Cannot install all-in-one printer of 7280 to my computer with Windows 7-2010 - what can I do?

Similar Questions

• HP Photosmart Premium All in One printer will NOT work to satisfaction with Windows 7, HP has been disabled

  Windows 7 is causing problems with photo printers?  I had so many problems the photosmart HP printer wireless installation.  Whenever it has been installed, the next time I arrived, he would say "cannot find printer.  Best buy told me to NEVER install wireless immediately and later another told me that Windows 7 seems to have problems with wireless printers.  Called HP, they wanted me to install new drivers and then I got fatal errors to try this.  Finally, they had a legal person of HP contact me to tell me that the fatal mistake had to be caused by the problem of WINDOWS 7.  I had to restore to the day, I bought the computer, which was fine because I didn't really have anything worth saving, just a few documents.  When I did, everything seemed OK but I tried to scan a picture and there were points on this subject.  I scanned the same photo to another computer not windows 7 and without stains.  New HP denounces Microsoft Windows 7... saying that it doesn't have the same problems as Vista did, but a WHOLE NEW CLASS of problems.  Why are they not being found and fixed by Microsoft problems?  It's so frustrating, I abandoned and resumed the printer at Best Buy.

  SOMEONE DOES HE HAVE PROBLEMS WITH THEIR PHOTO PRINTERS WORKING ON COMPUTER WINDOWS 7?  IF NOT, PLEASE SHARE WITH ME WHAT PRINTER/SCANNER, YOU HAVE, I WANT TO BUY A SIMILAR ONE.  I won't buy another HP for what, the customer service was poor, 12 hours on the phone and nothing has been resolved but blame Microsoft.  Life is too short.

  Have you tried the printer connected directly to the computer to see if it works correctly? This can help to identify what you need to solve the problems.

  Manufacturers of devices, in this case HP, are responsible for providing drivers for their equipment work. However, the end user is responsible for installing the drivers correctly. In most cases of printer drivers must be installed without the printer is connected to the computer and only connected and turned when prompted by the installation program.

  Also, during installation it is recommended to close all unnecessary programs that are running before installing drivers, and once installation is complete, make a restart.

  I have three printers on my system - two, a Canon Pro9000 and a HP DeskJet 970Cse printer (about 10 years) are directly connected to the main computer and have never had any problems. The third, a Brother color laser is connected through a network and is running smoothly. I do not use all-in-one printers and have a separate HP scanner.

  Depending on the type of team service geek places are concerned, you would be better to go to a computer repair shop and to solve this problem for you.

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• Scan HP PSC 1410 all in one printer works well, does not work with Win XP SP3

  I am well satisfied with my computer HP 2006, Win XP SP3; However when I had to reformat the HP PSC all-in-one printer that works well will analyze any more.  Microsoft says that it does not recognize the drivers for the scanner.

  Try to download software and software updates of the HP Web site.  See if that helps.

• I have Photoshop CS6 extended that I bought as a student in 2012. It comes with a disc for loading. I loaded it on two computers. One of my computers is gone belly up so I had to buy a new computer with Windows 10. How can I reload the program?

  I bought photoshop CS6 extended as a student in 2012. I loaded it on two computers. A computer went belly up last week and I bought a new computer with Windows 10 on it. How to load the program on my new computer. I have the DVD disc. How can I got to talk to someone at Adobe? Don't they have any live support?

  Hi wayneharder,

  Use of the download link for Photoshop CS6 Extended below.

  Download Adobe Creative Suite 6 applications

  Once the application is downloaded and ready to install it, need you the serial number to activate it.

  If you already have a copy of one of them, then it's fine, otherwise check out the link below to find your serial number registered.

  Find the serial number of your Adobe product quickly

  Kind regards

  Mohit

• PSC 1315xi All in one print in color instead of black on windows 7 and 8

  In our House, we have three computers: two laptops, one running windows 7 and one running windows 8 and one desktop running windows xp.

