Cannot get my usb card reader to work because I plugged my new wireless broadband
HI MY PLUG-AND-PLAY DIRECTED BY ABC PRODUCTS USB CARD READER WAS WORKING UNTIL WEEK LAST I CHANGED MY CONNECTION TO BROADBAND CABLE TO CONNECT NEW WIRELESS I UNPLUGGED AND REPLUGED INSIDE BUT STILL DOES NOT?
JOHN SOON
Hi John,.
1 Windows operating system you are using?
2 are you facing issue with other devices usb also?
You can read the following article and try to run the material Fixit and see if it helps.
Hardware devices do not work or are not detected in Windows
Hope this information is useful.
Tags: Windows
Similar Questions
-
Cannot get my SD card reader to work on my computer. Desktop computer.
Work does'nt drive SD card, no error message.
Hello
If you can not get the card reader to work, it can be replaced and/or an external card reader is not expensive.
They go bad sometimes. Try these:
/ Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.
------------------------------------------------------------------------------------------------
Control Panel - device - hard drives - SD card Manager or similar - double click - Driver tab - click on update drivers (this will likely do nothing that MS is far behind the certification of drivers) then right clicked UNINSTALL.
Now get to the USB controllers - right click - UNINSTALL everything in the category at the moment, EXCEPT the category itself - REBOOT. This will refresh the USB driver stack.
Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575Do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there. You can remove all instances of the drive and restart again.
http://www.NirSoft.NET/utils/usb_devices_view.htmlStart - type in search box - Windows disk - find Windows Disk Management on the list at the top - right click - RUN AS ADMIN search to see if there is a drive letter assigned or a conflict.
Check with the manufacturer of your system for the updated drivers - some card readers to do not use the windows drivers.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Cannot get my CD/DVD player to work
Cannot get my CD/DVD drive to work because be adjusted back to IE8, it says driver or network connection is not available what to do I please
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
-
Cannot get my dell to read my card reader or get to regonize my lg phone when I plug
Cannot get my dell to read my card reader or get to regonize my lg phone when I plug
Hi, Douglas,.
Go to the Device Manager (hold the windows down and press Pause/break) and look for a direct entry for the card reader or possibly an entry of "unknown" USB device Uninstall the card reader or the unknown USB device (RIGHT click on the device and then click on Uninstall LEFT) and then restart the PC and start Windows it should detect and reinstall the card reader. Uninstalling/reinstalling fixes several issues of device.
http://en.community.Dell.com/support-forums/desktop/f/3514/t/19270409.aspx
How do you connect the LG? You use the mass storage Mode?
Tools-> tools-> USB mass storage Mode
-
cannot find a laptop usb card reader driver
try to get a portable usb 2.0 card reader to work material saids does not.
Hello
What is the brand and model of the card reader?
You can visit the website of the manufacturer of the card reader to get the drivers.
For more information, see: How to manage devices in Windows XP
It will be useful.
-
Cannot get the USB to work HP G6-2278dx
My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)
I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)
I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.
I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.
and or
-
USB card reader does not detect memory cards
memory card
I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?
Hello
If you can't get the working card reader, you can use a card reader that is
not expensive.-------------------------------------------------------------
To check your version of Windows.
Check with the manufacturer of system and their forums (if any) for known issues.
Your other USB devices work?
Try a system restore to before the drive stopped working if possible.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-----------------------------------------------------------
If necessary:
References to Vista also apply to Windows 7.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
Show hidden devicesLook everywhere EXCEPT USB controllers for your device and if find you them (maybe
plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
for all instances.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and methods of Vista and Windows 7 are the same
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick the three 1st choice
to see if one is there.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems----------------------------------------------
This can be useful to determine if the wrong driver is loading.
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlI hope this helps.
-
built in sd card reader stopped working, I have windows xp in netbook gateway LT 20
My sd card is not showing under what whatsoever and everything stopped working. I have a gateway TL20 series netbook with windows xp. What could be wrong
You have another SD card to do the test? If no card does work, then this is a problem of gateway. If it is out of warranty, you can get a SD card reader that plugs into a USB port for a few dollars. eBay has them cheap or just Google.
-
Satellite Pro L300 - USB card reader does not support the 64 GB
HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you
HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank youHi, here is a link to not detected by the PC card reader:
http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
You can take a look, hope it will be useful to you. -
Is it possible to install a multi card reader into the usb port on the NAS200. I have no problem with the usb key, but can't seem to map to the card reader. See you soon
No it's not possible to attach a USB card reader... The NAS200 is USB Port is designed and cannot read USB hard drive connected to it...
-
Pavilion dv6 sd card reader not working not
I searched the advice and have not found an answer to my built in SD card reader does not work anymore. It worked fine until a few weeks ago. When I go to 'my computer', the sd card do not appears as a disk. I tried several cards with no luck. The cards work fine when I use a USB card reader, just not built in one.
