Cannot fade out layer

Similar Questions

• I have a modal using html and css that opens very well.  However, given that modal is on layer 2 layer 1 objects fade out (gray out) in the background.  I can't put the modal on the top layer, so that it appears on all my pages.  It is specifi c that

  I have a modal using html and css that opens very well.  However, the modal is on layer 2 that the objects in the layer 1 fade out (gray out) in the background when the modal opens.

  I can't put the modal on the top layer, so that it appears on all my pages.  It is specific to the single page on my site.

  Here is the link: http://www.ueonline.com/website_NEW/certificationsapprovals.html#openModal

  Any help is appreciate!

  You can create a separate mask for this specific page with modal to the top layer and then apply that master page.

  Thank you

  Sanjit

• Problems with Fade Out / Reload in State

  I'm having the hardest time trying to figure this one...  I have followed some good advice from these forums for this project in its current state, but cannot get it to work properly.

  I use a "wheel" which is a custom/generic component (such as a popup) composed of all the buttons.  Each click on the button it does two things:

  1. it transitions to a new state that causes the just clicked the button to rotate to the top of the wheel

  2. it fades into a new custom/generic component

  This works really well.

  The problem comes when I try to hide a newly added custom/generic component (via secquence action attached to a button in the new custom/generic component).  For some reason any the area formerly covered by the custom/generic component is more clickable.

  The other problem I foresee is if I can get the underlying custom/generic component buttons to work, I want to be sure that the "popups" (newly added in each new State custom/generic components) to reappear each time that the State is responsible.

  I don't know there are a few really simple fix for what is beyond me.  I have attached two screenshots of the 'wheel' and the 'wheel' covered by the 'popup '.  I also published the project in its current state to one. SWF file if anyone is so inclined to give a try.  If test you it, please note, I only worked on the first 4 buttons moving clockwise around the wheel.

  Would appreciate any feedback!

  Thank you.

  
  Drew

  Hi Drew,

  I think I understand your problem and have something for you to try.

  When you use a Fade out in a sequence of actions, the catalyst is animating the alpha (opacity) of the object from 100% to 0%. However, objects with 0% alpha still captures mouse clicks. The object must be invisible (which is different from 0% alpha!) to not capture the mouse clicks.

  Unfortunately, there is no way to set an object to be invisible in a sequence of actions. What you can do is to encapsulate the popup itself in a custom component. Instead of using a sequence of actions to animate it, create two States: hidden and visible. Set the popup to be invisible (disable the eyeball in the layers panel) in the hidden state. Then set up your fade transitions. Now, just to make each button click "play transition to State" the popup component, ranging from the visible to the hidden state or vice versa.

  -Adam

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I have a hp printer and cannot figure out how to load envelopes size 10 for printing

  I have a hp printer and cannot figure out how to load envelopes size 10 for printing. Any help would be appreciated.

  Hello HeidiZarecky,

  You can follow the instructions in this document to load envelopes for your printer.

• Fade out effect when you change screens

  Hello world

  I have a screen (the sheet object) with some objects (labels, imageButton, etc.) and I need to change its background of fadeing effect, and if it is possible do not change objects.

  One of the ways I see to create a new page with the same elements, but I couldn't find how to change an effect that will use the system of switching screens.

  All advice?

  You can use a docklayout for this. Place a container at the bottom with the desired backgroundcolor. Put from another container on top of that with the controls of your choice. After that, you can disappear or fade in the container with backgroundcolor as you want by changing the opacity. In your case, you must use an explicit animation (https://developer.blackberry.com/cascades/documentation/ui/animations/explicit_animations.html). Fade out background, when the signal that the background is dimmed, change the background color and fade in.

• Fade, wait a second and then fade out.

  I'm developing an application ActionSript 3 for Playbook.

  I use Tweener class fade and fade out a Sprite.

  I want to do an effect as I say in the subject, but I don't know how to wait a second after having melted and melted on.

  Any advice?

  There are a few things you could do:

  (I'm not suggesting this one first as the two interpolations can overwrite each other)

  Tweener.addTween( myMovieClip, { alpha:1, time:0.5 } );
  Tweener.addTween( myMovieClip, { alpha:0, time:0.5, delay:1.5 } );
  

  Or you could make the initial appearance, and then use a parameter onComplete to initiate another method to falter to the object.

  Tweener.addTween( myMovieClip, { alpha:1, time:0.5, onComplete:on_complete_method } );
  
  function on_complete_method():void
  {
       Tweener.addTween( myMovieClip, { alpha:0, time:0.5, delay:1 } );
  }
  

  There is more information here:

  http://hosted.Zeh.com.br/Tweener/docs/en-us/

  I hope this helped a little

• Fade out - I don't hear it

  I am a beginner. This sounds like a basic question, but for the life of me I can't understand this. I added a Visual fade a clip in a multitrack session, using the Waveform Editor. I see the fade out. I don't hear it. My apologies if this is obvious, I'm having a lot of trouble with that, especially in troubleshooting. Surprised I can't just chatter, considering that I pay monthly for it.

  John, I'm hearing, I'm sorry. It turns out that the fade is there, it was just subtle, so I don't notice it. My apologies, the bland and the other audio settings, take some getting used to and I find than deletion, I'm not happy with is a challenge to understand how - I am a novice. I appreciate your response!

• How to fade out selected area not to 0 in the Waveform Editor

  I remembered that CS3 hearing had effect "fade out to...". "but now I work in hearing CC 2015.1 and there is no effect"fade out specific value "... I only work in waveform mode, so please could you suggest any solution it?

  You use the effects > Amplitude and Compression > Fade envelope and choose the preset "smooth fade out. This will place a yellow line on the part of your selected waveform. What you can do now is to click on the yellow line to add keyframes and drag them around no matter what level you want to fade to stop (the values are shown on the display). You can record what your own preset if you will use it often.

• Anyone know how to "cone" and "fade out", a rule (online tool) at each end? Thanks in advance!

  Anyone know how to "cone" and "fade out", a rule (online tool) at each end? Thanks in advance!

  Use features of variable width.

• Cannot figure out how to turn on bookmarks.

  Cannot figure out how to turn on bookmarks.  Acrobat DC.

  Hi lawrencey66613426,

  If there are bookmarks in the PDF document, you can display them in the left navigation pane.

  However if you want to create or edit bookmarks, you will need Acrobat application so that it the thumbnails Page and bookmarks in the PDF, Adobe Acrobat DC files. Not possible with the free player application.

  Kind regards
  Nicos

• First broadcast 13 video clips fade out does not work for some clips, why?

  Operating system is Windows 10. Usually succeeds first items 13.1 video melted on accessible by right-clicking on a clip. But in some cases, nothing happens. In these cases, I managed to falter by using Transitions--> chained, but lacks the ability to use Bezier. What could be the reason?

  Ferro1945

  First elements 13/13.1 on Windows 10 (supposed 64 bit)...

  What are the properties of these clips for which "in some cases, nothing happens?

  You ask the bland as shortcuts or route of the applied effects tab?

  And, did you apply other effects to these clips before making the bland? Like Time Stretch?

  Please read the following should apply to more than 11.

  First Elements ATR troubleshooting: PE11: Timeline Fade Out shortcuts and stretched / remappe time video

  It is a long and detailed article. The Introduction summarizes the situation.

  If please consider and let us know the result, as your time permits.

  Thank you.

  RTA

• Tracks that slide and fade out

  I am trying to create an effect similar to what is in the video related to 01:28 Learn how to set boundaries when things get uncomfortable

  I've been so far able to understand how to make the white bar as a title, but I have a problem with the sync. I put it on track 2, but it does not start at the beginning of the title and takes a long time to fade. Then when it receives not finally completely gone it disappears very quickly and I can't extend the deadline.

  Help, please! Anyway!

  Do white in the title, use the pliers movement effects to move the shape on the screen, add a dissolution to fade out. Make the words in titles under a separate title and add it on track v3

  Here is an example of project in CC2014, could give you the general idea.

  Dropbox - title slide.prproj

• Cannot figure out how to "add-in" for the 2013 Outlook application... said the loading behavior is not loaded. How can I fix it?

  Cannot figure out how to "add-in" for the 2013 Outlook application... said the loading behavior is not loaded. How can I fix it?

  Hi amandab9126792,

  2013 Outlook does not work with Acrobat X because they are not compatible. Please check the compatibility to https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html.

  Kind regards

  Nicos