Cannot get Bluetooth to the does job - no icon "Bluetooth RF Comm.

Similar Questions

• cannot get rid of the print job on hp 7520

  I have a HP 7520 connected by network on my laptop with Windows 7. I printed work that has erased the queue on my laptop, but got an error on the printer and, now, no matter what I do (stop the printer, unplug unit), he continues to start this work again and again and each time it boots. I also deleted the printer devices and readded it. I stopped the spooler and rebooted. What can I do to get rid of him?

  Hello Cosima,

  I understand your frustration and appreciate all the troubleshooting that you did on your own with no success. I can't see when you print on your HP Photosmart 7520 continues to print again and again.

  First of all I would like to restart you your network, follow the steps below:

  1 perform a reset: reset of the printer (leave turned off unless it is turned on by itself)

  2. restart your router (leave off the power)

  3. restart the computer (leave off the power)

  4. turn on the router, the printer and the computer in that order.

  I would like to continue you here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Let me know the results, I'll look for the answer.

  Thank you

• Cannot get rid of the BIOS password

  Bought an ACER Aspire E1 from an EBAY of ACER store about a year ago. A few weeks ago, I started it and quickly received a BIOS PASSWORD entry. Since that time, the laptop was absolutely worthless. I guess I tried the hardware, software, battery and all I could think of to fix the problem. I tried the MICROSOFT forums. ACER, ASK.COM Forums and forums Forums, forums, forrums and other forums that I could think of to try to resolve the unknown BIOS password. Thanks UEFI.

  I guess short of replacement of the EEPROM on the motherboard (don't think even that would help) which I'd be suspicious to do.

  Cannot get rid of the BIOS password.

  If I contact the ACER Support, they say that it's a hardware problem. I tried (as suggested by ACER support), bringing to STAPLES, BESTBUY, FRYS ELECTRONICS, OFFICE MAX, DATA DOCTORS, and several other 'Repair computer facilities' nothing works.

  IN a WORD, it's a PIECE OF a $400 trash...

  If anyone has any ideas on how to reslove this issue, send me an E-mail, fax, text. or post a reply...

  Thanks for letting me the WIND...

  WMARSH...

  can you post the exact model E1?

  E1 - xxx

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• cannot get audio in the timeline to another video

  cannot get audio in the timeline to another video

  

• CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  

• Satellite L300 - 22 X - cannot get Bluetooth to work

  I got the L300 22 x last week, it says on the box and told me at the time, it comes with bluetooth, but I can't make it work please help!

  on the front of the laptop, there is a wireless switch, which I turned on it lights like orange, but my phone does not find it and when I go into the control panel to try locat any info on the bluetooth is not here to select. I'm starting to wonder if it is installed or not, but why he would say it has bluetooth on the box, if it is not. If anyone knows the answer please help. model nu PSLB8E-0PS007EN.

  Thank you

  Joanna

  Hello

  You will never get Bluetooth works on Satellite L300 - 22 X because it s not equipped with Bluetooth. I put t know who told you this information, but it s wrong.
  A friend told Satellite L300 it s not equipped with Bluetooth too.

  But it uses an external USB Bluetooth dongle which bought in a store of the computer. It wasn't expensive t, but he can use Bluetooth! :)

  Perhaps this is an option for you

• Smartphones from blackBerry Desktop Manager "disconnected" and I cannot get rid of the error message

  I just bought a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from the site Web of Blackberry. When I run the Desktop Manager I get this message: "Before you start, check that your current BlackBerry device is connected to your computer." Troubleshooting functions I've seen on this forum: many tips (ones I've tried is below). One in particular, that I can't do is "Office Manager shows"off". ".
  -Make sure that the user has entered in the Desktop Manager and select options > connection settings > detect. »

  ... because I can't get rid of the error message dialoge box, and I can't click on the menu options in the BB Desktop Manager.

  I tried the following:

  • uninstalled and reinstalled twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
  • installs the cable to the USB port at the back (after having tried both ports at the front) of the computer
  • rebooted the computer several times
  • hard starts the phone by removing the battery
  • plugged in, removed and replugged in the phone.

