Cannot display Flash objects in Google Reader

Similar Questions

• Security accounts children families cannot display flash media

  Hello.

  I have configured Windows Family Safety to our two children.  They each have their own pc, Windows 7 (32 bit).  Everything seems to work fine, except that they cannot view flash on the allowed web sites content.

  I have a Parent Windows account on the same PC that can display content - no problem.

  I tried with MS Internet Explorer and Google Chrome.  Both the active Flash plugin.  When you load the page in IE, we see a message saying that the Flash is necessary.  Chrome, the page remains blank.  Chrome version 41.0.2272.118 m.  Flash version of chrome: 17.0.0.134.  MS IE 11.0.9600.17691 Flash 17.0.0.134.

  I looked in the parental control to allow Flash as an application, but it is not listed as flash or shockwave.

  I'm clearly missing something.  Can anyone help?

  Thank you.

  Hi Harry,.

  Sorry for the late reply. Follow these steps and check if that helps.

  1. Connect to Web site Family Safety.
  2. Click on your account of the child.
  3. Click on the application of the Restriction and turn the power off and check if the problem persists.
  4. If dosent problem persists please check if the Adobe application is allowed within App Restriction.

  I hope this helps. Let us know if you need assistance, we will be happy to help.

• Cannot access flash content in adobe reader

  Opening of flash content in Adobe reader cause Adobe reader to advise me that this "flash player" is required.

  I cleaned and reinstalled the latest player flash and adobe several times.

  I have reset the internet and checked the plugins options

  I've installed shockwave

  I checked flash works very well in internet explore

  I tried the "repair installation" in Adobe Reader.

  I scanned the registry manually and cleaned of all the adobe registry entries then reinstalled all adobe applications (they're all as if it was their first time and was working properly).

  ANY help would be appreciated.

  You must install the Flash Player plugin.

• Cannot display Flash video - tried everything

  I'm the webmaster in the business, and we add a Flash video on our site. I used the FLVPlayback component and publish in Flash 8, like any other time, I used the Flash video. Here's what happens:
  
  I can't go to open the file with the HTML file, double-click it, in IE or FF, and I see the video (example: file:///D:/test/page.html). If I try to send the link out by specifying a path http:// to the test server (example: http://home.mysite.com/test/page.html) -just as I do for all other web pages to test which must be reviewed by other government departments - PERSON can see the player or the video, no not even me or the network administrator. Just a white box where would the .swf.
  
  We have updated all the player, but no luck. We have added the .flv MIME type in IIS and restarted the server. Still, no luck. I posted the page HTML, .flv and .swfs in a test folder on our Web site, and who does not show either. But even once, if I click on the HTML file in the folder to see it this way, it works fine.
  
  Any ideas? I'm starting to lose sleep on this one. Thank you. Text

  The only 'problem' I can see in the HTML (uncommitted, the source of the linked page views) is that you don't have the tag in your object, but you in the . Everything should be doubled in your flash object, once as a and as an attribute of the .

  So I quick-downloaded your swf file and ran it through my decompiler to see if I could find anything wrong. The swf file is obviously there, I was able to do this. The path to the flv file in swf (which is what I see in the window to decompile) looks that it points to a disk and not a Web site. Maybe that's the problem that people have. I would like to change this path to a relative path (3.flv instead of U:\... 3.FLV). If people are still having problems with it, my next suggestion would be to make the flv contentPath and skin absolute paths ( http://www.ecfmg.org/test/3.flv and http://www.ecfmg.org/test/SteelExternalAll.swf respectively)

• 39L4333DG - cannot display Flash content in the web browser

  Hello

  When I try to access sites Flash web browser displays "Missing Plugin" in the framework where the flash player should display the content.
  I'm omitting something?
  I installed the latest firmware: 7.1.90.34.01.1.
  For a TV to 2013, it's boring is not to have a complete recommended web browser on a SMART TV.
  Are there opportunities to have a full web browser in the next version of the firmware?
  Thank you.

  When I had similar problems with Toshiba response was that the browser is intended for limited use. My problem was not being able to access any site that requires a password. Not rocket science you'd think!

