Cannot find record option in the Panel adjustment layer (CC 2014)

Similar Questions

• Satellite P100-286: cannot change "Customization" options in the Panel

  Toshiba Satellite P100-286

  Hello guys!

  Can someone help to solve my problem? For some time, I am not able to change/enter in ma, for example: screensaver of personalization in Control Panel. I can use only 2 of 7 available in "Customization" options/links Could someone help me, please?

  "Customization" isn't the only one of all the icons I can't come. There is a bit more such as: keyboard, Mail, regional and Language Options etc. Looks like the links to each of them does not work for me! :(

  I don't want to go through reinstalling Windows Vista so any help to solve this problem will be greatly appreciated!

  Thank you very much!

  Krzysztof (Chris)

  PS. one last thing, I tried to restore my system to the previous point, but I'm not able to do.

  Hello

  It is very strange to believe me, it's not easy to say why it happened and, therefore, we must study a little bit
  Did you install third-party applications on your laptop that could have a negative influence on the operating system?
  Have you changed the rights of account user or something like that?
  How about Antivirus applications? Always update you this software? Maybe it s a kind of virus

• Cannot find sharing option in the music app.

  I turned on homeshaing on PC and on the IPad, which currently use ISO9

  nothing seems to work?

  You the active in the settings > music > home sharing?

• Try to install XBOX controller in Vista, error message "cannot find a volume for the extraction of the file. Please check that you have permissions required"

  When I try to download my xbox controller, it says cannot find a volume for the extraction of the file. Please make sure you have the required permissions. What - what this means and how I can solve it?

  * original title - cannot find a volume for the extraction of the file. Please make sure you have the required permissions. What this means and how I can solve it? *

  Hi pamelagreen,

  Be sure that you install the software as an administrator.  Right-click on the file and you should see the menu option here.  Also, make sure you have the correct software:

  http://www.Microsoft.com/hardware/windowsvista/support.mspx

  I hope this helps!

• I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Cannot find a process with the name 'perl '.

  Hey all,.

  Tryign to configure the script in my dev environment and I receive the email ok, but does not get the report attached to the email... Here are the keys error I get with executing the script on the computer Windows 7 using PowerCLI 5.0... Thoughts?

  ___________________________________________________________________________

  Get-Process: cannot find a process with the name 'perl '. Process audit na
  me and call the cmdlet again.
  C:\scripts\report.ps1:3 char: 18
  + $pp = get-process < < < < perl
  + CategoryInfo: ObjectNotFound: (perl:String) [Get-Process], Pro
  cessCommandException
  + FullyQualifiedErrorId: NoProcessFoundForGivenName, Microsoft.PowerShell.
  Commands.GetProcessCommand

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:4 tank: 16
  + $pp.waitforexit < < < <)
  + CategoryInfo: InvalidOperation: (waitforexit:String)], Runti
  meException
  + FullyQualifiedErrorId: InvokeMethodOnNull

  New-Object: Exception calling ".ctor' with '1' or the arguments:"Could not find fi.
  the "C:\scripts\vmware_health_check20110912.html". »
  C:\scripts\report.ps1:8 char: 18
  + $att = new-object < < < < Net.Mail.Attachment ($file)
  + CategoryInfo: InvalidOperation: (:)) [New-Object], MethodInvoca)
  tionException
  + FullyQualifiedErrorId: ConstructorInvokedThrowException, Microsoft.Power
  Shell.Commands.NewObjectCommand

  Exception by calling 'Add' with '1' arguments: "value cannot be null."
  ' Parameter name: agenda.
  C:\scripts\report.ps1:14 char: 21
  + $msg. Attachments.Add < < < < ($att)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:16 char: 13
  + $att. Have < < < <)
  + CategoryInfo: InvalidOperation: (available: String) [], RuntimeEx
  reception
  + FullyQualifiedErrorId: InvokeMethodOnNull

  Remove-Item: can not find the path "C:\scripts\vmware_health_check20110912.html" be
  cause, that there is not.
  C:\scripts\report.ps1:17 tank: 12
  + Remove-Item < < < < C:\scripts\vmware_health_check$dt.html
  + CategoryInfo: ObjectNotFound: (C:\scripts\vmwa...ck20110912.ht
  ml:String) [Remove-Item], ItemNotFoundException
  + FullyQualifiedErrorId: PathNotFound, Microsoft.PowerShell.Commands.Remov
  eItemCommand

  The script uses the Perl API and not the PowerShell.  So the last SDK Perl install and be sure that your backup script as *.pl rather than *.ps1

  Concerning
  Joerg

• How do 'Video on layer' to the new adjustment layer IT as default.

  How do 'Video on layer' to the new adjustment layer IT as default.

  Thank you

  What version of photoshop are you using?

  In recent versions, you can go to window > adjustments and click on the Clip to layer and this should be the default value after that.

  

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Scan to computer option removed the Panel controls after update?

  Hello

  Normally, you can choose the option to scan a document in the Panel, and then you have another screen where contrast you where able to choose the DPI...

  But, as you can see, now after an update, the option "Analyze a document" is part...

  I can still ride to scan to the right of the printer, but I can't work with the contrast and other things, which is neccesairly for me.

  So, if someone could tell me why it was deleted, or where I can find the options again?

  Thanks in advance

  Useful info
  Photosmart HP 5510

  Windows 7 64 bit

  

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Photosmart 5510 and click on Uninstall.

   

  2. then go to Control Panel > programs and features

  • Photosmart 5510 -click and then click on Uninstall option
  • 

  3. then download the software on the HP web:

  •  Photosmart HP 5510 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• I can't see my master pages in the pages Panel and according to the options in the Panel, they appear...

  Hello world

  I work in a large InDesign file that I just sent to our translator who has adapted in the file itself.
  I just saw that he made a mistake in the masterpages, but I can't seem to access my masterpages more. According to the Panel options, they must appear on the top in the pages Panel, but they are not...
  Does anyone have a solution?

  Thank you

  Anne

  I did an exploration of the possibilities, and I can't find a situation where access to the part of Master Pages from the Pages panel is completely lost. The separator between sections of pages, Master Pages and document is drag-able, but even by slide it upwards or downwards is not completely hide the masters... at least in my control panel.

  So, the strangeness you encounter is exactly the kind of strangeness that lightens in general with a reset of the preferences. This at least is the first thing you should try if you have not already.

  Troubleshooting 101: Replace or 'trash' to your InDesign preferences

• 5.5: unable to select Tools or options in the panels

  Just installed Indesign 5.5 (after years of use of the previous versions, but still an 'intermediate' user). All panels (Pages, layers, races, etc.) will be open, but they are useless. For example, I can not add a new page, the master page layer, etc. The options are ineffective. Cannot select anything in the panels.

  It's the same thing with new documents and those previously created in Indesign 5.

  Thanks fror any advice you may have.

  Windows 7, maybe? See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• "windows cannot find a driver" in the installation package?

  We have a file server and print XP on our network that has a printer Series PCL LaserJet 3330 installed 5th (using the original installation CD and prints from the XP Server). While trying to install the printer on a remote computer, I downloaded the driver package Windows 7 64 bit for the printer on the computer remote and got the error: «Windows cannot find a driver...» "(I don't understand why the pilot was not as it should be in the installation package.) After getting this error - several times, including the re - download the package and re - try - I downloaded the XP Server installation package and I changed the printer driver it as a package to install downloaded for XP. We always get the same error. The installation of the printer worked fine before having to redo our BONES. Anyone know this problem and can help with this?

  This issue is between 64 bit and 32 bit, and there is an easy solution. Once you get back to the way it was before you downloaded the 64-bit package that you go to the machine that you want to load the printer and the printer as a local printer using load say lpt1 port. Auto not detect or print a test page and just finished the installation. Now on the windows 7 computer to join devices and printers and right click on the printer icon and scroll the properties first and left click. Go to the ports, and then add the port and in the box that comes up to put in the name of printserver and the share name of the printer by using the syntax \\printserver\sharename how save and apply and this computer will now be able to print to the printer.

• Cannot find initialization code for the ESW switches files.

  ESW 500 Series firmware 2.1.16 version requires Boot version 1.0.0.7 for 8 ports ESW models and version 1.0.0.4 start-up for models 24 or 48 ports, you may be to install or upgrade the startup code to ensure that the appropriate versions are used manually.

  To download the firmware and code files for ESW startup switches, go to www.cisco.com/go/esw500help, click on the " resources " tab, then click the link Firmware. Need a Cisco.com login.

  Cannot find the boot code to the listed ADDRESS.

  Hi Brian,.

  I followed the link you mentioned and selected the firmware and searched around and found the startup code.

  See my screenshot below.

  Best regards, Dave

  

• Cannot find my programs from the creative cloud on my mac

  I can't find my programs from the creative cloud on my mac. When I search, they are not. But I can open some of them through the icons in the dock. Unfortunately, not all programs have an icon in my dock. The program that I need right now for example, I can not open because it is not in the dock.

  You can try to hold down the command key clicking and now on the icon in the dock and under "options" select "show in Finder". This will show you where one of your Adobe applications. The others will be perhaps in the same place?