  On our office it prints fine, but on two laptops when trying to print black text Print instead in a grayish blue color. I am trying to print in color works on all computers. Or ink cartridges are empty.

  As he works on the desktop, I guess it's a driver issue, but I can't find a solution.

  Hello

  What ink cartridges you actually have in the right slot of the printer, a black cartridge 56/27 or a 58 Photo ink cartridge?

  The supplied sample occurs even if you have a Photo cartridge in the printer...

  With the help of a cartridge Photo is not intended for printing the text in black, but for printing Photos and will not have a gray color effect...

• Cannot install Ubuntu 14.04.2 on Acer Aspire E5 - 511G with Windows 8

  Hello. I have tried everything I can to install Ubuntu 14.04.2 alongside Windows 8 on my laptop and I'm not going to be successful. I have Ubuntu on a USB key, and whatever I have, I get the message "the system has no USB boot option." So far, I have:

  -Disabled the quick start.

  -Disabled Secure Boot UEFI firmware settings.

  -Tried to set the USB FDD and USB HDD at the top of the order of priority of Boot and Windows Boot Manager to the lowest priority.

  These measures appear to allow most people to access Ubuntu on their flash drive, but it does not work for me. Anyone know what I can try? Is there anyone here who has the same model and who has installed Ubuntu?

  If USB is not, probably you did not create a proper EFI bootable USB.

  Rufus allows you to create a bootable USB flash drive, selecting only for UEFI system.

  http://Rufus.AKEO.IE/?locale=en_US

  Please re-enable secure too boot.

• cannot read the cd after the data of bury. another computer with the same operating system can read

  Windows XP

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Canon LASER CLASS 510 all-in-One Printer

  Is there a driver Windows 7 for my old Canon Laser Class 510 printer all-in-one? I have a new computer with Windows 7 and cannot get my Canon 510 to work.
  Thank you.

  Hello

  1. What do you mean exactly by 'cannot get my Canon 510 to work.'? Can't recognize on Windows 7 or is unable to print?

  2. do you get an error message?

  I would recommend that you visit this site, download and install the latest drivers for your version of Windows 7 and check if that helps.

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• Where can I download the driver for a HP Photosmart C5550 all-in-one printer?

  Send me the link that will allow me to install all-in-one printer, HP Photosmart C5550

  Here is the link to the download site to Support HP Photosmart C5550.  Select Windows 7 32 or 64 bit, and then select the ' full software functionality and "download the drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3577718&LC=en&cc=us&DLC=en&lang=en&cc=us

  How do you know if you have 32 or 64-bit: http://windows.microsoft.com/en-US/windows7/find-out-32-or-64-bit

• HP Officejet Pro 8500 has compatible with w2k8 R2 e-all-in-one printer drivers and XP clients.

  Hello

  I am looking to buy one-

  HP Officejet Pro 8500 has e-all-in-one printer (CM755A) - for our Organization, we use Windows server 2008 R2 Standard 64-bit with XP clients and wanted to know if this printer is compatible with w2k8 R2 drivers?

  Looking forward to hear from you.

  Thank - you

  It is compatible, but what I recommend is to get a newer version of the 8500 which is 8600

• HP 3520e all in one printer, power supply problem

  Recently off my 3520e all in one printer when you go away, come back after 2 weeks and can't turn it back on.

  All the cables are connected and power is available, but will not turn on/off button.

  Ideas please

  Hello John-FB,

  Please click here to access document that should help you to solve the problem.

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• I need to install Dell 968 to a computer with Windows Vista. Need instructions on how to do it.

  I need to reinstall a Dell 968 printer/scanner to a computer with Windows Vista. I can't find my instruction manual. Can someone tell me what to do? Printer works but when I scan something, the information does not go to the computer so that I can work with it.

  Hello

  Here are the drivers for your printer

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A968&OS=WNT5&OSL=en&CATID=&impid=

  and here's where to download this manual for her of

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml