HP 3520e all in one printer, power supply problem

Similar Questions

• 3525 Deskjet printer power supply problem

  Brand new printer, I have been connected, printed OK. Once off, lights not again unless you pull on the power cord plug, then plug it in yet. Then can be turned on. But once off so the same problem all over again. I tried different plugs/Sockets, same problem with them all. Same thing happens when the printer is connected to the electric network without being connected to a laptop Desk/computer. Is this a power supply problem? Is it not ridiculous to do out of the box?

  Thanks for any help,

  Nicholas

  Hi Nicolas,.

  The latest firmware should solve the problem you are experiencing.

  Download and install the update of the firmware for your operating system below:

  32 bits:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128070-2&cc=us&DLC=en&LC=en&OS=4157&product=5241265&sw_lang=

  64 bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128071-2&cc=us&DLC=en&LC=en&OS=4158&product=5241265&sw_lang=

  If the printer connected to your PC via the wireless network and the update fails to install, connect the printer with a USB port in order to complete this update, or update your device from its screen as follows:

  http://support.HP.com/us-en/document/c03250770

  Kind regards

  Shlomi

• HP PSC 1510 all in one printer power button flashing key.

  The power button flashes. No other lights are on.  I can not turn off the printer.

  Hello Laureldawn,

  I see this is your first visit with us here on the Forums of HP. Please, let me take a moment to say 'Welcome. '

  I have some suggestions that we can try when troubleshooting flashing lights on the printer.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and NOT a bar/power strip.

  Here is a document that uses a LaserJet printer for example, but it is intended to be used by HP products in general.  This document explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Another step we can try is the document the Treaty of lights flash.

  Please let me know whether or not these measures have helped.

  If I don't hear from you today, I hope you have a great Wednesday.

  See you soon,.

• E-all-in-one printer WiFi problem 3520

  Product name: 3520 e-all-in-one printer

  WIFI problem ofline whenever we want go print

  I bought a HP 3520 printer e-all-in-one, cause it can print ussing WIFI. But I am very satisfied! Whenever I want to print, the printer go to ofline and is not able to perform the task of printing sent from my laptop. On my laptop, I have windows 8 and I installed the right driver. Yet he expect regeister once more my printer and install the driver all over again before finally seeks to print. For me with the amount that I have to print this is does not work!

  I'm regretting that a lot i let the salesperson talk to me by buying a Hewlett packerd. Because I have this printer now a little more than six months and already want to trow I have a very high roof. Previously I also had bad experience with a Hewlett Packerd printer!

  Hi idebont,

  If you haven't already done so, please run the PSDR.  Find and fix common printer problems using the tools of diagnosis HP for Windows?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  This ensures that the printer is full on and can help this situation.

  We need to know if the printer or router is to lose the connection.

  You have a flashing wireless to the printer when you try to print from the computer or is the light solid?
  If it is flashing then the printer tries to find the network.
  If the light is solid, it is on the network. Try to print from a mobile device, if they are configured at the printer.

  Print a configuration page to see if the printer has a valid IP address.

  Printing a Network Setup Page.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  You can access the Web server integrated for the printer when the printer is in offline mode on the computer? (EWS)

  If you have a valid IP address and you can access the Web server integrated for the printer, then perhaps changed the IP address assigned to the printer to the router. So the origin of the computer does not find the printer. (setting up a static IP will solve this problem)

  Check the port showing on the computer to verify that it matches the IP address of the printer.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click on configure port to display the IP address.

  If the IP address does not match, and then create a new port with the new IP address.

  Close the port to configure.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

  Original title: cannot find the printer

  I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

  the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

  software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

  This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

  Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

  anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

  operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

  told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

  If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

  My thanks in advance

  Peter

  Hi Peter,.

  Thanks for posting this question in the Microsoft Community.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any security program installed in the computer?

  2 what Microsoft FIXIT did you use exactly?

  I suggest you to install the drivers for the printer and check if it helps.

  You can also go through the steps in the article and check.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• All-in-one printer, HP OfficeJet 6210xi crippled

  I installed my portable printer all-in-one OfficeJet 6210xi more than 4 years ago. Everything worked well. About two years ago, I replaced my PC with WinXP Pro's home computer. Everything worked well. A few months later, I bought my wife a printer wireless HP DeskJet 6980 for his iMac. The installation was easier to run from my XP PC, so I have installed the software on the iMac and the XP PC, was the game of the XP PC then both the iMac and PC XP have been able to print to the HP 6980 wireless and the XP PC has been able to use all functions of the 6210xi all-in-one printer.

  Whenever there is a dialog box informing me of a software update for each printer on the XP PC or iMac, I accepted the update. Everything worked fine until a year ago, then the XP PC locked up in the middle of the scan of an image from the 6210. He had no other choice but to keep the power switch of the XP PC until the shutdown of the PC. "Windows Task Manager" can complete the task.

  When I rebooted, I got a message that Windows did not find file HPSoftwareUpdate.msi. I used Windows 'Search' to find the file, but the message rejected this file. For weeks, I have ' X'ed ' on the box dialog at every reboot and everything still worked fine, but one day, when I was offered a software update and I could not receive it. The company said that it lacked HPSoftwareUpdate.msi.

  I googled the problem and read that I have to uninstall and reinstall the HP software for the 6210. No help. I lived with the problem because everything worked fine, except that I could print is no longer to the XP PC HP 6980. The iMac has worked well with the 6980.

  Then the problems started. At the start, after that my desktop I get a box titled "Windows Installer", and then a second box: 'Please wait while Windows tries to configure library', then a dialog box "the feature you are trying to use is on a CD or another removable disk that is not available. Insert the disc of the photo gallery and click on OK. There is a drop down menu to 'Source '. If I try to 'Browse' the first thing that appears is the PhotoGallery.msi file in the folder C:\Windows\Hewlett-Packard\Setup Files Software Update\. I tried to click on the PhotoGallery.msi file, and I get a message that "the Update\PhotoGallery.msi C:\Windows\Hewlett-Packard\Setup of HP software is not a valid package for photo gallery. Try to find the PhotoGallery.msi installation package in a folder from which you can install Photo library". I tried to use Windows Search to find all other instances of PhotoGallery.msi, but I get the same message when I click on them. I tried to use the CD supplied with the printer. No help.

  I get an "error 1706. No source is valid for the product photo library is not found. Windows Installer error message cannot continue"when I exit the installation/configuration process. I have to cancel the process about 3 times before he left.

  My printer works fine as a printer and I can copy and FAX from the console of the printer, but whenever I get one sheet to FAX or copy, I get a warning sound and a message that the there is a problem.

  If I open "Image area" to try to scan a photo or a document, my albums are all absent and when I complete the scan, I get the same series of messages as when I reboot. The biggest difference is that the ongoing process of trying to repeat no matter how many times I Cancel. I have to use "Task Manager" to the "end task".

  I uninstalled the 6210 software and reinstalled several times. I used the CD that came with the printer and also the last driver downloaded from the HP Web site package. I uninstalled the software HP 6980. Nothing seems to make a difference.

  I think I have one or more of the following problems:

  #1. There is the uninstall process does not remove the files
  #2. There are registry entries that I need to remove
  #3. There are files for the HP 6980 in folders where there should be files HP 6210

  Does anyone know how to get all relevant files, registry entries and HP off my PC, apart from reinstalling Windows? I need to reinstall the software as if it was a first time install.

  FreddieVee

  First I ran the file gr_uninst.exe http://h10025.www1.hp.com/ 4 times. Then I ran msicuu2.exe the "Windows Installer CleanUp Utility" (I have the link that you provided = http://support.microsoft.com/default.aspx?scid=kb;en-us;290301) and finally I used the EasyCleaner Registry Cleaner from ToniArts v2.0.
  
