Satellite P100-286: cannot change "Customization" options in the Panel

Similar Questions

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Cannot find record option in the Panel adjustment layer (CC 2014)

  I can not find if anyone can help?

  

  According to this thread, presets has never been an option in the color balance. You may need to save it in a script or action.

  Re: Cannot save the color balance of the predefined... why?

• Re: Satellite Pro A120: cannot select an option on the recovery disk

  Hello

  I have a Toshiba Satellite Pro A120, which has recently been faced with the "alert: System protection failure! "password:" problem that it turned up on some BIOS password unknown on its own in the middle of normal operation.

  I got that fixed local Toshiba ASP.
  But now, when I was about to reinstall the Windows cos she had slow, the possibility that the recovery media normally give to just format the first partition become invalid.

  In the settings dialog box, the option is always there but it cannot be selected by clicking on it (from the color of the background showing this option not valid currently)... which means that the only selection (selected by default) is format all of the 38 GB... I don't want to do.

  Someone knows what is wrong and how can I solve this problem.

  I assume that you are using Windows XP and the restore CD also contains the XP operating system.
  It s also interesting if this option has worked in the past?  :|

  However, it s really mysterious that the solution cannot be executed and unfortunately I do not know why it happened

  In the worst case, you'll have to back up data from the HARD drive and format the whole HARD drive :(

• Satellite P100-286: is it possible to use the HD DVD-ROM?

  Is it possible to replace the Standard DVD with an HD DVD-ROM?

  Hello

  It is certainly bound to material compatibility and I think that for the moment there is no precise information on this subject. HD-DVD player, you can find in a single model laptop and I really don t think you can buy it as one material part.

  Generally compatible expectations contained in s operating manuals. By the way: have you ever found a HD-DVD for sale in the unique setting of material? How much does it cost?

• Satellite P100-286 - video RAM shared with RAM system

  Hello

  First note that I m French sorry for the bad English, I can use.

  I have a satellite P100-286 - PSPAGE (T7200 @ 2 GHz, 2 GB DDR2, Gef7900GS) and I noticed that some of the RAM (exactly 271MB) was reserved for the graphics card.

  I think that the graphics card has enough memory with its 512 MB, so I don't want to have a part of my RAM to be reserved for the Geforce. I have not found the way to reassign this small part of the system in the bios, and it is independent of the OS (I use Vista and debian and I see the booking even on memtest86) so I ve tried to flash with the latest BIOS but no change.

  Is there a way to 'recover' my memory?

  Thank you

  Additional question for fans of Linux: why can not I get sound on my laptop running Linux? :'(
  It seems that there is no error, but there is no sound even if the sound card, the "HDA Intel", seems to work perfectly, even with the latest updates of the kernel and alsa.
  I tried several Linux distributions, including Suse and Mandriva.

  Hello
  Unfortunately you can not affect the amount of memory shared by yourself since it is regulated by the BIOS/Chipset and depends on the amount of main memory that is installed.

  As far as I know that the shared memory is allocated flexible, which means that if a graphical application needs a graphics memory more then the system returns to the 271 MB shared memory. That's what I know of my machine... but I don't know, it might be different on other models.

  Otherwise I have no information on this shared memory thing. You can also see this article: http://en.wikipedia.org/wiki/Shared_Memory_Architecture

  See you soon

• "Plugged in, not charging" Satellite P100-286

  Hey people, well I've been having this problem just now, I have a Satellite P100-286, OS: Windows Vista Home Premium and my problem is that after I m using my laptop for a little while on the current if I am it loads, it will stop charging and if I hover over the battery icon n the taskbar It will say "Plugged In no current charging" and the battery life will not be 100%.

  I also note that in this case, the light of battery on my laptop is not blue indicating the battery is full (of course), but neither is it orange indicating that he is in charge, but a few times I noticed that the light flashes when this happens not all the time. I played games with the power adapter plugged in and sometimes the laptop is off and when I turn it back on and "resume windows" warning message will appear saying 1% etc.

  Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

  I KNOW there are a LOT to READ IM SORRY... hehe... BUT PLEASE HELP: p

  > Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

  You should know that it is not easy to provide an exactly fault diagnosis without putting his hands on her.
  What we can do is to provide some sort of suggestions

  So I think it could be a faulty battery, so first the battery should be checked.
  If problems still persist, then electronic power supply failure might be possible

  However, the equipment should be checked and this can be done by an ASP in your country
  It would be desirable to communicate with these guys and ask for help

  Good bye

• Upgrading RAM on Satellite P100-286

  Hello, I'm looking to upgrade the RAM on my laptop Toshiba Satellite P100-286. I did some research but have resulted in conflicting reports.
  RAM DDR2 RAM right or is it So DIMM DDR2 RAM? According to the Toshiba site, it is not, but when I go to one of the sites Web "Upgrade your Ram" and enter my brand and model, he suggested the So-Dimm type...

  I'm looking for a little clarification. Thank you.

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com .broadvision decided .do w = Yes & PRODUCT_ID = 125204

  See this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28328&ft=m&St=3

  You will find details on the compatible RAM modules:
  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Of course, you could choose another manufacturer like Kingston but I m using Kingston modules in my other laptop and it s ok.

• Satellite P100-286 - charge not completely even in stop...

  Hey all,.

  I have a Toshiba Satellite P100-286 and my problem is that when it s on and I plugged it load the light orange will be on indicating that the load and it will say connected load, but the battery life does not exceed 96%, yesterday he wouldn t go above 97%, and once again on the eve of 98% (lol) , the thing is when I have the laptop off and have supported (the witness orange still on indicate its charging) it will not load fully. When I turn on my laptop it is always 1% less than it was the last time I got it on as you can see by whats described above... I'm sorry for the long post, it of just quite difficult to explain.

