Cannot install 1 file

Similar Questions

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570

  I have Windows 7 Professional upgrade disk. I select custom installation. the trial ends approximately 54% then displays this message: Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570 do - what I do?

  try to install by removing a strip of memory (RAM) If you have 2 stick of ram installed.

• Windows cannot install required files 0 x 80070017

  I was unable to install the Vista SP1 on Compaq Presario laptop. I bought the professional vista with sp1 and tried to install it, but the following message.

  Windows cannot install required... files error code: 0 x 80070017

  I tried to format the drive, but the power lost along the way, but the error came both before and after calving.

  The bios does not have the ability to set the drive sata to DCIS or gives it the possibility of the enslavement of the DVD on the HARD drive... any suggestions?

  Hello

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Cannot install the files .exe or Windows updates, "you may not permissions appropriate to access them.

  I completely downloaded from the internet does not run or install .exe files. I get this message: Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you to them.

  Also, I can't get updates to Windows, such as Windows Defender. And even if I manually downloaded updates, always I can't install them.
  Help, please.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

• Cannot install download files on the generator on new glassfish

  Hello
  Running Application Express 4.1.0.00.32 on Oracle Glassfish Server 3.2.1. Our new facility is in place and do us our applications up and running for the most but with a weird thing. We cannot transfer all files on the generator of the Apex, for example an image or an export request export. After navigating to the file by clicking 'next' in the Import Wizard generates a message "the file must be selected for upload" and the path specified just disappears from the display.
  
  Sorry to post on the forum of listner, but it "feels" as a kind of a problem of front end with the new facility. Others post similar topics on the forum of the apex and say: there is a bug in glassfish How to transfer files to the apex
  
  This post refers to the other off the coast of the Forum post where you can download a patch of glassfish. But hey, I'm paying for an official Oracle glassfish, I must post an sr for this?
  
  
  
  Thank you
  Steve

  Hi Steve,.

  We have discussed this here even before the thread you referenced: {message identifier: = 10205967}
  Of course, this fix is intended to be used for GF OSE, not the version with support.

  But hey, I'm paying for an official Oracle glassfish, I must post an sr for this?

  That's how you get help for this. Maybe "My Oracle Support" (formerly known as Metalink) has already a bug filed for this and an official patch to download. This forum is not intended to replace or duplicate content published by the official product support.
  On the other hand, your version number seems inaccurate: the most recent Oracle GlassFish Server available today is 3.1.2.2. If you are running on 3.1.2 you must download the Patch 147904-06 (assuming that you are on Linux, get the patch for your operating system if it is different). This will update your GF in 3.1.2.2, which is what Oracle Support will usually ask you to do if you open a service request for a product running on an older patch level.

  -Udo

• Windows cannot install required files. File is possibly corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code 0 x 80070017

  Try to install vista to a friend after that one completely uninstalled.  I start to install and then stops and says file corrupt or missing.  Error code 0 x 80070017

  How to clean install Vista:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install .exe files

  I hope someone can help me with my problem of laptop. I struggled for 4 months with not being able to install some .exe files, especially of the antivirus programs, still the same error: Windows encountered a problem with this file, Unknown Publisher

  The problems started with Vista: arrested Norton running Liveupdate, so I was without any program antivirus for awhile, picked up a virus. I had it upgraded to Windows 7 (own update) at PCWorld, the problem persisted.

  I contacted the technical support from Microsoft, who got back to me and they were brilliant ringing me back every night of the week last to try to find a solution. They helped me to do a clean install, after that, I immediately tried to reinstall Norton, no luck. Still will not install some .exe files.

  Keep Office updates fail with the error code 080200053. PCWorld can not deal with me that I reformatted since their upgrade. Suspected Microsoft support the strange behavior to block .exe files indicates a virus. I paid for a Norton virus removal service. They worked on it for 5 hours, cleaned the system, but could not reinstall Norton. They think that it is because of the failure of that updated Windows. But I do not understand that if there is no office updates had to do with a block on Norton!

  I decided to forego Norton and tried to download Kaspersky, failed. Then another go to Avast, failed.

  I managed to download and install Acrobat Reader and Google Earth after about a 100 attempts, is not a global block on the .exe files.

  PCWorld verified the hard drive, no problems. Toshiba will deal only with material, both pointing the finger Microsoft software. Say Symantec Microsoft say it is a virus, there is no virus, this is the Windows updates.

  Where should I go from here, I'm going in circles! My laptop has just developed a one-of-a-kind problem that nobody knows the answer to? I searched the internet upside and tried all possible troubleshooting suggestions. It cost me more than 200 books to date for updates and deletions of virus, etc. The doomed laptop was far too expensive to just throw it in the trash, but no one can fix it!

  Can anyone suggest a solution?

  
  This problem occurs if the .exe in the registry file is damaged. This behavior is usually caused by viruses; one of them is the SirCam virus, which change the .exe file association in the registry.
  
  Source: http://windowsxp.mvps.org/exefile.htm

  @ildi: If the above solves your problem, either you did a Windows repair installation or you did a clean install, but the computer was infected again shortly after (through, for example, already infected flash drive or SD card, another computer on the network, or your backup data).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. "Error code: 0x8007045D.

  When I tried to do a clean install of Windows 8 Professional 64 - bit, the part that says "Put into files ready for installation" goes by about 1% every 20 minutes. After hours of waiting before it ends, the error in the title always occurs at about 70%. How can I fix?

  In fact, I could solve the problem. It turns out be the problem of the DVD player. I tried to download the ISO on a USB key and it worked.

• 16 AIR cannot install the file API product

  Hello

  I have a problem with the new LOOK 16. I'm not able to install files IPA produced by this version, installation always hangs and must be cancelled.

  

  My device is iPad, iOS 5.1.1 PC Win 7 x 64 + Flash Builder 4.7. I tried the two stable 16.0.0.272 and Beta AIR 16, the problem is always the same.

  I tested all my projects and all have exactly the same, I even tried to create simple Hello world package and it also has the same problem. I also tried to get new mobileprovision, but the problem is the same.

  If I switch to any previous air (13 / 14 / 15) the package can be installed without a problem and works fine.

  Thanks for the info,

  If needed I can provide examples of projects etc.

  Jiri

  I emailed with Chris Campbell about it and he said they dropped support for iOS 5 a year ago. However, I and others have been able to compile the files IPA which works wonders on the original iPad up to the latest versions. Even early versions of 16 AIR works great on the iPad 1.

  He said that he would ask for more information and get back to me. Hope he can clarify this point and that support can be back in because the transition to 64-bit should still support 5.1.1 iOS which is what iPad 1 is running.

  IPhone 3gs and iPod touch 4 still work very well with iOS 6 and like the iPad is on the same hardware wise, it should always be supported.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install any os in a hp pavilion dv5 - 1120ev

  Hi, my friend has an hp pavilion dv5 - 1120ev, he had top, pre installed windows vista. He asked me that if I could make the computer faster, so I told him, of course, you need to change OS to do this, you must install windows 7, I said. So I took with me, put windows 7 dvd, boot from the cd/dvd drive, deleted all partitions, even the recovery partition (I didn't know it came without a copy of disk recovery tools), partitioned the drive into 2 two new partitions, formatted and continued to install the os on the primary. The dvd that I used has all versions of windows 7, 32 and 64 bit, tried all, it gets stuck on the process of expansion, to 0% files (only with one version, she was 14%, I can't remember which), and it gives me the "windows cannot install required files. the file may be corrupted or missing. "Sure... error code: 0 x 80070017. Then, I tried with another dvd with winodws 7 ultimate, same thing. I also tried with the disc do not split into two, one partition, just in case windows is having problems expanding all of the files, just in case, same thing. Then I thought it was a bios thing, he had to be updated, which to be honest there cause of the version it is F.0C, and in the support section of the hp site, I found a newer version of it, which is also described as necessary for the latest operating system upgrade. I thought wow, that's it, I found it, I will upload a version of it bootable, version bootable cd to be precise, cause the bios version there back does not support booting from usb devices, I'll update it and install the operating system. NOPE. The site has an exe of the bios version. I tried to make a disk bootable with the bios in there (with the option of nero boot disc), I guess that I've not done it right, it could be a solution, but I could use some help on this. I also tried to install windows xp, so that I can install it the update of the bios, the same thing, I get the same error, only with the old blue sceen scholl. Finally, I tried to install windows vista Home premium, just in case the bios for a reason any has only accepted this operating system, no way, same error again! So now I'm not stuck wth no operating system, a pc unusable, nothing can be installed on it. I asked my friend that if the cd/dvd drive had some kind of problem, he said, had no problem with game discs, their loading and installation of games. Please HELP I don't know what to do! Thank you

  Nevermind, I managed to solve the problem by taking the hard drive, put it in another phone and the windows installation, then put it back. It worked like charm, so the problem is 100% on the DVD player.

  Thank you

• Installation of Windows Vista disc will not re - install. "files required for installation are not available" error 0x8007045D code

  My computer is slow, so I decided to format the C drive and re - install Vista with the installation disc. I did it once before and it worked. This time, however, I tried to install it and once he got to the 'Copy files' section and "Expanding files" error message came up saying: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D

  I tried to restart the computer, and restart the installation, but nothing does.

  I need your help please!

  It's an IO error.  Try to wipe the dvd with a soft cloth and then try again.  The drive itself may also need cleaning.

• BlackBerry Smartphones failed to install IsKernel files

  Hello world

  I'm trying t install BBDM ver 4.2 on my PC (OS Win Vista Home basic SP1), but its gives me the err:

  1: cannot install the files IsKernal. Make sure that you have privileges on this machine...

  How can I fix this problem? Please, I beg you. help.

  I found the solution for above, disabling UAC in user accounts. Restarted the PC and released running the installation and it worked.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K