I checked the driver in the device - at least one manager I think is the correct one - Realtek PCIE Card Reader.
Any other ideas? It's a pain to have to carry around an extra card reader. Thanks for the help
rv9a
Hello rv9a.
You have an idea about what day it started a few weeks ago? It is possible that you could restore your computer to a time before that time. This will help to verify that the problem is hardware related. If you are restoring, and the problem persists it is likely that the material is in trouble. One last step to confirm, if you wanted to do, would be to perform a recovery of the HP system in order to resume the laptop to factory conditions. If the problem persists after the recovery so you can say that it is a hardware problem with 99% certainty. Just know that you will lose all the data you do not back up before the resumption. If you perform a system restore, it should not remove your user files (just make sure to save anything on your desktop).
How to perform a restore of the system Microsoft Windows 8.
How to perform a restore of the system Microsoft in Windows 7.
How to run an HP system recovery.
I also took a glance at the page HP part Surfer to your laptop. This site lists the parts available for the laptop and gives you a good idea what you would be able to replace it yourself. I don't see the card reader listed here. This means it will take probably a motherboard replacement to solve the problem. I doubt that it is worth for you, but if you want to buy the piece on the site.
However, if the laptop is under warranty (check here) I invite you to contact HP Support and inquire about a repair on the computer. The number for US / Canadian customers is 1-800-474-6836. If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.
If you find these useful information or just want to say thank you, you can click the White Star under my name. It gives me good and I really appreciate it!
I'll look at the results of these measurements; If you have any questions do not hesitate to ask. I hope you have an amazing day!
-
SD card reader not working do not!
When I upgraded my Vista to Windows 7, I had to reload a large number of my drivers, now my computer does not read my SanDisk Memory StickPRO Duo with my photos when I insert it into the SD card reader. He was just plug-and-play. Now, it's even not recognize - nothing happens. I have a SONY laptop computer Vaio VGN-CS190. Help, please! -
Hi BMCEMAN,
1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager
i. click on start, type devmgmt.msc and then on enter.
II. research the name of the device
If the device is not detected in Device Manager, and check if it is the hidden device.
i. click on view under view hidden devices
II. develop all winks in Device Manager
III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works
2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works
Links: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly
Installing the driver in compatibility mode: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on another computer
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Satellite L670-DX1 - after the installation of SP1 cannot use the memory card reader
Hello
Since I upgraded my Satellite L670-DX1 of Win7 64 bit to Win7 64-bit SP1 (2 days ago) I can't use my memory card reader, he always says it is a bad card and I should reformat the card with any card.
Does anyone have a similar problem or better yet a solution for me?
Greetings
You have installed SP1 using Windows update option?
Have you tried to roll back the OS to an earlier time to see if the card reader is working properly again?Have you tried reinstalling the driver of the card reader?
-
I use HP Compaq dc7800 compact format, hp s/n: 2UA8491BGS p/n: AQ532US #ABA and Windows 7 Home Premium x 86 SP1, where can I find the USB card reader? http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?javax.portlet.begCacheT...
I appreciate it!
Hello
They are normally devive P-n-P. You just need to buy a care USB drive and plug it into the USB port, the card will end up as a drive in Windows Explorer. No drivers required.
Kind regards.
-
Memory card not seen by Windows XP computer using the USB card reader portable
I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.
Hello BSW58,
Thank you for your message. We will try to take a look at your AutoPlay settings.
Plug your camera card.
Conclusion Adobe once it opened.
Click 'Start' > click 'my computer '.
Right click on your card > select ' Autoplay > Adobe is listed as default application? If so, you can change it here.Please let us know if it did or did not help to solve your problem.
Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How can I make the add-on from the norton toolbar appear in the list of Add-ons?
Try to get norton toolbar visible id. It is present and active in the list of modules; but I does not appear in the list of toolbars. Therefore, it cannot make it visible on the screen.
-
L0.11.3 El Capitan iMac Under El Capitan impossible to remove some of the clipart in a colorful monthly calendar I do for the daughter and change every month. How do I clear old clip art and new import?
-
Registration for the Standard warranty and extended
I have registered my system to the Standard warranty and also fact of registration for extended warranty Service (2 years) and _got message for registaration successful for both, standard warranty and extended warranty_. But on the verification of th
-
Improved memory and image - Satellite A30
Hi all! I'm sure you all know, my satellite A30 has an integrated graphics card. On processors Intel site it says with RAM on approximately 197 MB (I can't remember the exact amount, but no matter), the GPU will run to about 64 MB. It does not say th
-
Try to burn JPEGs on a cd in "master" mode to make them playable on standard dvd players. the computer will burn on the cd and the images can be viewed on another computer, but cannot be viewed on a DVD player? any help would be great.