Cannot enable step 2 checking in Belarus. My country is in the list.

Similar Questions

• Cannot enable the wireless network adapter

  Hi all

  I have an old Dell Inspiron 1564 of 5 months with a Wireless 1397 WLAN Dell card. I had a few difficulties to connect to my wireless router, and as a last attempt to make it work, I have uninstalled and reinstalled the driver for my wireless card, using a new download of the latest version from the Dell support site.

  The driver seems to install fine and when I look at the card wireless in the Device Manager, it is enabled, but in "control configuration\reseau and Internet\Network connections" (which are accessible through the Network and Sharing Center), it is grey and says people with reduced mobility.

  When I click on activate in there, a small window opens saying "Activation", then after a few seconds, he says "Enabled" then disappears. However, the adapter remains disabled in Center of N/W & sharing and is not detected by Windows.

  I tried to reinstall the driver to install Dell drivers, as well as automatic windows driver search and no work. I also tried to do a system restore, but this does not (cannot finish on any of the restore points).

  I also spent 1.5 hours on the phone with Dell support and their final advice was to format and reinstall Windows.

  The same question is reported here and here, with no resolution apparent. Can anyone offer any advice I've already tried? Thank you!

  More details:
  -I am running Win 7 Pro.
  -Wired networking and internet connection works fine
  -J' have Zone Alarm and Avast Anti virus and I tried to disable both without success

  The same problem has been posted by other here, here, hereand here. It seems to happen with different brands of cards from NW.

  Hello

  Thanks for the reply. Actually, I got my wireless works today. The steps are, keeping in mind the stuff that I had already tried as stated in my original post:

  -Uninstalled Zone Alarm and Avast Antivirus.
  -Restarted mode without failure.
  -Uninstalled the Driver 1397 WLAN Device Manager.
  -Manager of uninstalled Dell Wireless cards Control Panel > programs.
  -Restarted in Mode safe again.
  -Reinstalled last bouquet of 1397 driver Dell (R237742.exe)
  -Rebooted in safe mode again to verify that the adapter was showing less active in Safe Mode, which it was.
  -Restarted normally to find the list is activated.

  Now I'm right back to where I was before, not being able to connect to my router, but I do not suspect my computer or my card wireless for the moment because I have four wireless devices in the House (this new Dell laptop, another 4 years Dell laptop, an 8 - month, Sony VAIO and a 6 - month old iPhone 3 g). All of these devices, the one that connects to my router is the Sony, so I think I have as well the router problems. I'll probably start another thread on the subject, just to keep this central thread.

  So to summarize, for anyone having the issue where your wireless card is showing disabled in Network Center and share and right click Activate this doesn't even after reinstalling the drivers the most recent, I would recommend to explore two options:
  -Disabling or uninstalling Antivirus software or firewall
  -Uninstall and reinstall the drivers Safe Mode Wireless
  If you are interested in reducing the problem a little, I recommend you to try these separately, probably the SafeMode option first.

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• your call cannot be connected please check your phone settings

  I can't make a call

  Whenever I tried to dial a number, even if it's fresh, to the toll free number or carrier Customer Support number.

  He always said, your call cannot be connected please check your phone settings.

  Try force reboot:

  http://support.Apple.com/en-us/HT201559

  If no joy, then talk to your cell provider or obtain a new SIM card

• PAVILION LAPTOP 17: Cannot install HP NETWORK CHECK for INTERNET EXPLORER

  CANNOT INSTALL NETWORK CONTROL HO FOR IE

  He doynloads and seems to be.

  But there is no indication in Internet Explorer.

  And the alert Message HP never goes away.

  I don't use IE less forced, like here.

  How to remove the alert SMS from HP?

  I had the same problem. I kept getting the same message after installing the network HP Check for Internet Explorer. After restarting the computer, I still got the message. Then, I opened the window HP Support Assistant and click "Check for the updates and Messages". The message went away.

• Cannot enable authentication for 802. 1 x

  Original title: I can't change the properties on my wireless adapter to get the authentication of 802. 1 x. I get the error message.

  I get an error message when I right click on my wireless connection. I want to access authentication of 802. 1 x. need help, please.

  You see the error of not being able to find a certificate because you select 802.1 x.

  For a home wireless network, you don't want the box "Enable IEEE 802. 1 x authentication for this network"to check.

  What was the problem that you entered in the Properties dialog box of your first wireless adapter?  Normally, see you the list of available wireless networks, select one, click Connect and enter the password when you are prompted.

  I suggest that return you to the "Wireless networks" tab of the properties of the wireless adapter dialog box (it should look like this) and "Delete" all entries in the list of "Favorite networks."  Then go to list "View wireless networks" and connect from there.