  So can someone please help? Is it my battery what should replace is exhausting? Or is it something to do with the BIOS?
  Please help, thank you in advance for any response.

  Hello

  When the laptop is ON try to remove the battery and after a minute or two inside put once again. Please let me know what happens after that.
  To be honest, it is not easy to say why this happens exactly. I don't think THAT BIOS is responsible for this.

  Have you used the battery power intensively or your laptop worked mainly on feeding current?

• Satellite P100-286: Explorer no longer responds when leaving hybernation

  I have re-installed Vista from disk Toshiba supplied with the cleaning machine, gone through the process of updating, that is microsoft and Toshiba updates and drivers.

  I have searched data base Microsoft on the errors of Hybernation for Vista, most are to do with the USB, but without coming through what im getting.

  My problem is that if you come from hybernation explore stops responding and does not recover.
  I have tried to restart Explorer by the Task Manager but still don't get the desktop or allow me to stop in the correct Manor.

  Regarding loans Vista boot USB that I use, which stuck ok to use it in vista, activate or disable the always the same problem.

  Do you have ideas about how this can be fixed.

  Based Satellite P100-286, but with 4gig of RAM

  I presume, after reboot, you can use new IE. Am I right about that?

• Can I use 2.1 speakers on my Satellite P100-286

  Can I use some 2.1 speakers on my computer toshiba laptop?

  supported audio formats: 16 bit stereo
  supported audio standards: MIDI support
  speakers: Harman Kardon stereo speakers
  Manufacturer: Toshiba Bass Enhanced Sound System with SRS TruSurround XT technology

  I don't see any reason why you shouldn't be able to use the 2.1 speakers on your Satellite P100-286.

• How to get 5.1 sound on Satellite P100-286

  I had to replace my old P100-347 of 2 months, because of cracks on the hinge. The only model they had available was the P100-286. It is almost identical, except one thing, that I was not informed until I got it home and so too late to resume.

  Basically, the P100-347 had a SPDIF port and the 286 (as far as I can see), does not work. So, what I want to know is, what kind of sound that I am able to get the decision-making helmet.

  I plugged my Dolby Digital amp, and everything seems to be able to get is 2 audio channels, when I would be able to get 5.1 channels... In fact, I would like to have SPDIF, but don't think it will happen.

  Can someone advise and give me some advice on solving this.

  Thanks in advance
  Steve

  On the Satellite P100-286 S/PDIF port is not available and if you want to have 5.1 surround sound you need to use an external solution connected to the USB port. Google around. You will find quite different products, that you can use with your laptop.

• Satellite P100-286 - vertical on the screen restart and constant lines

  I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started to freeze options even with vertical lines on the screen tried recovery cd tried to re - install and after installation, that he started to do the same. I have read similar problems in the forum and this is a common problem with Toshiba? I have spend £1500 on this and it is only 3 years old. My friends have older laptops of this almost 6 years old and in good working condition.
  Y at - it a suggestion for this problem or a solution? The heat on the basis of the laptop is really hot and it's like that for centuries.

  Any help is really appreciated after spending so much like to last longer or it is a problem of reliability with the Toshiba brand.

  Hi vns.

  Hmm strange. I have ever read on these issues here in the forum with Satellite P100. Friend of me has the same model and it s still does work correctly, no problems at all.

  Do you have the same vertical lines on a screen? If so, it is certainly associated with the internal graphics card and not watch.
  By the way: you have the same problem in the BIOS or just Windows?

  With regard to the heat on the underside: I think that it s time to clean it and remove dust. You can do this using the jet of compressed air to blow the dust from the cooling fans. That's why it of not necessary to disassemble your laptop.

• Satellite P100-286 - upgrade to 4 GB of RAM but BIOS only reports 3 GB of RAM

  Hello, I would like to know if someone can help me...!

  I have a portable P100-286 Toshiba with the following specifications:

  Processor Intel Core 2 Duo processor T7200 - 2 x 2 GHz processor
  2 GB RAM (2 x 1048)
  NVIDIAÃ? GeForce Go 7900 (memory: 512 MB)
  Vista Home Premium 32-bit

  Full specifications here:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & highlightOption = 63188 & com decided .new = Yes .broadvision & PRODUCT_ID = 125204 #0

  According to this specification, the laptop can handle up to 4 GB of RAM:

  "Memory system: standard: 2 048 (1, 024 + 1, 024) MB, maximum of extension: 4 096 Mo, technology: DDR2 (533 MHz) RAM.

  I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem.

  However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.

  Can someone give me some ideas as to what I can do to the BIOS then it recognizes all the 4 GB of RAM?

  Thank you very much!

  Post edited by: [email protected]_UK

  > I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem

  You're not 100% good. The 32-bit Windows OS cannot use the entire 4 GB due to the limitation of the 32-bit operating system. After the installation of Vista SP1 will display full 4GB but it will still use only 3 GB.
  To use all of the 4 GB, different components like CPU, BIOS, OS and chipset must support this. If one of these doesn't support 4GB while the laptop components will use only 3 GB.

  > However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.
  Update the BIOS

  People are right. The update of the BIOS must help to recognize the 4 GB in the BIOS.
  But it s also good that the update of the BIOS is risky.
  If you want to use a bad BIOS or bad procedure to update the BIOS that can damage the ROM. module

  Good bye