Cannot get this hp photosmart 7550 installed on this computer why

Similar Questions

• Windows cannot repair this computer automatically (Vista) after changing the motherboard

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  Clarification:
  Windows Vista is preinstalled on this system?
   
  If I read (and cited only) correctly - Yes, which is not going to work.  The license for Windows Vista was related to the Compaq system motherboard.  If you had that repaired under warranty, HP? Compaq could have helped you.  As you have created a new machine (motherboard especially) now, you will need to purchase a new license for Windows Vista or any other operating system of your choice.
   
  You could, I suppose, buy the OEM of Windows 8 version.  You will have the same problem later (OEM licenses is related to the first motherboard it is installed and activated with.)

• "Windows cannot repair this computer automatically" - Satellite C660-108

  Got a new laptop for Christmas yesterday and it worked fine yesterday, I came home tonight and he asked me to click on restore and then restart. I realized that, now, whenever I go to turn on the machine, it brings the message "Windows cannot repair this computer automatically" and a saying to have connected external devices to and remove, then (which I don't have)...

  Was called "The Tech Guys" they said it was probably because when I started the laptop arrived so many updates etc and one of them went bad and I need to call back with the front desk and they'll go through it with me.
  So I intend to do, but I would like it if people could give advice on how to solve this problem.
  Thanks :)

  In my view, ting best that you can do now is to reinstall the OS using the recovery disk.
  After the own pre-installed operating system it will be working correctly again.

  How to do this you can read in the document or as a result of this document - s user manual http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  If you have any other questions you are welcome.

• How to fix "Startup Repair cannot repair this computer automatically.

  My computer not boot not correctly. I just get a blue page with an error message that says "Startup Repair cannot repair this computer automatically." How can I fix?
  The following problems:

  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:1114129 problem
  Signature of the problem 05: 0xa0
  Signature of the problem 06: 0xa0
  Signature of the problem 07:0
  Signature problem 08:2
  Signature of the problem 09: WrpRepair
  Signature of the 10:1168 problem
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Hello

  First disconnect the external devices connected to the computer except the mouse and keyboard.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  As Windows automatically launches the Startup Repair tool there is a possibility that she cannot cross the whole scan problems.

  I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on Repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If startup repair does not resolve the issue then in the same way using the windows vista disc try to restore system until the day where computer was working fine.

  I hope this helps!

• "The Startup Repair cannot repair this computer automatically"

  My eMachines D520 running Windows Vista Home Edition Premium does not start. So I searched the problem on the Startup Repair, I get this message:

  Startup Repair cannot repair this computer automatically

  Signature of the problem:

  Problem event name: StartupRepairV2

  Signature of the problem 01: ExternalMedia

  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:131074 problem

  Signature of the problem 05: NoRootCause

  Signature of the 06 problem: NoRootCause

  Signature of the problem 07:0

  Signature problem 08:2

  Signature of the problem 09: WrpRepair

  Signature of the problem 10:0

  OS version: 6.0.6000.2.0.0.256.1

  Locale ID: 1033

  Please help me. I don't have the slightest idea what to do!

  / Samuel

  You may need to restore your PC to factory settings.  You should have a system restore disk from emachines or the restore option when you start.  Look for a message when you turn on saying something like "press _ to restore the factory settings.  If you do not, you will need to contact emachines to get a drive on their part.  They may charge you a fee and it is possible that they might tell you that they cannot help you.  But I hope that this does not happen!

  I hope this helps.  Good luck.

• Windows cannot repair this computer automatically

  Original title "Help? Laptop used to start.
  My laptop was working fine and then I went to turn it on and it keeps trying to windows startup repair and then says "windows cannot repair this computer automatically" if I click on problem it details reads as follows: StartupRepair V2

  AutoFailover

  CorruptFile, etc..

  It shows a ton of different ' problem signatures and a group of numbers too?  He repeated also unplug all devices recently attached to calculate as a camera or portable music player?  Don't attach something like that again?

  Any ideas what would cause this and how or if I can fix it?  IM wondering if my teenagers attached ipod or iphone and done something stupid?  Help?

  Hello

  1 did you do changes on the computer before the show?
  2. What is the brand and model of the laptop?

  Method 1:
  You can start the computer in safe mode and check if you are able to start
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  You can also perform a clean boot and check:
  http://support.Microsoft.com/kb/929135
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
  

  Method 3:
  If you are able to boot into safe mode perform control and restoration of the system:

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 4:
  Alternatively, you can run using the Windows Vista DVD startup repair.
  You can check the links:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Click on the link below:
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Startup Repair cannot repair this computer StartUpRepairV2

  I have problems with the phone of my son he needs for the University and suggestions for this problem will be very appreciated.
  It is a Dell Inspiron 6400 running on Vista Basic

  He had a problem with Windows Update, refusing to update and tried to run a few tests to sort, but everything that he created more serious problems
  When we start the laptop: cannot start, and the startup repair Windows checks the problems with the following details:

  Startup Repair cannot repair this computer automatically

  Problem event name StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:393222 problem
  Signature of the problem 05: FailureDuringSetup
  Signature of the 06 problem: FailureDuringSetup
  Signature of the problem 07:0
  Signature of the 08:0 problem
  Signature of the 09 problem: unknown
  Signature of the 10:1166 problem
  Version of the OS 6.0.6000.2.0.0.256.1
  Locale d: 1033

  Tasks already tried in the F8 Advanced Boot Options:
  In Safe Mode: loading Windows files:- then screen arrow black cursor may move

  Last good known Configuration: runs as if laptop will start and goes to black screen - can move cursor arrow

  I also tried to run with the disc that came with the laptop and found no backup configuration or previous.

  Tasks already tried in the F8 Advanced Boot Options:
  In Safe Mode: loading Windows files:- then screen arrow black cursor may move

  Last good known Configuration: runs as if laptop will start and goes to black screen - can move cursor arrow

  I also tried to run with the disc that came with the laptop:

  Restore the files system and settings: no restore points are created on your computer's system disk

  Windows complete PC Restore: no backup locations valid not found but gives options to insert the location: Date and time: computer: but it won't allow me to enter anything.

  Command prompt: X:\Windows\system32 >

  Thanks Robert

  I suggest you start troubleshooting with the following diagnostic tests.  They will save you a lot of time and grief if there is a hardware failure, and you have records on site in case you need it in the future:

  H/W Diagnostics:
  Please start by running the diagnostics bootable hardware:
  http://www.carrona.org/memdiag.html (read the details at the link)
  http://www.carrona.org/hddiag.html (read the details at the link)

  Post back with the results of the tests and we'll go from there.
  -John ( http://www.carrona.org/index.html )

• Cannot repair this computer automatically in windows 7

  Whenever I try to start my computer it tells me Windows boot using the Startup Repair. Whenever I do this it says that it cannot repair this computer automatically. In the details of the problem, it reads

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:121 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06: 1

  Signature of the problem 07: NoRootCause

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  I always did this whenever the computer automatically updated. I can restore it, but then it just updates later that day here. Help, please!

  Original title: update Windows 7 send my computer in Startup Repair every time

  Hello

  Please contact Microsoft Community.

  I understand that you are faced with the question on the Startup Repair.

  I will definitely help you with this.

  I suggest you go through the link below:

  See the suggestions that were marked as answer in the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/all/startup-repair-cannot-repair-this-computer/718e1c0c-A907-404e-b48e-700e4e65c248

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• I had to get a new hard drive installed on my computer dI had to get a new hard drive installed on my computer, how do I reinstall Creative Cloud? o I have reinstall creative cloud?

  I had to get a new hard drive installed on my computer how can I reinstall the creative cloud?  Do I first have to use the trial version?

  Hi Robin,

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Cannot get Norton Int Sec 11 install

  I uninstalled my old antivirus and I tried to install Norton Internet Security 2011.  It will not install and I get the message ' process cannot continue a system service which can not be installed or may not be started.  Repair your windows installation before continuing. »

  After 2 hours online with a Norton tech, I was told my Terminal Server service is not running (I don't know why he is not running, now after 3 years?)  And I need to contact Acer.  Acer told me that they cannot help me because my computer is no longer under warranty.  So, I'm posting here in the hope that someone can help me!  Thank you!

  HiDave1971,

  ·         What security software was previously installed on the computer?

  According to the suggestions on the Norton site for this error message.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080923103733EN&LN=en_US

  Check and make sure that these services are started and set to automatic on the computer.

  ·         Terminal Server services

  ·         Remote procedure (RPC) call service

   

  (a) click Start type services.msc in the Open text box, and then click OK.

  (b) in the Services (Local) list, right-click service and then click Properties.

  (c) make sure you sure it is started and set to automatic.

  If the services have been started not, try to start and try to install Norton software on the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get the Telnet Client to install on Vista Ultimate 64 bit

  I am trying to install the Telnet Client on my Vista Ultimate 64 bit.  After waiting for quite a long time so he could install, I get this message:

  "An error has occurred. Not all features have been changed successfully. »

  Anyone know what this means and what I can do to make this complete installation?

  Thank you.

  C.

  Hello Var242,

  We will check your services and see if the telnet service is disabled.  If it is disabled, then lets set it to automatic.
  Even after installation, this service tends to default to disabled.  We will check this and see if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to install or reinstall the network driver. Cannot use this computer for downlosd it

  My computer to work together a new computer for me. It is impossible to update the drivers do for worksheet. It has taken the to do. You will need to update to install or reinstall the network drivers. How it's done. I can't use this computer to download, due to the fact that it a work computer.

  You must go to the website of manufacturers of network cards and download the proper drivers.

  I hope this helps.

• I can't get the C6350 HPPhotosmart fully install on my computer running windows 7 64 bit.

  I use a wireless setup and installation appears to stall HP Photosmart essential. I can print. The HP Solution Center does not open because the installation is not complete. I try to get to be able to scan from my computer.

  OK, let's try again:

  -With the help of the uinstaller to the start menu > all programs > Hewlett-Packard unstall the software folder.

  -Start and run Windows Update again and again until there is no updates.

  -Restart your PC.

  -Without doing anything else, or from any other downloading software from the "Support & drivers" link at the top of this page.

  -Once the installation is complete, restart your PC.

• help me get this computer running right again

  I download something for movies and I caught a virus. Cannot get into safe mode on the computer is because you enter the password on a black screen with writing and windows will light up and then u press ok and Office lights.  When I was working on the computer, I went to control the classic display, I saw like three icon, which were in boxes with three points of color and the rest were right.  I know I have a virus and anything could happen.  Download malware bythes but able to get into safe mode.  help help help help PS he saided 14 threats there.   Delete them but my computer got a virus and do not work.

  As you can not start the computer with reliability, use a working machine to download Windows Defender in offline mode.

  Download the 32-bit version or 64-bit appropriate here http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline?SignedIn=1&SignedIn=1 and burn a CD. Boot from the CD and run a full scan.

• Startup Repair tool - windows cannot repair this computer automatically sqpzkzio.sys file is missing or damaged

  Vista was working fine on my Acer laptop - then just started the statement he tried to fix it but couldn't.

  I don't have an installation disc that Vista has been pre-loaded - tried to repair a Vista disk from another computer without success - to where/how can I fix this missing or corrupted sys file?

  Have you tried any repairs of bcd as mentioned in other posts without result

  wroteIs "ajdunn" it is possible to get this file somewhere and
  replace the existing one?
   
  Just delete it! -It is 99.99999%certain to be malicious
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK