Cannot install ESXI 5.5 HP 3500 PRO series

Similar Questions

• HP 3500 pro series: cannot install Pcie adapter

  Hello

  I have hp 3500 pro series and that you can not install adapter Pcie (lcs - 6322 m). I'm trying to install the driver for this card and, in "Device Manager" be a problem with this device (yellow exclamation point)

  Kind regards

  I tried, but without hope. I bought a USB cable and series and solve the connectivity problem.

  Thanks for the interest!

• Cannot install adobe flash player on macbook pro

  Cannot install adobe flash player on macbook pro. Setup automatically runs through Matlab as default program. What should do?

  I don't really know what is "MatLab", or the ".mdlp" suffix, or why it is added.

  What is the file size of the downloaded install_flash_player_11_osx.dmg.mdlp file?  It should be 18,005,202 bytes.

  If which is, I would try to simply rename the file (removing the suffix ".mdlp"), then try running it.

• Failed to load lvmdriver error on install ESXi 4 on a XP pro 64 - bit SP2

  I get the following error on the ESXi installation on the boot cd: "failed to load lvmdriver" (after he went through the installation process of the workload does ' t program).

  ESXi cannot be installed on a machine pro 64 - bit SP2 XP (wih virtualization enabled in BIOS)? What are the requirements for hostsystem material and BONES?

  I want to use it for a productionenvironent,

  In this case, you need to install ESXi on a bare metal system.

  And the system must be in HCL if you want to use for production (just to be sure that all can work):

  http://www.VMware.com/resources/compatibility

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Cannot install the upgrade to Windows XP Pro SP1 of Windows XP Edition family with Service Pack 3.

  Cannot install upgrade

  The home computer has Windows XP Home (pre-installed) Edition with Service Pack 3.  Buy XP Pro SP1 update.  Can not install the upgrade, get the message: Setup cannot continue because the version of Windows on your computer is newer than the version on the cd.  I tried method 1, 2, 3 and 4 on how to remove Windows XP Service Pack 3 from your computer.  None of these methods works.  Y at - it software to locate and Uninstall SP3 so I can install xp pro upgrade, that I bought?

  Hello

  I suggest to Uninstall SP3 and retry the upgrade. When the upgrade has completed, you can download the latest Service Pack.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Restart the computer after the uninstall is complete and retry the upgrade.

  Important: Make a backup of your data before you uninstall the Service Pack.

• Cannot install ESXi 4.1 on HP ML350 G6

  I'm not able to install ESXi 4.1 on my HP ML350 G6 server.  I have 2 Intel Xeon 5650processor w/6 hearts each, 16 GB memory, RAID 1 + 0 on HP Smart Array P410i controller channel with 6 X 300 GB SAS 10 K disks.  The DVD-ROM is SATA.  The boots just fine CD and get all the way to choose the disk to install it on, but it shows as a remote disc and when I proceed with the installation I get this message:

  The installation operation has encounterd a fatal error:

  Cannot find the image of the installed system. This is due to the image, not been correctly mounted the CD-ROM not supported.

  Curve ball.  I am able to install ESX 4.1 and was able to connect vSphere Client to configure the host.  Why no ESXi?

  I appreciate all the help, I tried as much as I know how.

  Matt

  have you tried to mount the ISO through the ILO instead of using a physical disk? also check the MD5 of the download to make sure it is ok

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• Cannot install ESXi on a Seagate HDD 5.5

  Hello

  While I am trying to install ESXi on a Dell M630 Blade Server, it does not detect the storage drives to install on. I use a Dell certified 500 GB 7.2 K rpm NLSAS 6Gbps in 2.5 Hot plug Seagate (model number hard drive ST9500620SS).

  
  

  Any help would be greatly appreciated.

  
  

  Thank you

  In some cases, it may be necessary to clean the partition table on the disk. In any case, depending on your hardware, components, you may need to use custom Dell ESXi image, which includes additional drivers to take support the Dell hardware. You will find the image at http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-m630/drivers. Simply change the ESXi 5.5 operating system and expand the 'Business Solutions '.

