Cannot get the value of the text element
HelloI have a screen in the text field and I'm defining its value via javascript (using $s). If I keep the point as display text (does not save the State), I can see the value set, but get the undefined when I try to access it.
If, on the other hand, I put it as (State record) I don't even set and get still undefined.
Can someone please tell me how I can get its value or to register the value provided by the javascript?
Thank you.
Andy.
PS You forgot to mention, I work with Apex 3.2
Published by: Andy, 20 Sep, 2010 17:53
This can help
Re: Editing session with javascript State
Tags: Database
Similar Questions
-
Cannot get the text in the field description flex
Hi all
I try checking if a field flex text value contains anything or not. IE, this flex field is a mandatory field and I need to check when running.
But I can't get the text value of the descriptive flex field written by the user at run time.
OADescriptiveFlexBean oadescriptiveflexbean1 = (OADescriptiveFlexBean) webBean.findIndexedChildRecursive ("PerfRatingFlex");
If (oadescriptiveflexbean1! = null & & oadescriptiveflexbean1.isRendered ())
{
String revision = (String) oadescriptiveflexbean1.getAttributeValue ("ATTRIBUTE12");
}
I can't retrieve any value of variable revizeNedeni. I tried a few combinations of such use, and I searched the forum for this problem and I tried these suggestions. But I failed.
Could someone give me some examples of specific code for this?Hello
PerfRatingFlex9__xc_ is not FDF Id field, your identifier is PerfRatingFlex9, just try it with this, you will get the data
in the page source view, PerfRatingFlex9__xc_ and PerfRatingFlex9, both displayed against the identification sticker, if you search with "PerfRatingFlex9" you will find the same thing against "id =" tag after the prompt of the FDF field.
thanx
Pratap
-
[v 20141] Cannot get the text value code entry type
Hello world
I noticed that there are a lot of changes between versions 2014.0 and 2014,1.
In the old version, I used to put a text of the entry type and get its value in this way:
//-------------------- put code -----------------------------------
var text_element = sym.$("t_element")
text_element.html("");
inputtext_element = $('<input_/>').attr ({'type': 'text', 'placeholder': ", 'id': 'text_element', 'size': '30'});
inputtext_element. CSS ("background-color", "#ffffff");
inputtext_element. CSS ('font-size', '14px');
inputtext_element. CSS ('color', ' #000000 ' ");
inputtext_element. CSS ('outline', 'none');
inputtext_element. CSS ("at borders', 'none');
inputtext_element.appendTo (text_element);
//------------------- get Code -------------------------------
var input_value = $("#text_element").val ();
If (input_value == 'something') {}
doSomething();
} else {}
doSomethingElse();
}
//-------------------- end code ------------------------------
But now I can not use this system.
I inserted the text this way entry type:
SYM. $("t_element") .html ("< input type = 'text' = ' to write here!' placeholder = 'textElement' size = '30' style =' border: none;") background-color: #FFF; do-size: 11pt; Color: #000000; " / > ») ;
but now I can't retrieve its value.
Thanks for the help!
We do not add default jQuery as a dependency in 20141 more. Some of these tasks are dependent on the jQuery. Can you try to add jQuery as a dependency? You can use the option as shown in the attached screenshot. We are currently working on how to make it easier to add these dependencies if you need on a regular basis.
DIA-
-
Cannot get the value of element of disabled text.
Hi all
In my form. I have two or three groups of radio and the text element. When I select a radio button I am disable the text element using $x('P1_AX').disabled = true
This part works fine. But I have a "PL/SQL block anonymous Unconditional ' which takes the value of the disabled and the update in the database.
The value of the disabled will be void even if I have a value in it. I am able to access this value using javascript. Any help is very appreciated.
Thank youDisabled items are never submitted. Therefore, you can access the item values disabled on the page dealing with the part of a page of the APEX. Your options are to
(1) enable the item before submitting
(2) create a hidden item coming from the same source as the element off and use the element hidden in your post submit pl/sql processCITY
-
How can I get the text value of an element XML in MXML?
Hello
I have the following XML loaded into a variable of XML type:
Properties of <>
the RIMpro data collector Configuration < comment > < / comment >
< key="server.pear.username"/ entry >
< key = "enter server.apple.retry.times" > 5 < / entry >
< Enter key = "rdc.proxy.host" > http://192.168.1.2:8080 < / Entry >/Properties >
I can easily get the key attribute displayed in a DataGridColumn by setting the dataProvider my variable and the data in "@key" area But I don't know how to get the text value in a second column... Is it possible or do I have to change my XML to something like this:
Properties of <>
the RIMpro data collector Configuration < comment > < / comment >
< key="server.pear.username"/ entry >
< key = "enter server.apple.retry.times" value = "5" > < / entry > "
< Enter key = "rdc.proxy.host" value ="http://192.168.1.2:8080"""> < / entry > "/Properties >
Thanks in advance.
Marc
Yes, you'd better change your XML structure to fit the internal mechanisms of the DataGrid.
As model dataField require each element of the grid line to have a named property to display, otherwise you will be forced to overcome this model to the custom help labelFunction for the particular column that will implement your custom actions on how to extract the appropriate data for this column of the grid line item. It will be much more complicated that just reorganize your xml structure.
-
How to extract values of classic report column in the text element
Hi all
I've created a classic report (select id, name,' < input type = "button" value = "add" id = "add" name = "add" > "as" add details "details ;) with a single column as column values want link.i in the text element when I click on the link of that particular record of the report)
(1) in the link this link column property I've specified the URL as [javascript:insert_in_table(#ID#,#NAME#)]
(2) text two article P_ID, P_NAME
(3) in the header of the page, I've specified as javascript
< script type = "text/javascript" >
function insert_in_table (id, name) {}
var regId = ' #detail #'.substr (1);
var req = new htmldb_Get (not null, $v ('pFlowId'), 'APPLICATION_PROCESS = add', $v('pFlowStepId'));
Req.Add ('P_ID', ID);
Req.Add ('P_NAME', Name);
forced. GetAsync (function () {}
If {(p.readyState is 4)
$a_report (regId);
}
});
}
< /script >
(4) created a (add) process whose point: on demand, run this process when requested by ajax
pl/sql: insert into name_detail (id, name) values (: P_ID,: P_NAME)
now the problem is I m not getting the values of column in the report in the text element, it only shows white.
Kind regards
Ketan
Hello Ketan,
Assuming that you want to insert the values into the table, this is why you want to set values for the element,
If this is the case, then no need to define values for the element to insert.
Follow the steps below, it is one of the embodiment of your condition.
Step 1: Put the code below in your classic report query
assuming that the id is of type number and the name is of type varchar, that's why I am attaching the name to apostrophe, see line 3
select id , name , '' as "Add to detail" from detail
Edit 'Add details' column-> column attributes-> view-> column of Standard report
Step 2: Create a process in the processing of the Page
Name: INSERT_DATA
Address the point: on demand, run this process when requested by ajax
Process: putting the code below
Declare P_ID number ; P_NAME varchar2(50); Begin P_ID := apex_application.g_x01; P_NAME := apex_application.g_x02; insert into name_detail(id,name) values (P_ID,P_NAME); End;
Step 3: Create a java script function to call your insert ajax process.
Change the Page-> the function and the global variable declaration-> put the code below
function insert_in_table(id,name) { apex.server.process ( "INSERT_DATA", { x01: id,x02: name }, { success: function( pData ) { } }); }
Hope this helps you,
Kind regards
Jitendra
-
My requirement is
If we click on the POP UP dot LOV button then I want the dependent value of this item in column of the text element in a table.
How do I get this as a table?
Hi Dan,.
I have a table, in the first column is popup LOV.and second column key is text element.
So my question is if we click contextual key lov and select employee name, then I want to show the email address of this employee in the second column of tabular presentation.
This can be done with AJAX. Write a JavaScript function on the onchange event of popup LOV item (Employee) key and pass the number of the employee selected to your AJAX call, go get the employee email and assign it to your entry corresponding to the key LOV popup text has changed.
As your dealing with Form (Wizard Based/APEX_ITEM Based-not specified) in a table, you take insofar as each column is the table of elements mapped to APEX_APPLICATION input. G_FXX tables and therefore to write JavaScript to locate the item to update.