• Cannot display the menu plugin in Reader using the plugin active player.

  Hello

  I am an active reader plugin. I had the built-in key Reader by Adobe. I used this key with the SignPlugin tool to make my Player plugin active.

  The tool SignPlugin returned message successfully. Then I loaded my Adobe Reader 9.0 plugin, but the drive didn't show my menu plugin.

  Can someone please tell what I am doing wrong?

  Thank you

  If you activate a plug-in with Reader 9 and X is quite the choice of Adobe, so you will need to communicate with them about it. If they do not provide a key that works for an older version, there is no work around.

  I recommend that you test XI Acrobat and Reader XI just to be sure your initial conditions. Many plug-ins do not load into Acrobat XI, even if they have loaded in Acrobat X - although new projects with the SDK software Acrobat X do not exhibit this problem.

  For as far as I know, you MUST use READER_PLUGIN too or the plug-in will not charge. Don't know how this corresponds to the statement that PDDocSave can be used (on the active Reader documents).

  In the opposite case

  -I recommend test you if the initialization of the plug-in is called (with the debugger or message - use MessageBox, not AVAlert).

  -Check the system log, sometimes Adobe writes things out there.

  -Be option 'Use only certified plugins' is turned off in the preferences of the reader

  -First test in standalone player, not a browser window.

• Cannot display flash file in IE

  Hello

  I have a flash banner on my Web page but when I go to view it in IE I can't.  Dose - what someone know why.  The page is www.plasticcardsireland.com/index1.html

  Thank you

  You downloaded the AC_RunActiveContent.js in the Scripts folder?

• Cannot embed flash content in air html

  Everyone please help me:

  This is the code in app:/app/m.html:

  < object type = ' application/x-shockwave-flash' width = height = "72" "22" > < param name = "movie" value = "app: / upload.swf" > < / param > < / object >

  If the tag < clear > true < / transparent > in the application.xml, cannot display flash content:

  

  but when I remove the tag < clear > true < / transparent >, the flash program:

  

  is this a bug of air runtime?

  How could I make the flash show?

  btw: I need the tag < clear > true < / transparent > in application.xml.

  Hello

  I think it's the so-called limitation for the rendering of SWF, see 1.5. * release notes:

  s http://www.Adobe.com/support/documentation/en/air/1_5_1/releasenotes_developers.html#issue

  Content of the SWF file in applications using transparent windows

  Content of the file SWF in HTML format is not correctly displayed for applications using transparent windows.

  I advise you to ask a team of admission to the status of this issue in future versions,

  Kind regards

  Peter

• TypeError: Error #1034: Type coercion failed: cannot convert flash.display::MovieClip@64e6ca1 in fla

  Hi all

  I get this window pop-out error when I pressed a button. The earpiece button contains the following code:

  btn_start.addEventListener(MouseEvent.CLICK, gotoStart);
  function gotoStart(e:MouseEvent):void{ 
       btn_start.removeEventListener(MouseEvent.CLICK, gotoStart);
       gotoAndStop("START");
  }
  

  TypeError: Error #1034: Type ISP led constraint: cannot convert flash.display::MovieClip@64e6ca1 to flash.display.SimpleButton

  at flash.display::MovieClip/gotoAndStop()

  to attendanceCheck / gotoStart () [attendanceCheck::frame2:31]

  After searching the cause for a while, I can't find what's wrong with it...

  Help me please...

  Thank you

  Zainuu

  As I said, there is nothing wrong with this code.  So, since the error indicates that you treat a MovieClip, as if it were a SimpleButton control, somewhere in your design you have done something to try to force this MovieClip to be a button (or possibly vice versa if it's actually a button).  Check the properties panel and elsewhere to see if you have something that could be tempting to be that touches another object type than it is selected.

  Try to create a new movieclip and assign it to that name (detached from each other) and see if you still receive the error.  If it works, then I recommend just create a new movieclip and replace the current where the problem arose.