  In addition, the foregoing assumes that you use Windows to configure your wireless network card (see the checkmark in the screenshot linked above).  If you use another utility - that came with your computer or your wireless adapter - you should disable that and activate windows (using the checkbox) or read the guide of the user for the utility to determine how to set up your wireless security.

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• Windows cannot enable after several hardware failures

  A clean reinstall of Windows 7 Home Premium (64 bit) on a DVD, we had from 2010 can not (re) activate. Several consecutive failures material, suspected as being due to overheating (motherboard, processor and fans) in the last month, has left us with a system that was new from zero (case) but for the powersource, the graphics card and the hard disk, in which case the supplier of our new recommended parts clean reinstall in order to recognise the new hardware.

  In the middle of my attempt to reinstall, the computer crashed, and the new motherboard, surprisingly talky reported that he himself had protected comes from an influx in our unstable powersource (no wonder so many components grilled). So back to the repair shop we went. Once the store installed the new powersource, I booted up and a saw that the old facility was always present, with dialogue balloon to complain that he had to be activated because it recognizes new hardware. I ignored it and got down to the business of resettlement. Then I noticed a new problem... you guessed it... boom went to the graphics card.

  Finally, after the store installed a new graphics card, and we brought a new machine with an old hard drive, I downloaded a ton of updates, but has recently begun to see dialogue balloons that windows could not activate, despite the fact that I used successfully the code on the back of the case of the installation of the DVD before that. Try to activate from paragraph returns panel system "type a different product for activation key. The product key you entered cannot be used to activate Windows on this computer"Retyping does not help. Clicking "Buy a new product key online" brings me to this url: http://www.microsoft.com/genuine/validate/validationresult.aspx?displaylang=en&referrer=50888&p=&lcid=1033&req=00359-OEM-8703352-35871&OSV=6.1.7600.2.00010300.0.0.003.09.1033&LS=1&LegitCheckError=00000052&GenuineInfo=C004C008&Channel=16&ErrCode=4004F00C which downloaded a little script or somesuch that tells me "Windows validation in process This may take a few minutes, do not navigate away from this page." then when that's done , page happily informs me "Welcome to Windows! Because it is installed on your Windows PC is genuine, enjoy the security, the reliability and the protection it offers. "and the publication of Microsoft Security Essentials. While I am aware that it is authentic, it does not help me activate Windows or buy a new product key.

  I'll rather try you people first before attempting the option "automated phone system", because, obviously, automation has not helped me to this day, and I'd rather not spend time in the limbo of robot. Check the properties of the computer reveals a product which is quadripartite and digital ID, with the exception of the letters OEM in the second character, rather than the combination of letter-number 5 parts on my certificate of Authenticity sticker I have been stubbornly typing in the authentication area when prompted. It occurs to me that my attempts to install on a machine which has become essentially new piecemeal (with a power surge the Mid-install crash-induced) can read somehow as if this copy of windows has been installed on several different machines. Could be the problem? I have 26 days to go on my meter activation.

  License status: initial grace period
  Time remaining: 37860 minute (s) on (26 day (s))

  
  
  You will need to activate by phone and talk to a real person:

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

  Note: an OEM license may not transferred to another motherborad with few exceptions. If all goes well a representative of activation it will activate for you

• Steps to check within the mms.cfg settings are applied

  Hello

  Where are the steps to check the settings in the mms.cfg is applied:

  AutoUpdateDisable = 1

  SilentAutoUpdateEnable = 0

  Records reflecting these values?

  Anywhere to get verification?

  Thank you

  DOM

  Hi dominiqued97063621,

  You can view tab updates in Flash Player item in Control Panel.  Go to control Panel\All Control Panel items and open Flash Player then click on the updates tab.  Update should be set to "never check for an update".

  --

  Maria

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• EOA: The query cannot be parsed, please check the syntax of your query.

  Hi all
  
  I have a 'DEVETL_OAE' scheme that OAE is set up. I am able to connect to this schema using Toad/Sqlplus and I can access a table "INFA8_INS_NEW" located in "ADW_DEV_REP" scheme.
  
  "ADW_DEV_REP" scheme gave a grant to select this table in a role of selection (i.e. ' ADW_DEV_REP_SELECT') SELECT 'DEVETL_OAE' 'INFA8_INS_NEW'.
  
  I can run a query in sqlplus and I am able to access this table as "select * from ADW_DEV_REP." INFA8_INS_NEW'.
  
  But, SAQ, when I try to create the region and source, when I'm trying to ' select * from ADW_DEV_REP. INFA8_INS_NEW' sql, I get the error message like "Query cannot be parsed, please check the syntax of your query. (ORA-00942: table or view does not exist) »
  
  What should I give manual grant to the schema 'DEVETL_OAE' on ' ADW_DEV_REP. INFA8_INS_NEW' table?
  
