IPF in the non paged area error (applecharger.sys)

Similar Questions

• Gettings error message: error in the non paged area error page

  I have a Satellite M45-S265 with Windows XP. Even if I moved abroad and then went home, I haven't lost my recovery CD!

  However, my computer went to compensation under a policy of service from Best Buy. She returned with a new card, new keyboard, new drive hard (in white), new CD player and I don't know what to another new. I guess the 3rd global environment was pretty hard on this (dust, moisture, heat) so it takes a lot of new things.

  Now, when I use the recovery CD, it seems to do everything OK, until he asks me my settings. After settings, it tells me it will reboot and it does, and when she returns to the top he gets a blue screen with the error 'page in the non paged area failure. "

  Technical information of the blue screen:

  Stop: 0 x 00000050 (0xA9A35A00, 0 x 00000000, 0 x 00000000, 0x805C52BA)

  win29a51.sys address A9A35A00, at A9A35A00, date stamp 00000000

  When I restart, the windows looks like it will start up. Can I get a pretty little box of windows with the message "the system is not fully installed. Please run Setup again. »

  I wonder if the restore CD will not work because there is perhaps now another brand of hard drive on CD here, or different, different determinants?

  Best Buy has something wrong or I have to take the computer to them?

  Original internet research indicates the problem could be faulty RAM?

  What should I do?

  Thank you
  Susan

  Hi Susan,.

  Looks clearly like a related problem of RAM. I recommend to put the machine to a technician and allow it to check the RAM memory, because this fault of page errors occur when something was written into RAM and then if the operating system asks files block in the module memory may not be accessible which causes the above error.

  Greetings

• IPF in the non paged area, pdiport.sys

  Hi all

  I get this message every time I start my computer. Then it restarts and all right, but it is very irritating.

  He said: page fault in the area expanded, followed by a pdiport.sys

  any1 knows why I get this?

  I'm on windows pro 8.1 btw.

  The driver is the cause of the crash is the PdiPorts.sys:

  BUCKET_ID:PdiPorts+ 2350 AV_

  The process that crashes is the dthtml.exe

  The PdiPorts.sys, which is dated July 15, 2009, seems to be a driver of Portrait Displays:

  http://www.portrait.com/

  Here is some info on the dthtml.exe:

  http://www.file.NET/process/dthtml.exe.html

  Try to update or, if necessary, uninstall the software from Portrait Displays that can be associated with the Analyzer software.

• Satellite C850-1NU - BSOD with Page fault in non paged area error

  So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
  It said Page fault in nonpaged area.

  Some people say it means that the RAM could be faulty.
  Is this true and if it is faulty should I take it back to PC world where I bought it?

  Thanks ;)

  Hello

  The BSOD could be caused by system problems or malfunction of the equipment.

  .. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time

  But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.

• PAGE FAULT IN NON PAGED AREA and IRQL not less or equal

  I left my computer on overnight to come on this morning to find the blue screen of death saying IRQL not less or equal - I tried access through safe mode, but I get PAGE FAULT IN NON PAGED AREA. I tried and it was crossed by the last setting but I just got IRQL not less or equal - it's the next day, I quit a game on last night though.

  Edit: I can't quite

  Have you recently updated the video driver or a service update update it? Try restarting with the VGA driver or last known good configuration.

  Tom

• Windows 8 errors and Crash_ Page fault in non paged area + attempt to write a readonly database

  Hello

  I am running Windows 8 on my PC and have seen the Failure of Page in the nonpaged area error when starting and stopping down a few times.

  Recently, she was accompanied by an attempt to write a readonly database error starting up, which led to several auto-redémarre.

  Here is the link to download the Minidump files on my computer, if that would help.

  http://1drv.Ms/1nOJ8If

  Please guide me how to on this subject.

  Thanks in advance,

  Rohan

  Rohan

  These related to the 802.11 Wireless netr28x.sys adapt Driver Ralink Technology, Corp..  I would setup the possible latest driver even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\061814-23656 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff801 'f0c1b000 PsLoadedModuleList = 0xfffff801' f0ee7aa0
  The debugging session: Wed Jun 18 03:25:39.915 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:10.667
  Loading the kernel symbols
  ..

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  .............................................................
  ................................................................
  ...
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88003a1e000, 1, fffff8800529b442, 0}

  WARNING: Unable to verify timestamp for netr28x.sys
  ERROR: Module load completed but symbols can be loaded for netr28x.sys

  Could not read the name of the problem driver
  Probably caused by: netr28x.sys (netr28x + 3e442)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88003a1e000, memory referenced.
  Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
  Arg3: fffff8800529b442, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  DUMP_FILE_ATTRIBUTES: 0X8
  Generated Triage of the kernel image

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801f0f73168
  GetUlongFromAddress: cannot read fffff801f0f731f8
  fffff88003a1e000 non paged pool

  FAULTING_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff88000b89230-(.trap 0xfffff88000b89230)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff880039de000 rbx = 0000000000000000 rcx = 0000000000000282
  RDX = a 0000000 00000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff8800529b442 rsp = fffff88000b893c0 rbp = fffff88000b89540
  R8 = 0000000000000001 r9 = 0000000000000114 = 0000000000000000 r10
  R11 = fffff88000b89380 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  netr28x + 0x3e442:
  fffff880 ' 0529b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h ds:fffff880 ' 03a1e000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801f0d363e5 to fffff801f0c75440

  STACK_TEXT:
  fffff880 '00b 89048 fffff801' f0d363e5: 00000000'00000050 fffff880 '03a1e000 00000000 00000001' fffff880' 00b 89230: nt! KeBugCheckEx
  fffff880 '00b 89050 fffff801' f0cafb2b: 00000000 00000001 "fffff880 '03a1e000 fffffa80' 0730eb00 fffff8a0'00000001: nt! : FNODOBFM: 'string' + 0x33c2b
  "fffff880 '00b890f0 fffff801' f0c72eee: 00000000 ' 00000001 fffffa80 ' b 0, 200000 fffff880 '00b 89400 fffff880' 00b 89230: nt! MmAccessFault + 0x55b
  fffff880 '00b 89230 fffff880' 0529b 442: fffffa80'0 b 200000 fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff: nt! KiPageFault + 0x16e
  fffff880 '00b893c0 fffffa80' b 0, 200000: fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff 00000000' 00000000: netr28x + 0x3e442
  fffff880 '00b893c8 fffffa80' b 0, 200000: fffff880'00 b 89540 ffffffff'ffffffff 00000000 00000000' fffff880'05291007: 0xfffffa80'0 b 200000
  fffff880 '00b893d0 fffff880' 00b 89540: ffffffff'ffffffff 00000000 00000000' fffff880'05291007 00000000 00000000': 0xfffffa80'0 b 200000
  fffff880 '00b893d8 ffffffff' ffffffff: 00000000 00000000' fffff880'05291007 00000000 '00000000 00000000' 00000000: 0xfffff880'00 b 89540
  "fffff880'00b893e0 00000000' 00000000: fffff880 ' 05291007 00000000 '00000000 00000000' 00000000 fffffa80 ' b 0, 200000: 0xffffffff'ffffffff

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: netr28x + 3e442

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: netr28x

  Nom_image: netr28x.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 531982e8

  FAILURE_BUCKET_ID: AV_netr28x + 3e442

  BUCKET_ID: AV_netr28x + 3e442

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_netr28x + 3e442

  FAILURE_ID_HASH: {5c6cc3bb-48d3-d6cb-422b-45f5619bcc52}

  Follow-up: MachineOwner
  ---------

• Place the cursor on the non-transparent area

  Hello. Is it possible to change the State of a PNG image when plane only on non-transparent area in Adobe Muse?

  If I get that's OK, you want opacity change for a portion of the image with a certain part with opaque opacity?

  Unfortunately, we cannot achieve this using image fill, you can use fill gradient with opacity but different levels of opacity on the same image that the filling can be done.

  Thank you

  Sanjit

• blue screen error in windows server 2003 small business, failure of page in non paged area

  error on a blue screen in windows 2003 small business server, fault_ page_ zone not paged_

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Vista updates cause a blue screen (Page fault in non paged area, 0x00000000, 0x00000002, 0xe2249b56)

  I have the same problem with my 32-bit vista, I checked the memory diagnostics and the material is 100% ok, but I can't clean to start windows after updates yesterday (Nothing helps to: No. safe mod or any of that). Please your answer was very comprehensive and detailed for the xp thing, help me with vista (I oc original and I am a telecommuter, so I desperately need my computer fixed at the rear).

  Potatis,
  Here is an article which covers the removal of updates through the command prompt.  Hope this is what you are looking for.
  Command line switches to eat the package
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NPF.sys - non paged - memory leak

  Hey,.

  I have a Windows 7 with 8 GB of RAM. After running for a day or two, the RAM consumption is going upward and upward in the Task Manager, and the computer ends up by becoming completely insensitive. Doing some research with RAMMAP and found that the leak of memory is in the non paged. Ran POOLMON and found that the leak was with the AWP6 tag. Researched the C all way through 'findstr /s AWP6 *.sys' and found this string in C:\Windows\System32\Drivers\npf.sys but I don't know where to go from here.

  In addition, the process of the system (PID 4) creates a carrot and is 25% CPU usage.

  I can run tests or post screenshots as requested.

  In the npf.sys research, I found that this file is installed with WinPCAP, which was (unbeknownst to me) installed with another program I had installed on my computer. Uninstalling WinPCAP and restarting seemed to have solved the problem.

  Also, I had already run, windows memory diagnostic, so I knew that the RAM itself was not the problem.

  I hope this helps someone later.

• (2003 server) error 2019: the server was unable to allocate from the system non-paged pool because the pool was empty

  Hello

  I have a Windows 2003 server and get error (Server 2003) 2019: the server was unable to allocate from the system non-paged pool because the pool was empty.

  If anyone has encountered this error and has an instruction step by step to solve this problem please let me know.

  appreciate the help!

  Sincerely,

  Riaz

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac.  Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.

  I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac.  Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.

  Regarding the download, the correct trial version going, you should be able to manage on the link below.  If you have made a purchase and bought a Windows license so it is not valid for a Mac installation.  You will need to contact the Support from Adobe when they go bacvk vacation to see about getting the correct license.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• How to load firefox when I get this message of corrupted content error, the page you are trying to view cannot be shown because an error in the transmission of data.

  When I connect Firefox, it starts to load the page problem loading page and this message pops up error content corrupted

   The page you are trying to view cannot be shown because an error in the data transmission was detected.
  

  Same problem here. I don't see a fix listed on this site. If anyone has found a?

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.