hello

  I just installed a new hard drive for my Toshiba laptop Equium I contacted Toshiba who informed me that I could mount up to 1 TB, I opted for with a 500 GB at halfway.
  After installing the drive I inserted the disc of recovery after a while, it was loaded with the operation completed successfully message. Next message put in place windows could not configure windows to run on this computer hardware. Then windows could not complete the installation to install windows on installation, this restart of the computer...

  At the end of the restore process a message tells me to remove the recovery disc and output as soon as I get the laptop stops and doesn t re boot automatically. During the next restart windows message Vista starts for the first time then the cycle starts again. I tried to reload several times recovery according to the instructions, but not good.

  Any help much appreciated

  I put t know which model of laptop you have, but if the recovery image is Vista, it must be quite old model, maybe Equium A200.
  To be honest I didn't experiment with the upgrade of the HARD drive on older models, but I can imagine the image recovery are a problems with hard drives with huge capacities.

  Display please model name and which HDD you inside now.
  By the way: if possible, try to install Win7 using Microsoft installation disc. I m it will be safe works without any problem.

• Satellite L300 - cannot install Microsoft updates after replacing HARD drive

  I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

  Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
  Then I borrowed a 160 GB of work and went through the same process and everything works fine.

  To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

  > ... Standalone Vista SP2 I downloaded will not be installed
  Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

  Let the system to install all the updates and don t force the installation of some own downloaded stuff.
  Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Can not activate CS4 Web Premium after the upgrade Hard Drive Mac OS x 11.3

  I can't access any program now CS4 after upgrade my hard drive to an SSD. I get a small dialog box saying "license for this product has stopped working. Error code 150:30"MacBook Pro, OS X 11.3 (el Capitan). The chat tech support person told me that CS4 is "not compatible" with El Capitan, but I've been using Cs4 for several months now with El Capitan, so it's not true.

  In the past, when I've got a new Mac or upgraded the operating system, I had the opportunity in an Adobe dialog to enter my serial number in, but this is not the case now.

  Nothing has changed since this morning except my newly upgraded hard drive. Except that this time I don't have a way to enter my serial number and reactivate.

  Can anyone help?

  Error 150:30 - error "Licensing has stopped working". Mac OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

• Error message "" serial number entered is valid, but calling it a product irritate lies on this computer "appears." Cannot reinstall CS5.5 on my macbook pro after that hard drive crashed and was replaced.

  Error msg "the serial number you entered is valid, but cannot find a product calling on this computer" appears. Impossible to reinstall CS5.5 on Macbook pro after the hard drive crashed and was changed.

  Hello

  Thank you for your response. I've finally managed to connect with a support staff through the online chat portal & advises him to download CS3 web premium. Tried to find it, but this option is not available in scrolling to the bottom of the box. Ultimately, the staff had to help me to unlock the CS5.5 update manually from its end. He indicated that, in my case, the situation could not be resolved through this method, and I'd still have to contact support via the portal chat staff to help unlock my CS5.5 If this problem occur again should I need to reinstall it on a new computer laptop.

• Activation on upgrade hard drive on a MAC

  Upgrade hard drive on a mac, running windows on the same computer - activation code for windows is no longer valid, cannot run windows cannot get numbers of activation support

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• Cannot transfer files to an external hard drive to a second and the error is "error copying file or folder. "Impossible to copy ' file/folder name.

  Original title: cannot transfer files to one external hard drive to another

  An error message is displayed: "error copying file or folder." Impossible to copy "file/folder name. "The destination folder is the same as the source folder.

  Peter Tiedemann

  Hi Peter,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to transfer files from an external drive on another drive. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  1. Do you receive any error or display message?
  2. Did you recent hardware or modifications to the software on the computer before this problem?

  Try the methods and then check after each method:

  Method 1: Transfer files from a drive to the location on the desktop or a temporary folder and then try to transfer them to the destination disk.

  Note: make sure the free space on the disk in the destination drive.

  Method 2: Run the Fixit:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 3: Disconnect your player safely, and restart the computer. And then try to transfer the files.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Firebird 802 - upgrade hard drives - Solid State / hybrid anyone?

  I'm upgrading hard drives on my Firebird 802 (the part the WEAKEST of my Firebird and the SMALLEST score on Windows Index). I replaced the drive secondary with a Seagate 500 GB SATA drive at 7200 RPM (ST950042 4AS) and REALLY improved performance (I have my file on the secondary drive).

  It's now time to upgrade the MAIN disk. I'm looking at a "Hybrid" car A Seagate ST95005620AS Momentus XT 500 GB Solid State Hybrid Drive - 500 GB, 7200 RPM, SATA 3 Gb/s.

  Has anyone tried upgrading the main drive of a hybrid? For a solid Sate drive?

  Thank you

  Enzo

  Well WELL, @ 10:39 PM PST after FOUR and a HALF and TWO attempts of the hybrid drive WORKS as my main drive on my Firebird 802!

  Using the data transfer software CMS Bounceback ($14.99 per download) the program was missing several files that were essential for the computer to boot. Once I checked the transfer journal and moved the files myself IT BOOTS!

  THUS, in a few weeks, I'll post the kind of increases in speed that I experience. First comment, my drives are running @ 98 degrees F. It's HOT, so I'll have to come back a fan for the hard disk enclosure, in fact, you can put at the front of the box and jump through this background grid. Going to put in place tomorrow. Now I'm BEAT!

  Thus, it CAN BE DONE on your Firebird! Solution, HERE!

  Thank you!

  

• 6400 upgrade Hard Drive just SHRUNK... Once again!!!

  First of all let me state that I am ready to throw my computer and TWO 2, TWO Yes upgrade hard drives out of my 2nd floor window!

  OK, my wind is done, for now.

  I have an Inspiron 6400 with HDD 80 GB of origin (73.1 GB space.)  I wanted to go to a Western Digital 250 GB hard drive.  I bought the drive and cloned it.  My first attempt was a purchase Norton Ghost program (after the $150 for the reader, that's another $50 for the program) I cloned it from the laptop via a USB - SATA connection.  Everything seemed fine, until I swapped hard drives.  He got through the BIOS, no problem, then started to windows.  Immediately, it projected blue and that was that.  Swap return original hard drive, everything OK.  Put old drive in the spare computer/SATA slot and realized that the reader shrunk to 73.1 GB. . the SAME SIZE as the original drive.

  After days/weeks and literally probably 5 to 6 hours of troubleshooting, downloading about 4-5 programs, utilities, etc, and have EVERY single utility, test and program otherwise tell me the car was very good (less the fact that he was now 170 GB smaller) I thought that drive was simply bad then returned.  (After fighting with Tiger Direct, I had to return it directly to WD, but they at least sent me a replacement unit before that I had to return the first...  (where my 'two' drives))

  So I have the new, 2nd hard drive in hand and I say to myself that I would be the clone differently, from my desktop (Dell 690) who had a few ports SATA spare on it.  I cloned it with a different program and once again, everything seems to be okay.  It showed in my office.  This time, I've set manually the new disk partitions to what I end up with.)

  So I put the new, larger, cloned drive in the computer, booted and BAAM!  Exactly the same thing.  Blue screen stop...  And guess what... The drive is now 73.1 GB. . and once more, there is nothing I can do to bring back to 250 GB... any computer, software, utility, etc. I throw at it or throw it out in...

  Back to Western Digital... but this time, I don't know yet what to say or how to proceed.

  My questions are:

  1. What is happening and why I can't get a 250 GB drive in the machine.  (I can't find ANYWHERE a maximum limit of hard drive)

  2. any thoughts on how to get my drive to the correct size of declaration?

  I'm really steam it... I have never spent so much time on what should be a simple question in my 15 years and more and about 20 + systems of computers through my hands...

  Thanks in advance

  Blake

  Message edited by blakemiller 27/03/2008 17:05
  
  

• After a hard drive failure I buy adobe acrobat?

  I buy acrobat after a hard drive failure?

  Lol you can probably download Acrobat through the following page (depends on the version - download and Installation Help) and use your serial number for it to activate it.  You should be able to find your serial number through your Adobe account online.  You can also find a download for Acrobat there if you bought through Adobe download.

• satellite 2520cdt is very slow after replacing HARD drive

  My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
  I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

  I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

  Is there a solution?

  Hello

  I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
  However, try to defragment the HARD drive.