  Pls help.
  
  Thank you and best regards,
  Vinay

  "Indeed, you must grant select on ' ADW_DEV_REP. INFA8_INS_NEW' DEVETL_OAE (so not through a role).

• When I try to check my plugins are up to date I am immediately linked to a java download page and cannot access the list of plugins

  When I'm in the Manager of the ad - ons and I click on 'check to see if my plugins are up to date' I am bound to the list of plugins that they are sent immediately to a java download page. I uninstalled java because of the ongoing security issues

  Try this page:

  • https://www.Mozilla.org/en-us/pluginCheck/

• in windows update when auto update is turned on, you cannot check I'll install updates it disables the automatic updates

  in the automatic updates when you click on install the automatic updates and choose to install them yourself it release to install the automatic updates. How to solve this problem?

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now do scroll down & tell me if ALL the other updates following up-to-date are listed? [1]

  (a) KB2699988, KB2685939, KB2709 [orKB2718523]162 & KB2707511; 

  (b) KB2676562, KB2659262, KB2686509, KB2695,962 , & KB2718704;

  (c) KB2653956; KB2661637, KB2598479, KB2631813 & KB2585542;

  (d) KB2393802 and especially KB971029.

  Most will appear as Windows XP security update , followed by the number in brackets.

  If IE8 is installed, one (1) appears as a security for Windows Internet Explorer 8 update , followed by the number in parentheses.

  5. is Firefox, Chrome or any other alternative browser installed?

  6. what version of Java is installed?  TEST HERE in USING IE (only!)-online http://java.com/en/download/installed.jsp

  7. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. CCleaner)?

  8 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  ========================================================================
  [1] the list of updates will change 24 hours right now.

• Cannot download plug in for windows media player. Have used the site to download and it says it worked, but the plug-in does not appear on my list of plug-ins.

  I tried to hear an appeal of a Web conference. Received a message, necessary plug windows media. Check my plug ins, no windows media. Reading about firefox support tutorial. Clicked on download. Had a window that requires repair or change. Tried to fix it and then change. Need better guidance on how to finish download. Download the message passed, but after firefox closing and re-opening, no still no plug-in for windows media in the list of plug-ins. Go to site and could not hear Conference.
  Reading support forum. Message while using about: config. Tried, typed in on: config in Start menu, but do not see anything that looked like I could change for real like message said.
  solved by opening internet explore and go to the website and listen to the conference call on windows media player. There was a message saying: If you want to enable media player click here. Not so heard Conference.
  Tried using chrome. You have to listen to the Conference yesterday. Today, he had the same message you need to plug in when I tried to follow the instructions in connect, it was just as confusing and useless like firefox. Most is that I tried to make any statement in the suggestions forum for firefox and can not get the windown media connect to appear in my list of plug-ins and can not hear calls for conference on firefox.
  Chrome said that they worked on connect available to the chrome store.
  I agree with the comments that I was able to go to web sites and to hear the calls before firefox did an update that removed my windows media plug. The fix simple download, two from windows, does not, apparently because firefox cannot find the fix. This isn't for lack of user, and it seems that windows attempted to provide a fix, and firefox does not recognize.
  Bottom line, it is easier to use another browser, that trying to get windows connect multimedia player installed on firefox. What is a browser, if you can not hear an appeal on the Web site the browser will take you to? Please make it easy install windows media branch on firefox. Thank you..

  If you get the screen to change/repair, it means that the Setup program has detected that you have already installed the plugin.

  Do you not see the file here:

  C:\Program Files (x86)\Mozilla Firefox\Plugins
  

  Its file name is: np - mswmp.dll

  If the file is missing, I suggest to delete and then reinstall the plugin.

  Edit: By removing and then reinstalling I mean using the delete button under the modification and repair buttons in the Setup program, and then run Setup to reinstall.

  For your questions, you can either (1) open the your profile page (drop-down menu of your username along the edge very top of the page) or (2) open the "sort and filter" section the questions above and click on the link 'My Contributions' (https://support.mozilla.org/en-US/questions?filter=my-contributions).

• While updating my profile facebbook, I clicked on the 'block profile image' option and a notification popped up that Firefox cannot display images on my profile. I can't access the pictures on my facebook page. How do I reverse this order?

  Cannot display profile pictures of friends and me, instead, Firefox displays only the names, fewer photos. I need to have the images released so that they can appear on my page. Kindly help. bold text

  Is he missing pictures then make sure you are not block images from certain domains (sphotos.ak.fbcdn.net).

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.