  I decided to use the three programs rather one and then re-install and hoping that all this work.
  
  After re-installing, using the last package of driver for my printer HP and the combination of the OS, everything works like new.
  
  Thank you for your advice,

  FreddieVee

• HP Photosmart 5520 All in One printer cancels an order of copy of the glass

  HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

  I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

  I used the doctor scanning HP and installed my printer again, but that has not helped.

  RodeDraak

  Hi RodeDraak,

  Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

  Issues when connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• 4630 HP e-all-in-one printer cartridge change

  Recently bought a HP 4630 e-all-in-one printer. When the black cartridge needed evolution for the first time I have been unable to get printing to work again.  It displays the message «the following ink cartridges need to be replaced...» "followed by a symbol of glass side means time.  I replaced both black and color cartridges, and they are both the correct number (61) for the printer.  No help available?

  Hi john1936,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with the printer and ink cartridges.  I have found a document that will resolve this problem. Please note that the title of the document does not list the error you have however it will solve the problem at hand.

  Please click on the following link that deals with a "missing cartridge", 'cartridge problem,' or "not compatible ink cartridges" Error Message is displayed on the control panel.

  I suggest also that if you have the printer power cable connected to a bar/power strip, please remove and connect it directly to a wall outlet. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.  This document is generally for HP products even if a LaserJet printer for example the cottage.

  Please do not hesitate to write again for any further assistance.

  Thank you for your time.

• HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

  How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

  Hello JoshSimon ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer printing before you print a test page.

  If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

  Once a print job is sent to the printer it then wake up and do the task at hand.

  In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  See you soon,.

• E-all-in-one printer Officejet 4630

  Hi guys,.

  Just need advice on power on my Officejet 4630 e-all-in-one printer new

  We purchaced model in my client and - Best Buy Canada want to take Europe a few weeks

  -in the manual of the printer:

  http://h71016.WWW7.HP.com/HTML/PDFs/B4L03A_HP_Officejet_4630_e-all-in-One_Printer_R4.PDF

  Required power supply: input voltage: 100 to 240 VAC (+/-10%), 50/60 Hz (+/-3)

  parameters such as must work in Europe

  But:

  AI mentioned energy consumption:
  15 maximum watts, 12.5 watts (active), 3.2 watts

  Power requirements are based on the country / region where the printer is

  sold. Do not convert operating voltages. This will damage the printer and void the warranty of the product. Energy consumption in sleep mode depends on the ability of customer network switching, user configuration and network activity

  Power cord included in the package as written now it supports only 125 v

  At the same time power can support up to 240V

  Need to buy cable only?

  Cord of origin with a European plug adapter will work not in Europe?

  Appreciate all the answers

  Igor

  Hello

  One of the following cards will work. You should also bring with you, inks , inks of European countries may not work with the printer of the Canada

  http://www.world-import.com/plugs.htm

  Kind regards.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP 5740 all-in-one: print HP 5740 Air has stopped working

  Well worked for 8 weeks, now when I try to print a page of reception or what ever, it shows all the print pages option, shows the name of the printer, but nothing happens to the printer if I ping the printer, it will not receive all the packs to date, the router receives all packets, I printed out the Page of Configuration of HP network , it showseverything turned on and connected.

  Hey @jmichaelmcf,

  I see you have some problems with your Mac OSX 10.11 machine printing to your Officejet 5740 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. Once done:

  1. Turn off the printer and the Mac.
  2. While the devices are turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer and the Mac.
  4. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  5. Hold down the CTRL key and click the icon of your printer on the left.
  6. Click on reset printing system.
  7. Click on the button "+" at the bottom left.
  8. In the window that appears, select your printer in the list.
  9. Click in the box next to and select your printer from the list.

  Please let me know the results of the rest of the foregoing. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.