  Also:

  • The phone is properly install when I plug it in, but the software still does not seem to see it.
  • In Device Manager, the BlackBerry appears under portable devices. Double clicking on it gives me the message "this device is working properly." of reassurring.
  • The Com1 port is working properly, according to Device Manager.
  • A double-click on the icon of the Device Manager to get the properties indicates that the Com1 port is "disconnected" - when I try to set it up, it appears just back to the disconnected state.

  If someone has an idea or something that I have not tried, I'd be happy of course!

  Thank you!

  K

  

  

  Good, people, after a phone call from 3 1/2 hour with a (very patient) phone support person to Blackberry, here's what I learned.

  You can check your drivers USB in this way:

  1. Plug your phone into your USB key. Assuming that your Blackberry is "seen" by your computer...
  2. Go into the Device Manager on your computer (Panel)
  3. Expand the Universal Serial Bus controllers at the bottom of the list item
  4. Right-click on the BlackBerry smartphone, and then select Properties
  5. Click on the driver tab
  6. Click the driver Details button
  7. You should see a driver. I saw two. The one like the BlackBerry is the RimUsb one.

  So here's what NOT to do: we threw any driver who has been the "extra". This actually made using my mouse and keyboard cannot, because they are USB and my poor husband has sent in the basement to find a million-year-old keyboard (and mouse) with the old fashioned type of connectors (PS2). Bleh. Don't, don't.

  Here's what I did that worked (not saything this will work for you - it changes the registry to a backup system with this backup and restore if you are nervous about this kind of thing):

  1. On the start menu, choose run and type regedit into the registry editor.
  2. Follow this path to the file: HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, computer, class
  3. Click: {36FCE60-C465-11CF-8056-4445535400000}
  4. If there is an article called law "UpperFilters", delete it. (See photos)

  Hope this helps someone.

  Karin

  First photo: Watch 'before '.

  

  Second picture: displays the full path of the file and 'after '.

  

• Cannot get SW1 to the second network of ping and can't get the HQ router to ping SW1.

  Hello the forum community.  I am new to Cisco Configuration and cannot understand why, in the attached packet tracer file, I can't have my SW! switch to ping to the gi0/1 interface of the branch office router and beyond.  I also can't understand why I can ping to the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 and beyond.

  Ideally, I'm trying to configure the network so that PC1 can ping 172.16.1.100, which is a loopback on router HQ.  I ping the closure of the branch office router, but not the switch SW1.  I cannot ping the gi0/1 interface on the router of the branch of the SW1 switch and do not understand why.  I can also ping the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 of the HQ router.

  PC1 - 10.1.1.100 255.255.255.0

  SW1 - VLAN 1 - 10.1.1.11

  Branch gi0/0 - 10.1.1.1 255.255.255.0, gi0/1 - dhcp assigned as 209.165.201.1 255.255.255.224, dynamic NAT activated with access-list 1 (permit 10.1.1.0 0.0.0.255), the pool name is NAT_POOL with the address range of 209.165.201.5 - 10 255.255.255.224 as NAT address range.  I can see it working with debug ip nat active when I ping the router address 10.1.1.1 HQ, although I have test the ping without NAT and it is always successful.  Gi0/0 inside the nat, g0/1 outside the NAT.

  HQ gi0/0 - 209.165.201.2 255.255.255.224, dhcp server enabled to provide an address for the router in branch gi0/1.  I had to add a static ip route 10.1.1.0 0.0.0.255 209.165.201.1 in order to be able to get the ping to the router HQ to branch router gi0/0 to work.  Don't know if there is a better way to do it, but it's the only way I could make it work so far.

  You will need to rename the .txt file, attached to. pkt.

  Thanks for any help!

  Hello

  The switch has ip routing enabled, if so disable it and give it a default gateway instead

  no ip Routing
  IP default-gateway x.x.x.x

  RES

  Paul

• Cannot get rid of the empty Capture window

  I've been video capture from VHS tapes to a VCR by a Canopus ADVC-55 analog-to-digital converter.  I use Windows 7.  It worked OK, but at one point, first Elements 9 froze when taking and I aborted it via Task Manager.  When I reopened it PE9 a capture window empty blocking work area appeared (see Figure).  The window cannot be closed or moved, but can be resized.