  André

• Cannot install ESXi 5.1 U1 or U2, error CPU_CORES

  
  Hello!

  I can't install ESXi 5.1 U1 or U2 on a Supermicro X10SLM + f motherboard with a quad-core Xeon-E3-1220 v3 CPU. It displays "ERROR CPU_CORES" claiming that I have only a single core and stops the installation. I was able to inject the drivers NIC to go beyond the failure of the 'no network adapter', but now I get this error of CPU.

  Someone at - it tried with this combination and has managed to install ESXi?

  Thank you for your time!

  Gregg

  Root cause found by Milton Cai to Supermicro tech support.

  Flash the BIOS to v2.0 was not completed correctly. Move the jumper to pins 2 and 3 JPME2 and re-flashing, then back to pins 1-2, fixed it.

  See these FAQS:

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=18279

  http://www.Supermicro.com/support/FAQs/FAQ.cfm?FAQ=17137

  Gregg Hill

• Cannot install ESXi 4.1 but can install ESXi 3.5

  I have a Dell PowerEdge 2600

  I tried to install ESXi 4.1, but it simply doesn't. Happens to step to show the points and keep the machine on reboot and it goes into a loop.

  I managed to install ESXi 3.5 that I thought that the machine does support 32 bit.

  There are some features I need on the 4.1 which are not included in the version 3.5 for example boot from .iso and also the 3.5 I think is no stable (dose of console does not display anything).

  As I am already running 3.5 I tried to do an upgrade from 3.5 to 4.1 in vain.

  Would be really appreciated any help.

  Thank you

  Hi, me too I have a Dell Poweredge 2600, I bought used about 4 years ago. The Intel Xeons that are only 32 bit so that they do not support vSphere.

  HTH,

  Bernie

• Cannot install update recent of Acrobat 9 Pro

  After you have installed a trial version of CS5.5 Master collection (including Acrobat 10) my purchased Acrobat 9 Pro has been removed (or otherwise hidden) my machine. After evaluating the choice of different software in the main collection, I uninstalled the entire suite and installed my newly purchased production suite pro. Given that production pro does not include Acrobat, I reinstalled my purchased copy of Acrobat 9 Pro. Since it was installed from the installation DVD, updates are necessary. Everytime I try to update to Acrobat 9 pro, I get the following error: "Adobe Updater Install Manager has stopped working". In addition, whenever I open my outlook 2010 client, it crashes and recommends that I disable the Adobe pdf form (which I've now disabled). I looked on the internet and could not find a solution to the problem. I use Windows 7 Home Premium. Any help would be greatly appreciated.

  Thank you

  Patrick

  Good day Patrick,.

  I'm sorry to hear that you're having trouble.  Please try the following steps after a fresh reboot of your system:

  1. Repair your current installation of Acrobat 9 via help > fix the Installation of Acrobat
  2. Try to update Acrobat via help > check for updates.
  3. If the update fails, try to manually apply the update to Acrobat 9.1 via direct download here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4375
  4. Assuming that the update to Acrobat 9.1 successfully installs, please try to continue to update Acrobat up to 9.5 via help > check for updates.

  Please let me know how it goes and if the problem with Outlook brightens as.

  Kind regards

  David

  Adobe Systems

• Cannot install Windows 8 on retina Macbook Pro 2011

  I try to install and run Windows 8 on my Macbook Pro 15 "retina end 2011 with OS 10.10.5."

  I read a ton of forums, and they say all get a Windows 8 ISO from Microsoft Web site. I did it.

  Then, they say get a Virgin USB key and plug it in. I did, and I put the ISO on my USB external drive.

  Then he said: open Boot Camp Assistant, what I do, but then it does not match what say all forums. When I open the Boot Camp Assistant, he goes to the Introduction page. I click CONTINUE and the next page says SELECT TASKS. The only two available tasks are to "Download the latest software from Apple support" or "install Windows 7 or later.