• "Internet Explorer cannot display the webpage" when you try to use the CAC reader

  When I try to open a session on the site of the army AKO with my CAC reader and card chip that I allowed to choose my credientials.  When I hit enter I get "Internet Explorer cannot display the webpage".  My internet provider is Mediacom.  I can log on with the same drive ACC when I use a Web service provided by a hotel close to my arsenal.  Where is the conflict?  Mediacom IT did not.

  Hi TommyZB,

  Welcome to the Microsoft answers site.

  ·         What is the version of Internet Explorer installed on the computer?

  ·         What is the operating system installed on the computer?

  ·         Is this the same computer \laptop that you use to connect to the site?

  ·         The problem is specific to this Web site or with other sites as well?

  You can try to add this site to the trusted sites and check.

  1. open Internet Explorer.

  2. click on tools.

  3. click on Internet Options.

  4. click on the Security tab.

  5. click on Trusted Sites

  6. click on Sites.

  7. Add Web site.

  8. click on OK.

  Now, check if you are able to connect to the site.

  This could be a problem with the settings of Internet Explorer on the computer; You can try to optimize internet Explorer settings and check, follow the procedure described in the link below:

  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213

  Try disabling the security software and firewall temporarily on the computer and check. Make sure that enable the security software on the computer.

  Understanding Windows Firewall settings: http://windows.microsoft.com/en-US/windows7/Understanding-Windows-Firewall-settings#section_4

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot display the Favorites button in the navigation of acrobat reader dc

  Cannot display the Favorites button in the navigation of acrobat reader dc. the document shows the Favorites in the earlier version of the adobe reader software. Any suggestions?

  Hi Sukritd15,

  I solved my problem! I had uploaded a PDF of a Mac OSX book

  10.7.5 with Adobe Reader XI (11.0.10) to another Mac OSX 10.9.5 and

  Adobe Acrobat Reader DC (2015.007.20033) via Dropbox. The transfer is wiped out

  all the bookmarks, including the Favorites button in the Navigation pane, because

  When I downloaded a new copy of the PDF book features

  has operated normally in Adobe Acrobat Reader ms.

  See you soon,.

  Barry

• Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. He

  Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. Help

  It seems that something has been added in the folder on the drive. I would recommend http://labs.adobe.com/downloads/acrobatcleaner.htmluninstalling the program, running, removing any left over parts of the record player (this could be the problem), reboot and reinstall. If all goes well, that solved the problem. Future questions about the player, you should consider asking in the forum of reader, is not.

• Why fields view object cannot display in the data control?

  Hello
  Work in jdev 11.1.2.3.0.
  I create two objects from view of the entities under the project module.
  and see the AppModule.xml as follows:
  ..
  < ViewUsage
  Name = "TransAccountVO1".
  ViewObjectName = "Project1. TransAccountVO "/ >"
  < ViewUsage
  Name = "TransAccountBillVO1".
  ViewObjectName = "Project1. TransAccountBillVO "/ >"
  ...
  Under the control of data panel shows these two nodes:
  -TransAccountVO1
  -id
  -name
  ---..
  + Operation
  + Named criteria
  
  -TransAccountBillVO1
  + operations
  + Named criteria,
  
  THE first node is ok, but the second miss (node TransaccountBillVO1) areas.
  Why fields view object cannot display in the data control?
  
  Thanks in advance.

  delete and Add again... the value editable forever.

• Cannot display objects from database using Visual Studio Tools

  Recently, I downloaded and installed the Oracle tools for Visual Studio (Oracle 11 g ODAC 11.1.0.7.20 with Oracle Developer Tools for Visual Studio). I was able to create a connection to the target database using the ODP.net; However, none of the database objects are visible in Explorer Server VS. For example, tables in Server Explorer folder was empty, as all the other files in the schema. Change display of object view to view schema did not make a difference.
  
  I tried the same connection using the Microsoft Oracle data provider and I have experienced the same problem. I could connect, but no data object was visible. When I checked the menu to change views, options were different. Instead of the object view and Schema view, I could choose my objects, all objects and user objects. My objects has been selected, then I changed it to all objects. After this change, I could see the data tables, stored procedures, and all other data objects that should be visible in the schema.
  
  What should I change to visible data objects in Server Explorer using the connection of the ODP?
  
  Thank you

  You have all the objects (tables, views, etc.) in your schema to which you are connected as?

  In the view "All items", if you develop "Tables", you will see all the visible objects for the logged on user. (objects other patterns of user and the schema of the user connected).
  Using odp.net provider, you must do the following:
  -Select "Filters" menu on the connection
  -In the dialog box that gets poster with the "Filters" tab
  -Select a collection must be set to 'connection '.
  -Select filter criteria, select 'Schemas poster' property, condition 'Is', for 'values', click on the button «...» "and in the dialog box that appears, click on the" > "button and the Ok" "button.
  -Click on the OK"" button.
  -Now extend your knot "Tables" and you should see all the tables visible to the logged in user.

• Pavilion a6430F desktop: cannot display this page

  Read a recent post on "Apps does not connect to internet" and felt that I had a similar problem.

  I am running Win7, SP1, 64-bit, on a desktop Pavilion a6430F with 6 GB of RAM on an AMD Phenom triple core processor.  I frequently get "cannot display this page" on this machine on some pages.

  This does not work on my laptop HP DV2620 old Win7 32bits or my most recent HP Slimline 400 Win8.1 64 bit machines running.

  Here's a url for example that works on units of the latter, but not on the first.  http://www.Samsung.com/us/support/FAQ/FAQ00059191/81528/

  There is a link to live chat on this page: https://sales.liveperson.net/hc/49151746/

  When I click on this link I get the "this page cannot be displayed" on the unity of 6430.

  Is happening in other places, like the links recommended on research such as Ask or Google pages, albums, but this one lately not on the search page.

  Accordingly, I find only a specific computer that deliver the 6430.  Check a number of parameters against the DV2620 and apart from differences of 64/32 bit, all the settings in the following areas is the same: the settings of the firewall, internet options in the settings of compatibility, SmartScreen and IE11, withdraws. However this particular page is properly on the 2620.

  I turned all add-ons, on and outside (separately or in the past), reinstalled Java to the latest version, also added the url to trusted sites, and remove and reinstall IE 11 completely (remove personal settings) with the feature of Control Panel...  Don't know what else to try.

  There is no unusual apps or software installed. And it has worked before. Now I don't know if a fix IE 11 Microsoft may have changed something?

  Anyone who might have ideas, I'd be happy to exercise this operating system little more.

  Thanks for your time and your thoughts!

  Well, is there more to this story than meets the eye... my eyes anyway.  For those of you who like to do things to protect your computers, you can install an application called HOSTS BLOCK of MVPS.ORG.  Beautiful small DNS utility of blocking that keep a little of the junk in the side frames to display in web pages.  However, most of the reputable places have found ways to circumvent the blocking of the HOSTS file, so I don't see a lot of value for those who are really paying attention to their web browsing.

  BLOCK HOSTS. I overlooked the possibilities this would be the source of the problem. But, as I reset the HOSTS file in windows > system32 > drivers > etc fashionable original and empty the cache DNS (run ipconfig/flushdns) the universe turned right upward and the error message no longer appears.

  Also, you need to return the DNS services on 'automatic' If you choose to remove the MVPS HOSTS file.

  It's easy to do in the command run by typing "services.msc" (without quotes) click OK at the prompt and get off at "DNS Client".  Right click and select 'Properties' then click on the drop down arrow for "Startup type" and choose "automatic". Apply or OK, and then restart the computer.  Pretty easy.

  In any case, BH thank you for your help.  After I thought about it, it was bit of a duh, but I guess it was easily overlooked.

  BTW - if you want to continue to use the blocker HOST MVPS, there is a utility on the MVPs.org site called HOSTMAN who allows to turn the blocker host MVPS and disable. I have not installed or tried this, so I can't vouch for it. Maybe someone else can do?

  All this to say, everything seems to be in order.  Hope this helps someone else.

  Good day and Merry Christmas - happy holidays