Cannot get audio mic in PP CS5.5

Similar Questions

• cannot get audio in the timeline to another video

  cannot get audio in the timeline to another video

  

• Cannot get audio on PSE6 slideshow.  Audio available on other applications.

  Cannot get audio on PSE6 slideshow. Audio available on the other app

  The music files that have additional data added to them by a music management software (for example, added by iTunes album art), sometimes does not read. To use these files, create a copy of the audio file, delete the album art data and then use that file in the slide show.

  Thank you

  Catherine

• Cannot get audio recording

  When I try and save a screen cast, I get no audio - I get a warning 'Adobe Captivate must establish the audio and record levels of sensitivity to create the best audio quality possible. Want to continue his tests of noise levels?
  I click Yes, nothing happens.
  I click on the Red record button again and it starts recording, but I have no sound.
  
  I am running Vista x 64. Captivate 4 generation 1596 with the updated the size 536 K NSAudio.dll (which was mentioned in another post on the forum, but does not solve my problem.
  
  In my Audio settings screen, there is a button "calibrate audio '-clicking on it does nothing.
  Help, please!
  
  My audio device is a M-Audio sound card, which is displayed in the drop down as a source.
  
  
  

  Hey there Joe

  I hope that the nsaudio.dll trick will work for BasementJack.

  However, there is other information that might be relevant also. I had terrible audio problems myself and the hokey-pokey nsaudio.dll does not solve my own questions. What finally solve was to follow what is described in the below blog post.

  Click here to read the blog post

  See you soon... Rick

• Cannot get audio or speaker to work taking

  Had to "Refresh" not restore my computer lost more additional applications.  Assumes that the data is still there, but in some applications too fragmented to use.  I can hardly keep anything on my computer today so...   However the audio speakers will not stop restraining themselves and I can't use my headphones or a loudspeaker junky to listen to audio books, that I had downloaded.  Had to reload the audio books, but now they are weak.  It is a question of fact.  Will msn never install windows7 on a windows 8 for a consumer?  Updates of windows8 kept disconnect me my dsl and so I had to 'restore' my computer 4 times before you have to use the option refresh FORMIDABLE.  Would never want another update, but I would use my speaker and headphones.  Thanks for any input.

  Hi, Michaela,.

  I imagine the inconvenience that you are experiencing.

  What is the brand and model of the computer?

  This problem may be caused due to bad/corrupt audio driver. A damaged, obsolete or incompatible driver can disrupt communication between the PC and the sound card.

  Method 1:

  Configure audio settings by following these steps:

  Right-click on the Volume icon in the Notification area. Choose devices to record or playback devices. In this window that appears with the right button on the devices listed as well as on a box empty to show more devices (devices disabled, etc.) and see the options available for configuring your sound.

  Method 2:

  Follow the steps in the Microsoft KB article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Cannot play video on Youtube, but I get audio. do not have this problem with other sites

  Window xp
  high-speed internet connection
  run firefox 3.6.15.
  Shockwave flash is updated 10.2.152.32

  When it is on youtube, the video does not play. just a black screen, even if the progress bar at the bottom seems to reproduce. I GET AUDIO. I don't seem to have this problem on other sites.

  does not crash, do not see the error messages.

  Could not disable hardware acceleration in Flash Player.

  See the videos in Flash will not play in full screen

  • http://www.YouTube.com/swf_test.html (right click on the player: settings)

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Split audio track in first CS5

  Hi all

  I'm getting acclimated to work in CS5 first, after years of editing on Avid Media Composer and Symphony.  There are, of course, similarities and differences, that which some I can understand my way through and others where I'll need to ask for help.  Here is one.

  Suppose I have a piece of video that got killed by split tracks.  On channel 1, we have the Lavaliere microphone worn by an object of the interview.  On channel 2, we have the microphone on the device so when searching, I can hear the interviewer's questions which are not audible in mic of the interviewed.  In the final cut, I would throw channel 2 and channel 1 centre-pan.  On an Avid audio channels are separated on the timeline - tracks, you can literally remove channel 1 or audio clip from channel 2 and then use a Pan tool to take the audio clip remaining and pan it as desired (Center-pan is typically what you want with an interviewee, but actually you have infinite choice between left and right full).

  How do we address this question in the first?  I'm sure that this issue has been addressed before, but after much research, I guess that I don't know the correct search terms to find.

  Thanks in advance for any ideas.

  Peter

  Personally, I don't like the filling to left/right effects - it's unnecessary treatment, and I think that their use is somewhat restrictive. They would be your best option if you have already completed edition, however.

  If you have not started to edit, you can remap the channels left and right stereo audio to two mono channels split, so to replicate your experience in Avid (it's where I came from, too). Choose your clips in the tray and right-click > edit > Audio channels. Click on the option "Mono" button to send the stereo, left channel right at A2 A1 and the stereo. Now you can edit clips in two mono tracks in a sequence.

  The difference is the way that first card tracks default sequence. Avid, odd numbered audio tracks have left, in pairs of audio tracks went right. First, all mono audio tracks by default for center channel if you use one track stereo master. In the Audio Mixer Panel, you can pan tracks left or right to go to the specific output channel, or mix according to the needs. This practice is somewhat different than Avid, but gives you great flexibility.

  The thing most important to note is that the Audio channel mapping does not work if you have already used your clip in a sequence, so don't forget to do that immediately after the capture/import your clips.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.

• Cannot get my Realtek HD microphone for computer XP

  Original title: Microphone problems

  I can't get my mic to work.  XP SP3 HD Realtek. Advanced tab in Audio input is grayed out.  Have tried to reinstall the soundcard by removal of the device and then Manager looking for new hardware.

  Make sure that the right software is installed from realtek, you also.

  disable the audio device that is embedded in the BIOS...

• Cannot burn Audio or data by using Windows Media Player CD

  Cannot burn Audio or data on Media Player get an ERROR!

  Very well, I was burning cd I burned a couple and a third, I put the disc in and it showed that it is in their. I did my burn list and clicked on start to burn. He acted as if she was going to burn. It is on the first track for a minute or two then came red of lil DEPISTENT what ERROR which track this continues through all the tracks. I've ruined several discs. I tried to reduce the speed of combustion and that did not help at all. I also have problems with getting the DVD to read. Read some DVD movies and some will not. I did Diagnostics on the burner itself and it keeps coming back that it works correctly and everything goes well with the material itself. Please someone help me.

  Hi Leynak,
   
  1. What is the exact error message you get?
  2. don't you make changes before the show?
  3. when exactly the burn process stops?
   
  If the song is playing, but the burn process continues to stop when inspecting the song, try turning off the upgrade of the volume:
  1. click on the arrow below the burn tab, and then click More Options.
  2. turn off the volume apply upgrade across tracks on the CD check box and then click OK.
  3. try burning the CD again.
   
  Visit this link for more information: burn a CD or DVD in
  Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player
  Also check if Windows burn engine burns the disc without any problems. Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• How do you get the mic to work in a headset in live-chat win7?

  IM using win7-chat live with a headset. I can hear, but cannot speak. Im a gamer on STEAM and I would like to be able to speak in the game. I got all works under XP, but can't get the mic feature in win7.  Do I need a separate TS 3 program to run the games? My computer is telling me that my system devices are all functional.

  TY,

  JB

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• Why do I only get audio when exporting?

  I created a photo slideshow with audio clips of video as well as a piece of background music.  I followed the steps in the tutorials of cc PR and exported exactly as they show.  But I only get audio... There is no video.  After hitting 'File - Export', I have both audio and video boxes checked, but get no video.

  > new to the world of Adobe

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 can help