Cannot get the USB port to work after re-installation of SP2 on Satellite Pro L20

Similar Questions

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• Cannot get the Fn keys to work after installing Windows 7

  I have completed the installation of Windows 7, but impossible to get the Fn keys to work. I found and installed the 'flash cards' which seems to do a similar thing, but want the good Fn button as well.

  Anyone know who the drivers for it?

  Thank you
  Tim.

  Hello Tim

  How you installed flash cards?
  As far as I know, it must be part of the package of added value.
  You have installed Vista VAP on Win7?

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• Suddenly, Dell U2311H monitor two usb ports not working after 4 years

  Hello

  I've had this U2311H monitor for 4 years now, and it is connected to the Dell XPS 8300 desktop.

  The monitor has two USB ports on the left and for some strange reason, than all the two has stopped working recently.

  I did the following:

  1. disconnect the power to the monitor cable, then plug it back in to the monitor.

  2. unplug the upstream connect the USB cable (between the monitor and the desktop) and re.

  3. move the USB upstream on a different USB port on the desktop while the monitor is off.

  Nothing helps. :(

  That I could do to make the USB ports on the monitor work? I lose 2 practical USB ports and kind of desperate.

  Thanks in advance!

  Jason

  If it was me and the U2311H seemed much, I would just get a card 4 ports USB 2.0 Hub and plug it into the XPS 8300.

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• Cannot get the USB to work HP G6-2278dx

  My girlfriend just bought the HP 2278dx g6 with pre-installed Windows 8. Unfortunately, she's not worried about her and is pretty set on Windows 7. So I bought his windows 7 Ultimate and installed on his computer. I downloaded and installed all the drivers I could find, but I can't the usb on the left side of the computer at work. In Device Manager"also of shows me some other stuff that does not work (I would like to list, but she of not here right now and has the computer with it and won't return until Wednesday)

  I thought it would be a chipset or something I need to download, but NOWHERE on the internet find a chipset for the HP g6-2278dx win7 64-bit. Sort could someone help me? (btw, the only usb that works is on the right side next to the power input charger.)

  I just installed Win 7 Ultimate 64 bit version on my G6-2278dx. For me to get my USB 3 ports to work, I installed the drivers for the AMD chipset from this page.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I believe that the network card is the 8168 8169. I don't remember the hand. You would like the Win7 and WinServer 2008 R2 driver (Version 7.065) I'm not on my laptop, so I'm out of memory which is not always good. Wireless network card works since the drivers used by Windows 7 if I remember correctly, because that's what I used to download all the drivers I needed for the other stuff.

  I'll have to check which driver I used for wired LAN port, but you can get them from Realtek on these two pages.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  and or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• USB port not working after Windows updates

  My laptop does not recognize a USB device I've used in the past.  If I restart the computer after trying to plug it, I get a system repair and it cannot solve the problem.  The only way I could fix is to do a system restore in Sfe Mode, to a point, 2 weeks ago.  The only changes since then have been Windows updates.  How can I fix it

  Restoring the last known time that everything worked as you want!  Check that it works.  Then start to install the updates at the same time with restarts and tests in between.

• Cannot get the floppy drive to work.

  Well, maybe noone here will want to address this issue, but I really need an answer that I use the files mentioned below in my profession. Any help would be appreciated. And if I posted this in the wrong place, sorry, this is the first time I used these forums and didn't really know where to post. 

  OK, I know this floppy are are outdated, but I have a bunch of files that I created years ago when the diskette was everything you had.

  I had a disk in my computer that I was using and one day I tried to open some files in the floppy drive and it says that the disk has not been formatted and I wanted to format the IDE drive.

  I got a new floppy disk and it says the same thing. I tried to format it and received a message that said Windows cannot format the drive.

  So, I thought that maybe the old IDE floppy drive had gone belly up. I ordered a new floppy USB of TigerDirect drive and installed. It does the same thing.

  Can someone help me get this floppy drive so that I can access work files.

  I have a HP Compaq dc7600 form small computer running XP Pro SP 3. The floppy drive I ordered is an external USB floppy drive PowerUp G54-8016.

  I have a Zip USB drive and it works.

  Any help would be appreciated.

  I don't know why the IDE floppy drive was working and then quit, and now the new floppy drive will not work.

  Hi kemperhills,

  ·          Is it possible to check if the floppies are still good?

  ·          The diskette was made read-only?

  According to this Microsoft article this could happen because the disks are bad:

  http://support.Microsoft.com/kb/140060

  Was there a kind of switch on it? If so have them try to change the switch and try again.

  http://support.Microsoft.com/kb/309623

• How can I fix the USB ports on work for Vista?

  I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem.  Thanks in advance

  You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.

• Cannot get Equium L40-10 X work after malware attack

  Hi, I'm new here.

  Only the portable computer satellite 1 week and it is infected by malicious software. Norton Internet Security has been enabled and up-to-date, but alas the worms won. It displays the message "Windows Explorer has stopped working" during attempts to start. Curiously, although the recording of AntiVirGear v3.7 message works perfectly.
  I have tried to format the C: partition, run all Safe Mode options, install Win Vista and install XP, CD recovery, BIOS settings, Windows repair and of course my old friend MSDOS.

  I removed the hard drive to 120 GB (3 sheets) and tried to pop in the modular Bay with my trusty so I could do as I didn't like another drive, bootable to harvest my files on the E: partition, then put the thing in shape. But the pins are different, although the disks are the same size. So basically I'm stuck with a PC deadish no fault of Toshiba, MS or anyone...

  Except the disbelievers AntiVirGear v3.7 programming which will gladly release my yoke of its channels referred that I give them my credit card information (if they have not already snatch that). If I do that it will be the beginning of "more than a purchase" and which will probably end my misery... So if anyone here can help, I have the hammer and the screwdriver ready.

  I went to Norton Support and they told me to try things I've already tried. And then they left, "contact MS. MS does not support OEM versions, so here I am.

  Please have a think on this subject.

  Thanks for listening.

  Hey Buddy,

  man, this REALLY seems to... REALLY strange.

  Therefore, to better understand:

  You have malware on your system (c :) drive), you want a system that works? Right? But you first want to sure some of your data?

  OK, it would be preferable to seize your hard drive, go to the following electronic market and then buy a USB - HDD enclosure. But first check if the pins did (which was the idea of taking your car to the market to verify THIS).

  Connect the USB - HDD to your system to another, copy your files, and then delete the ENTIRE disk. It would be best to try this CD to format and repartition your drive:
  www.UBCD4Win.com

  Then after you completely remove all partitions, you can drive your recovery and recover a system that works.

  Welcome them

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• Why USB ports stop working after Windows loading screen?

  USB ports worked fine until a month or two it is a. I tried a system restore, but that did not work. System recovery PC Angel graphic screen freezes. I tried to uninstall and reinstall the USB controller from Device Manager, but it freezes and I have to leave the program via the Task Manager.

  Hello some poet,

  Thank you for your message.  Try to go to your computer manufacturer's website and download/install the USB drivers for your specific computer.  It must ignore having to install the drivers through the Device Manager.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• key code - cannot get my key code to work after replacing my hard drive

  has had to replace my drive hard reloaded vista and now cant get code for my key to work what I do?

  Hello

  1. what exactly happens when you try to use this key code or product key? You get the error message?
  2. How do you try to activate it?

  Please answer these questions and tell us more about the issue. This could help us help you better.

  Also take a look on the underside of the articles that might help you.

  Error message when you install Windows Vista: "unable to validate your product key. "Review your product key and make sure that you entered it correctly.
  http://support.Microsoft.com/kb/947190

  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224

  Where can I find my Windows product key?
  http://Windows.Microsoft.com/en-us/Windows-Vista/where-do-I-find-my-Windows-product-key