Cannot install ACR 5.6 update on CS4 64-bit

Similar Questions

• Cannot install the pkg of update for the windows client, I get error code0x8004ff84

  I get error code ox8004ff84

  Hello

  Method 1:
  You can read the following article.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461
  Method 2:
  You can read the following article.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. See the following link for more information.
  http://support.Microsoft.com/kb/322756
  See also:
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
  It will be useful.

• Cannot install Windows 3.1 updated through Windows Update, error code 0x80070005

  Running Windows XP Pro on a MacBook Pro running OS 10.7.3 and Parallels 7

  Attempted to execute systematic of Windows Update, who told me that I needed to upgrade "of the components' Windows Update

  When I click on the "Download and install now" button the Windows Installer 3.1 download fails, with error code 0x80070005

  Any suggestions?

  Hello

  -Have you logged as administrator?

  Your problem may be related to authentication.

  I suggest you to follow the steps in this article and check if it helps.
  You cannot install some programs or updates

• Cannot install Service Pack 2 update on my Vista 32 bit computer. (error 0x800f0818)

  original title: cannot install Service Pack 2 update on my Vista 32 bit computer

  Through the windows update install Service Pack 2 and keep getting error 0x800f0818.  Have run fixit and the tool of analysis, but always in error.  Looked this error but can't find anything about it.  How can I fix it?

  I think that what PA bear is coming in the post previous is that service pack will contain Vietnamese Windows updates necessary for their release.

  A little/sorta...

  KB2555917, KB2507938, and al. (which dates from July 12, 2011 & before) would have been the last installed if updates Vista SP2 is not installed yet.

• Cannot install Creative Cloud desktop update and complete software lost

  Cannot install Creative Cloud desktop update and complete software lost

  Hi Titanouk,

  Besides what % Rajashree 20Bhattacharya suggested you can also make reference to: error "Unable to install" received when installing Adobe Creative Cloud desktop App.

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• Cannot install error code Windows update 9 48

  Original title: I'm unable to install the windows explore 9 9 48 error code

  I can't install the windows explore 9 9 48 error code

  Hi Mario,.

  Thanks for posting in the Microsoft Community.

  According to the description provided, looks that you can not install the update to Windows.

  It would be awesome if you could answers to these questions in order to help you further.

  1. are you referring to Windows update?

  2 have you made changes on the computer before this problem?

  3 is confined with any particular update?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Note: The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Note: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Cannot install KB2645640 via Windows Update. (error code 80073712)

  Original title: cannot install KB2645640.

  * error code added to title *.

  When you run Windows Update I'm unable to install KB2645640 with error code 80073712 marked.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  Windows Update error 80073712

• Cannot install Java Version 6 Update 17

  Original title: Java problem!

  I need to run a payroll Web system and it needs of Java version 6 update 17 but my computer won't open the web page. I already disable other versions, restart the pc, download the right version several times and nothing! Any suggestions? I have version 32-bit windows XP my antivirus disappeared and the firewall its judgment too don't know not what else to do

  Hi Vanessa,

  1. What is the name of the site?

  2. you receive an error code or message?

  3 is confined to a particular Web site or all Web sites?

  As you have disabled the other versions, I suggest you to other or old versions of Java to uninstall and install Java Version 6 Update 17 and check the issue.

  Please follow the links below:

  How to uninstall Java on my Windows computer? :

  http://www.Java.com/en/download/uninstall.jsp

  I hope this helps.

• Cannot install Windows in bulk updates

  After a major update (back to top), my computer will only install updates MS 131and I know there are more than 100 more, they have obviously downloaded but have NOT installed. For updates they show has failed, and in the updates installed, they are nowhere to be found. Does this mean "that they have been downloaded, but NOT installed?"  Because I continue to check the updates because I know they are NOT installed and it telling me there is no. To download more than 100 updates one is ridiculous, if it can still be done. After the update it downloaded 1.5 GB of MS updates and the other half has failed. I don't have a choice on my date of restoration, a mouse driver crashed, so the update was important. And the next day he downloaded more than 100. "Should I download these one? If Yes, I switch to Apple.

  Original title: amount of updates

  Hello

  I've seen a number of messages about this problem, so I spent the evening reload an image of two year, perform a new installation of Win 8 who had never had Windows updates...

  For the most part just out of curiosity I guess... and the fact that you mentioned 200 + updates that seemed much too much for me.

  There were 109 updates for my machine. After installation of these groups, I checked once again more updates to Windows, and there is more than 18... A couple less than your total actually. And after checking again once there is no more...

  Your total of 131 is probably correct... I think that you have a gap in your numbers it's because a lot of the first failed and redownloaded again.

  If I go on my updates installed page, it lists 137, even if I downloaded only 127...

  This is because some updates are 'Cumulative' who have more than an update of the package.

  I don't know if I mentioned this in another thread or not, but don't try to do all the updates at the same time... It SHOULD work, but according to the actual updates, they can actually interfere with each other.

  Especially if the .net Framework updates are included. .NET 3.5 in particular. This issue has been much come on the forum, and I'm little tired of repeatedly typing, so I wrote a few notes...

  This is just my opinion, for what it's worth, it's here...

  I just did a test installation 109 updates Windows in groups. All groups have continued the installation process even if they were supposed to be finished, and showed the RESTART...

  You must run the Task Manager to see this.

  I did thirteen .net Framework 3.5.1 updates totaled 206 MB. At least 20 minutes after the RESTART appeared several process continued to run.

  Because I have an application that displays all internet activity, I have seen that Windows Installer would go several times, and when it ran, it would trigger a download of a certain type.

  Two other processes that are running are Windows Module Installer and Windows Module Installer Worker.

  In Win 7, they are called "mscorsvrs" and after you have installed a .net Framework update there are sometimes up to three who take turns running. The best I can describe their function, they're afflicted a compiler.

  Even if the installation is supposed to be completed according to Windows Update, it is not. Not until the end of the process...

  This is the source of many problems with the updates of Windows not... Over the years, I saw countless times in which an update failed after that these processes started to run... To the beautiful environment of the rest updates.

  It's the sequence, I used to install updates 109 @ 1.22 GB on a computer where Windows Update had never been performed...

  Group #1... @ 128 MB's malicious software removal tool and Windows Defender... Then restart

  Group #2... Graphics, internet explore ActiveX

  (Updates of seven first in the list before the .net start) 7 @ 188 MB...  Then restart

  Group #3... .NET framework 3.5.1...  13 @ 105 MB...  It took about 20 minutes for the CPU go to zero before rebooting, as mentioned above...

  Group #4...  .NET framework 4.5...   11 @ 162 MB...   It took about 45 seconds for the CPU to zero before the reboot even if reboot was not required.

  Group #5...  Updates to security...   45 @ 105 MB...     Once again, reboot only after zero CPU

  Group #6...  Important updates...  30 @ 419 MB...     Once again, reboot only after zero CPU

  After installing the first 109, I checked for new updates, and 18 were found @ 579 mb. None were .net Framework... All were successful.

  I actually did this process twice to check it again and with no failure... He managed both times.

  BTW... I have 1.01 GB of updates of Windows to be 'cleaned '... This does mean that they have failed. What is cleaned is the old files that have been replaced and the left on the packages that are no longer needed.

  Kinda like your TEMP folder where a large number of programs store the installation files... After a week, disk cleanup will allow you to remove...

• Cannot install ACR 5.7! Help, please.

  Hello

  I have CS4 Production Premium with Mac OS X Snow Leopard.  I had trouble with PP CS4 so I deleted and reinstalled. When I re-installed, I've updated all programs Adobe Updater.  Everything has been installed except for two things - ACR and Adobe Output Module update (see below).  So, I come back in Adobe Updater and repeat the update with these two things.  He repeats to me we would have dl and installed.  But when I try to open a RAW D300S, he says that the file is not compatible.  I went in 'About' ACR settings, and it shows it has not been updated (see below).  I tried to reinstall everything again and this error continues to be.

  How can I fix this, please? I would be very happy any help you might be able to offer!

  Thank you.

  

  loyalty4life wrote:

  How can I fix this, please? I would be very happy any help you might be able to offer!

  Go to Camera Raw updates Mac and download and install Camera Raw 5.7.

• Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

  I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

  I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

  http://img94.imageshack.us/img94/5003/updatesl.PNG

  For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

  The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

  ###

  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
  ...
  [several other of these errors, with '2' to 36, even numbers only]
  ...
  11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

  ###

  Things I've tried:

  1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

  2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

  3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

  4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

  5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

  6. scan the hard disk for errors (e.g., check disc) - Nothing found

  7. search for viruses, Trojans and malware - do not have

  8. install with UAC, anti-virus and firewall off the coast - same result

  9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

  10. manually install them - same result

  A short circuit contact MS have exhausted the options?

  Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

  PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code: 80248009 (cannot install or check the updates)

  My computer is telling me that Windows cannot check the updates.

  0 x 80248009 WU_E_DS_MISSINGREF data bank of information is missing or has a reference to the missing license, file, localized property or line related.

  0 x 80248009 - the data store is in an invalid state, because it missing data that must be present. This will happen if we try to extract a line that is linked to another table and the related row does not exist. This can happen with the EULA, files and/or localized properties referenced by an update.

  Error when you try to use Microsoft Update or Windows Update Web sites to install updates: "0 x 80248009" http://support.microsoft.com/kb/956700>

  03/30 / 1101:36: 26 am

• Cannot install successfully: a security update Cumulative for Internet Explorer 8 for Windows Vista (KB2482017)

  I got this update listed in my window of results for several weeks.  I tried to install it several times.  Once the update is completed, I get the error code 80073712 listed.  I already followed what I could find:

  I ran sfc/scannow in regular connection and safe mode.  It is said there are files that cannot be repaired, when I watched the news I had no idea what I was looking for or for.  Aside, can note I simply delete the .log file and start with a new one?  It looks huge with dates that goes back a long time.

  I can't locate all files named pending.xml anywhere on my hard drive to delete as I've seen it mentioned.

  I tried directly download and run wua to no effect.

  Have also tried to run the system preparation tool

  I suspect, is that it has something to do with having to reactivate windows (correct term?) after a failed motherboard had to be replaced.  At the time when everything seemed to go smoothly.  I called, got the code and he came, and everything looked good.  I even had a few updates download successfully. I still get updates as defender and silverlight to install correctly.  It is this one in particular that hangs for some reason any.  Looking at the history of update some installed previous failure listed another KB article and I guess updates are "stack" that I continue to understand this?

  I have a Vista upgrade disc that does no sp1 on it, I have improved at the beginning and you read what to do a repair installation will not work with an earlier version.  I would really, really not to wipe the hard drive and start over if all this is is some files that I've screwed up somehow.

  Any suggestions?  Thank you!

  Please publish on Windows Update froum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem installing ACR 5.7 update

  I have all the programs closed when I try to install the Camera Raw 5.7 update, so I can edit photos in Photoshop CS4 with Lightroom 2.7.  Whenever I try to install, an "incomplète Installation" window appears saying ' Please close the following application and retry to continue installation of update: ADOBE BRIDGE.»  I have cleared the cache in the bridge, but I can't get this install.

  You probably have the game of Bridge to start automatically when you connect.  See the Advanced section of the preferences of Bridge.

  Richard Southworth