  I select both, it asks me to select my destination drive, what I do, then click "CONTINUE".

  It downloads the Windows support software.

  Then I get an error message that says "Installer disc cannot is, wait a few minutes for something (I forget exactly).»

  So I wait and nothing happens and I'm back on the screen SELECT TASK.

  ANY HELP MUCH APPRECIATED.

  Greetings Peter Degaillande1,

  A MacBook Pro and MacBook Pro with Retina display requires different versions of Windows due to their different abilities. Here is the information you need to determine what Windows operating system can be installed on your.

  Use Windows on your Mac with Boot Camp 8.1 - this article explains what MacBook Pro models can install Windows 8.1 and the steps on how to do this.

  Install Windows 7 and older versions on your Mac with Boot Camp - this article explains what MacBook Pro models can install Windows 7 and previous versions, as well as the installation steps.

  I hope this helps!

• Cannot install ESXi 4 on HP DL360 G6

  I have a brand new HP DL360 G6 I downloaded 4 ESXi and ESXi 3.5 U4 and iso confirmed are correct with md5 checksums.

  I've updated the Bios and RAID controller to the latest firmware and reset all to factory default.

  I ran HP Smartstart CD and run all the diagnostics & full on everything and everyone on two occasions. with the help of HP Tech on phone.

  I install Windows 2003 Std without any problem.

  I too disabled PXE on the NETWORK interface card in the bios.

  Hardware config.

  2 x Intel Quad Xeon E5540 2.53 Ghz

  4x4Gb = 16 GB of ram (all matched)

  6 x 146 GB 10K two ports SAS RAID 10 on with firmware p410I 1.66 (tested RAID 5 too)

  I get to the screen of the yellow Installer Accept install, then select disk0 and about 2 percent in said what follows.

  The installation operation failed

  The installation operation has encountered a fatal error:

  Cannot write the image on the selected disk. This can be caused by bad sectors on the device or other hardware problem.

  The following information will help VMware Support team with your problem. Please save this information before proceeding.

  System information:

  Manufacturer: Hewlett-Packard

  Model: Proliant DL360 G6

  Used Tag: XXXXXXXX

  BIOS Rev: Hewlett-Packard

  If I not I see the following in the last lines of Alt - F12

  0:00:00:30.601 cpu1:4859) SFS: 1073: 1 e9 4 0 0 0 0 0 0 0 0 0 0 0 not a drectoryh

  sysboot: 13, esxupdate-db-maint returned error

  sysboot: get the "PBHOST" of the line of the kernel startup parameter

  sysboot: running "crond".

  sysboot: execution of "setsid(2) /sbin/watchdog.sh s cdp/user/sbin/net-COP."

  sysboot: execution of "esxcfg-init" - set-boot-progress fact

  sysboot: execution of "sbin/vmdumper" - g successful startup

  0:00:00:30.752 cpu4:4891) successful start

  0:00:00:31.219 cpu5:4899) FFS: 1073: 1 4 4 c 7 0 0 0 0 0 0 0 0 0 0 0 not a Director

  Help, please!

  I would absolutely use the version of HP. First try.

  http://communities.vmware.com/docs/DOC-6824 for a manual installation of the USB. Works the same in 4.

  http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06 for the version of HP

• Cannot install Intel graphic driver on Satellite Pro A40

  Please could someone help me.
  I download the graphics driver updates for my computer toshiba laptop. The brand drivers are INTEL a. I downloaded the drivers from the site to intel. All the requiments that are correct are correct.

  When I went to install the drivers an error message came up saying "the driver cannot be installed on this computer, please contact your computer manufacter.

  Please can someone help me.

  Thank you
  Greg

  I put t know what is the problem? Why you n t use graphics drivers on the Toshiba site?
  The graphics card drivers, manufacturers are not designed for laptops, so you can not install it.