  I have made several attempts to get rid of him.

  -J' started another video capture, which opened a new capture window without getting rid of it empty.

  -Starting a new project doesn't have a window.

  -J' uninstalled and reinstalled PE9.  The empty window always opens when I start the program!

  The program is still usable by resizing the window to small so large that I can access the controls, but I would appreciate any advice to get rid of the stupid thing.

  

  Welcome to the forum.

  It's a new one on me.

  First thing I would do would be go to the fenΩtre > reset the workspace and we hope that it clears.

  Hope that helps and good luck,

  Hunt

• Classroom in a book - CS4 - Lesson 6 - cannot get rid of the noise

  I'm on Lesson 6 version CS4 classroom in a book. I worked on the image with the mother and child, but I can't seem to get rid of the noise in the mountains and the sky. They look very grainy. I've followed all the steps exactly and even went through screen shots to see if any setting have been changed which may not have been mentioned. I compared my version to the version 'End' and they seem very different. The mountains and the look of the sky much better in the "End" version, although the mother and child look more exposed. On mine, the people look much more sharp, but the noise in the mountains is terrible and the sky is also quite grainy.  I redid this part of the lesson about 6 times, four times on my PC and twice on a MAC, but the results are always the same.  The sharpness which lesson you do at the end, while improving certain parts, the granulation in the worst of the sky and the mountains.

  This has been very frustrating.  Clearly something more was done with the image of 'End', which was not in the lesson.  Even if people, in my opinion, look better in my finished version, the mountains and the sky look terrible, and the background was the entire point of the lesson. Does anyone have ideas, what has been done to make the smooth background to the image of 'end '?

  I dug my copy of PS CS4 classroom in a book and went through the same lesson to see what results I got.  I can confirm that the noise reduction is not optimal.  See the example in the picture 'after ':

  

  Compare with the results of a 3rd party plugin noise reduction (in this case Topaz Denoise) using a standard preset:

  

  This version needs a bit of sharpening is to the people.

  In doing this exercise that I was reminded why I dislike the Classroom in a Book series.  It makes you go through the steps like a zombie, tell you what value to enter in each field, but it does not often do the fields. Certainly, as a reader, you are free to experiment, but which do not encourage lessons. And the fact that the results do not always match the book and readers are disappointed when the results do not confirm my opinion that the book is not encourage experimentation.  Perhaps a further reduction of noise was made for each channel in the Advanced setting of section.as described in the box of Lesson 6.

• When I try to log on to hotmail, I get a message to update my browser, which I did, but cannot get rid of the message.

  I would like to know how to get rid of the message telling me to put my browser every time I try to log on to outlook. I've improved.

  Please read the sites say that Firefox is obsolete or incompatible, even if it's the latest version

  So read Firefox updated to the latest version to ensure that you're on Firefox 28.0

• box says "Do you use Yahoo toolbar on multiple computers" cannot get rid of the box. Do not accept the entry or nearby!

  The box has two buttons. They say 'save on my Yahoo! ID' the other said no thank you, "just save on this computer." I can press each button, but nothing seems to happen. The only way to get rid of the box is to close firefox. I use a HP s5713w-b and windows-7.
  I downloaded firefox with improvements to Yahoo.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• Cannot get rid of the horse of Troy BACK/Alureon.AB

  Try to find a way to get rid of the TrojanDOS/Alureon.AB AB version. Help someone?

  Suggest you run TDSS Killer http://www.bleepingcomputer.com/virus-removal/remove-tdss-tdl3-alureon-rootkit-using-tdsskiller

  And remember that you read this document carefully, including the stages of recovery which are discussed at the conclusion of the narrative

  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Trojan%3ADOS%2FAlureon.A

  Further details including the GreginMich response can be found in this thread: http://answers.microsoft.com/en-us/protect/forum/defender_offline-protect_scanning/unable-to-run-windows-defender-offline-after-found/e0b638c6-3ae3-421e-9a59-ad64028196aa