I hope this helps!
Kind regards
Kiran
-
Cannot get the "<; FEFF >;" string in the selected text [indesign CS6]
Hello world!
I can't get the string to the selected text. The selected text contains several xml tags.
In adobe indesign cc version of 2014, the selected text is bring the string «< FEFF >» tags
In indesign adobe cs6 version cannot get the string "< FEFF >. they do ""-empty space.
Are the above-selected text contains several xml tags.
but I get content using script code can't get the string.
the script gives the result, xml tags are converted to "". "" I expect "< FEFF >.
I expect the output is: "< FEFF > Applescript < FEFF > < FEFF > selected text < FEFF > < FEFF > < FEFF >."
Please help me...
Thank you
John Peter.
the script gives the result, xml tags are converted to "". "" I expect to '
'. The xml tags are not converted to "" but "\uFEFF" (zero-width space non-bec), it is the character used to represent the tags in a text frame. Looks like the apple script converts a hexadecimal representation unicode values.
-
Cannot get the value of the selection of OAMessageChoiceBean
Hello
Of our 11i to R12 upgrade, in the customer's advanced search page, we are unable to get the handle suitable for OAMessageChoiceBean (in extendedCO).
The snippet for the bean handling is as follows:
OAMessageChoiceBean PartyStatusFilter = (OAMessageChoiceBean) vOAPageContext.getRootWebBean () .findChildRecursive ("xxfeF426PartySearchStatus");
String xxTest = PartyStatusFilter.getSelectionValue (vOAPageContext);
The value of the above xxTest (in R12 approx.) is coming with a null value. Considering that the same code works in 11i environment and the xxTest output = "A".
So we cannot get the value of the selection of the messagechoicebean in our environment of R12. I already looked in previous similar positions in this forum, also tried to use getSelectionText (vOAPageContext) or getSelectedValue(), however, it did not work.
Pointers please?
Thank you very much
ZahidHi Zahid,
Try with this ID = HzPuiPartyStatus
-Had
-
How to get the control to one of the text element?
Dear people,
I have two items of text to say TEXT_ITEM5 and TEXT_ITEM6.both values entered in the text elements must be equal.else that an error message should be displayed and two items of text should be cleared.so that I wrote the following code in WHEN BUTTON the shutter as.
Its almost works well, but after having erased the text in the two elements of the control text should go back to TEXT_ITEM5. I even tried GO_ITEM but is not working properly.pls help me with suggestions.If :block3.text_item5 <> :block3.text_item6 then c:=show_alert('ALERT21'); :block3.text_item6:=null; :block3.text_item5:=null; raise form_trigger_failure; end if;
Regarding
VidsHello
If the value of two text element should be equal so why give the possibility to enter 2 text boxes? Enter 1 text and WHEN-VALIDATE-ITEM trigger of this element, assign the value to the other text element. And if you still need the old way, then you must write the GO_ITEM integrated before the RAISE FORM_TRIGGER_FAILURE statement.
IF :BLOCK3.TEXT_ITEM5 != :BLOCK3.TEXT_ITEM6 THEN C := SHOW_ALERT('ALERT21'); :BLOCK3.TEXT_ITEM6 := NULL; :BLOCK3.TEXT_ITEM5 := NULL; GO_ITEM('BLOCK3.TEXT_ITEM5'); RAISE FORM_TRIGGER_FAILURE; end if;
Kind regards
Manu.
-
assign a value to a text element using the PL/SQL function body
Hello
I want to assign a value to a text element using PL/SQL function body option in the Source elements. But the below error when I try to apply it.
Source code:
declare
name varchar2 (100);
Start
If v ("P3_CREHIDD") = 'Edit' then
Select ename in the name of cpy_emp where empno = v('P3_EMPNO2');
end if;
end;
ERR-1904 unable to calculate the default item: type = computation_type = function body declare name varchar2 (100); so start v ('P3_CREHIDD') = 'Edit' and then select ename in the name of cpy_emp where empno = v('P3_EMPNO2'); end if; end;.
Thank you
David.Hello
Your body of the function doesn't return anything.
Maybe it worksdeclare l_name varchar2(100); begin if v('P3_CREHIDD') = 'Edit' then select ename into l_name from cpy_emp where empno = v('P3_EMPNO2'); end if; RETURN l_name; end;
BR, Jari
-
The text element values value when the user clicks a report line.
The text element values value when the user clicks a report line.
I have a report based on the EMP table and two elements P911_EMPNO, P911_DEPTNO. When I click on one of the lines the EMPNO and DEPTNO is copied to the text elements.
It works fine if I leave the EMPNO and DEPTNO as SHOW report, but if I then these clear values are not retrieved the report form (my javascript is very limited).
I need a method to retrieve the data hidden in the report and display in the text without the reposting of the page elements.
Also, would be nice if the line was highlighted until another line is clicked but especially is my priority.
Elements
P911_EMPNO, P911_DEPTNO (field of disabled text, saves the State)
Report
Select * from emp using the model of report below.
Custom model.
standard_report_cust_P330-a copy of the standard report with a change model.
BEFORE EACH LINE
< tr onclick = "selectRow (this);" #HIGHLIGHT_ROW # >
* Javascript in the Page Header.*
< script language = "JavaScript1.1" type = "text/javascript" >
function selectRow (p_tr)
{
var l_deptno = p_tr.childNodes [8] .innerHTML;
var l_empno = p_tr.childNodes [1] .innerHTML;
html_GetElement ('P911_DEPTNO'). Value = l_deptno;
html_GetElement ('P911_EMPNO'). Value = l_empno;
}
< /script >
If anyone has any ideas. Thanks, PeteHello
When you use this type of report model, you actually control on where the column values are used - and they can be used several times.
For example, a setting of 'Model line 1' for one such model could be:
<tr> <td class="c1">#1#</td> <td class="c2">#2#</td> <td class="c2">#3#</td> <td class="c2">#4#</td> <td class="c3">#5#</td> </tr>
#1 # fact refers to the data in the first column, #2 # for the second and so on. So you can do:
<tr onclick="javascript:dosomething('#1#','#2#');"> <td class="c1">#1#</td> <td class="c2">#2#</td> <td class="c2">#3#</td> <td class="c3">#5#</td> </tr>
For example, by clicking on the line would trigger the dosomething() function and pass in that the values of the first and second columns. Also note that the 4 # does not appear now - this column is 'hidden' (but note that you must check the box to show the column)
Andy
-
Yes, I tried the similar topic before posting about this.
I understand that we can use standard input of entrance of parameters of the System exec.vi, but still can not find an answer on "how to get the text on the screen of the BACK.
1 seal of sw500912_2701test.exe is the exe of Basic-back , (change to rar .tar)
2. double-click on the .exe, run this file. The first parameter is the rate band, the default value is 9600.
3. setting the COM #.
3.
Can be useful to check that the command is actually being run. When the dos window opens is there any text?
Try cmd /c "
." -
Hello
I use DAQmx screw create clock.vi channel.vi and sample, they have entered (Terminal configuration of entry) and (active) both are I32 and have enum watch drop-down options. I want to use these text values to put in my excel file, but they give numerical codes associated with respective option. is it possible to get the text as it is.
It is not an enum but I32 resembling enum...
Help, please...
Thank you
In fact the active side is a control of the ring. Just a click and create a property for text.text ring node. This will give you the selected channel when the property node runs.
I hope this helps.
-
Get the text in the Edit field
Hello
In my Application, I add a check box and a label field and a field change a grid field Manager. Then this network domain manager, I add several times in Vertical field Manager. So it's looking like list of items. Now, when I checked the box five, trying to get the text of the corresponding edit field.
This is the code for the domain network manager:
int c[] = {screenWidth/6, (screenWidth)/3, (screenWidth)/2}; gm = new GridFieldManager(c, Manager.VERTICAL_SCROLL); Logger.out("Grocery", "Here it is coming"+i); cbfChecked = new CustomCheckBoxField(); cbfChecked.setChangeListener(new FieldChangeListener() { public void fieldChanged(Field field, int context) { if(checked[i] == false) { checked[i] = true; } else if(checked[i] == true) { checked[i] = false; Logger.out("Grocery", "It is UnChecked" +checked[i]); } } }); gm.add(cbfChecked); Logger.out("Grocery", "Adding first Label Field"); LabelFieldCustom lfFrom = new LabelFieldCustom((String) m_vtrItems.elementAt(i),Color.BROWN,FONT_FAMILY_0_SF_AS_16,Field.FIELD_LEFT); gm.add(lfFrom); Logger.out("Grocery", "Adding second Label Field"); efcAmount = new EditFieldCustom(Bitmap.getBitmapResource("dob_text_box.png"), 25); efcAmount.setMargin(new XYEdges(30, 0, 0, 0)); gm.add(efcAmount); return gm;
Here I add the grid domain manager several times:
for (int i = 0;i < m_vtrItems.size();i++) { vfm.add(getRow(i)); vfm.add(new SeparatorField(SeparatorField.NON_FOCUSABLE)); }
Here is the snapshot of my screen:
Please help me.
You can access the field by index (prone to errors if).
or you could save your fields in a data structure, such as a hash table, with the checkboxfield as key to the editfield as value.
or... -
How do I get the separate elements of a table in a bean method?
Hey everyone, how are you?
I use Jdeveloper 12.1.2.0.0.
I have a bean method that gets the items on a table-adf and I need the separate elements (of a given attribute) this table to highlight in the other table.
For example: my table elements:
ID name Tecnolgy
1 oracle ADF
2 oracle Jdeveloper
3 Microsoft Visual Studio
And I need the separate names in this table:
Oracle; Microsoft
So I highlighted them in another table.
Normally I use an iterator and I will one by one and highlight what I want (as you can see, with a large table it can take a long time) and I wanted only to get the separate elements.
My method of beans as something like this:
DCIteratorBinding conIter = ADFUtils.findIterator ("VFactSalesNewView1Iterator");
Line r [] = new Row [conIter.getAllRowsInRange () .length];
r = conIter.getAllRowsInRange ();
for (int i = 0; i < conIter.getAllRowsInRange () .length; i ++)
{
long productsInt = (Long) r [i] .getAttribute ("FkProduct");
...
matchEmFactSalesProducts (r [i]);
..
}
I was wondering if it was possible to put a query and return the items in the request as lines (as I do with the iterator) or another possibility here.
The request for my first table (the one in the example) is the following:
SELECT VFactSalesNew.N_SALES,
VFactSalesNew.QUANTITY,
VFactSalesNew.ID_ANO,
VFactSalesNew.QUARTER
OF V_FACT_SALES_NEW VFactSalesNew
WHERE
((nvl(:var_dimCoin,'0') = '0' OR FK_COIN IN (select * from THE (select cast (in_list(:var_dimCoin) as mytableType) double) a)))
and the table I emphasize only has a select * from tableX;
Any ideas?
Kind regards
Frederico.
Hi Frederico,
Hope you are well. Your VFactSalesNew table is filtered by any chance? Approach, you could do is to try to create a new VO with the following query:
SELECT DISTINCT (yourTable.NAME)
From yourTable
But if your table is filtered, then I recommend you create a method in your implementation ViewObject that returns a LIST and there you iterate over the result set. In all cases, you will need to browse the whole list to get distinct values.
Concerning
Maybe you are looking for
-
Mail.app crash at startup
Suddenly, mid-afternoon Friday, my Mail.app started crashing on my laptop whenever I start it (Mac Book Pro, 2010), and today when I turned on a mac mini it started doing the same thing. When I open the app it begins to get the mail, and before the f
-
For example, one of my bank sites, there is a window to type the user name. When I have not given attention, I didn't know that I had not touched the button tab and then type the password. Now the name of username/password combo appears in the list i
-
Update corrupted retriever database
Someone knows how to solve this problem. Get also corrupted message when I run the slim Installer on the client?
-
my computer looks like an echo chamber... . How can I change?
My sounds Windows Vista as a room of echo and I don't know how to change it. Help?
-
BIS and GPRS plan questions...
Hello... I use the blackberry 9300 curve... bundle 6.0 and I m sending a http request to my application... I have BIS plan activated on my vodafone sim card... But the problem is when i m sending the apn "blackberry.net "by the url... it shows me Net