Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

Similar Questions

• Cannot install the update system for Windows 7 tool

  After downloading the installer from Windows 7 64 (October 2014) to "Update the tool of the system", I tried to install the program. However, "Windows Update Standalone Installer" allows you to "search for updates on this computer... "and the status bar continues to streak, but after several hours, no progress has been filed. A backup of hard drive is waiting on this program to solve the problem.

  You will need to stop the search of updated running in background. The value of the automatic updates to "never check for updates" and then restart.

  Best regards, VZ

• Satellite A100 (PSAA9E) - Cannot install the display driver for Windows 7

  I have a problem with installing official Toshiba Windows 7 x 32 ATI x 1600 driver.

  After unpacking it should run install.exe, I think, but it's not; nothing happens. Go on the Setup.exe with installation manual, then I see no Catalyst Control Center & Display Driver from the list, just the catalyst install Manager & vcredist. After installing these components (CCC & DD) are not present.

  Any ideas?

  P.S. Same problem with the official driver of Toshiba Vista32 ATI x 1600.

  Hi mate,

  You have already installed other drivers for the laptop? I mean the chipset driver, this driver must be installed first.
  And are you sure that you have ATI display driver? Some Satellite A100 models were shipped with the nVidia graphics card, AFAIK.

  Moreover, what happens if you install driver manual in device via advanced installation manager?

• Cannot install Solutions from HP for Windows 8

  Hi you all,.

  Lenovo U310, i5, 4 GB, SSD of 32 GB, 500 GB HD, Windows 8 pro.

  This week, I installed Windows 8 to replace Windows 7.

  Everything works fine, until I have try to re - install my 2-year-old HP Photosmart B109a.

  I tried to download and run the driver:

  PS_AIO_06_B109a - m_NonNet_Full_Win_140_404.exe

  But it seems that the installation runs in a loop, because whenever I start it, to halfway execution it charges me to restart my laptop. Over and over again and it never comes to the installation of the software.

  I will be able to print a document, even if, to the right of the printerfunction of the document itself and there is a possibility to do a scan, but I really need the HP solutions for quick analysis.

  Y at - it someone help me?

  Kind regards

  Jim

  Finally, after countless reboots, login / logout of my printer, I discovered that this Photosmart B109a is not compatible with USB 3.0.

  So I plugged in with USB 2.0 and it all worked perfect.
  Maybe you can do a 'sticky' this conclusion.

  Thanks for the comments!

  Friend,

  Jim

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

  Hi @mnshahid,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• PAVILION LAPTOP 17: Cannot install HP NETWORK CHECK for INTERNET EXPLORER

  CANNOT INSTALL NETWORK CONTROL HO FOR IE

  He doynloads and seems to be.

  But there is no indication in Internet Explorer.

  And the alert Message HP never goes away.

  I don't use IE less forced, like here.

  How to remove the alert SMS from HP?

  I had the same problem. I kept getting the same message after installing the network HP Check for Internet Explorer. After restarting the computer, I still got the message. Then, I opened the window HP Support Assistant and click "Check for the updates and Messages". The message went away.

• Microsoft.vc80, crt, type = win32 error, cannot install itunes and safari

  Original title; Impossible to install safari or itunes

  I can't install itunes or safari.  Get a mistake begins with microsoft.vc80, crt, type is win32

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2. is the specific issue with the installation of these programs?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  I also suggest you to start the computer in a clean boot state and try to install the software.

  Clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Method 3:

  You can also follow the steps in the link and check if it helps.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

• Cannot install ITunes error 'problem with windows install.

  Original title: try to install iTunes - says the problem with uninstalling windows package - a program required for this install... could not be executed. HELP - everything tried

  I have windows vista - quick time is newly installed, but can't get iTunes to install - help

  Hello
  1. is the question confined to the ITunes?
  2 are you able to install other programs on the computer?
  In the case where the issue is limited to the installation of ITunes, you can check that the links to Apple support provided below to solve the problem.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926
  Cannot install ITunes and QuickTime for Windows without Visual Basic Script (VBScript)
  http://support.Apple.com/kb/TS1331
  You can get in touch with support for ITunes to get help.
  ITunes support
  http://www.Apple.com/support/iTunes/

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I am trying to install a program not for Windows 7 it will install on my Windows 7 computer?

  I am trying to install a 2 CD disc set on my windows 7 op system, but installing im program is for windows 98, ME, 2000, XP.  I'm able to put this program on my computer? Any suggestions are appreciated.

  Thank you

  Kirk

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Cannot install app store error 0x80073cf0 Windows

  Original title:. Cannot install an app from appstore windows 8 (or update

  When I try to install the example. Skype, I get this error 0x80073cf0 code. I tried to reboot windows and internet search all solutions, but nothing yet

  I had the same problem,

  stop the Windows Update service

  delete content C:\Windows\SoftwareDistribution\

  Start Windows update

  install the application (Mail App for me)

  It works for me,

  Tom

• What is the link to install Acrobat 8 pro for Windows 7?

  I downloaded and installed Acrobat 8 pro for Windows 7.  But it does not accept my Acrobat 8 for Mac password.

  Customer service said that it's maybe because I have a version upgrade.  I was told "to activate the link."

  Help, please.  Thank you.

  You cannot use the serial number for Acrobat 8 Mac on any Acrobat Windows product. In addition, Acrobat 8 is not compatible Windows 7.

• Cannot install Service Pack 3 for XP Home Edition

  original title: Service Pack 3 for XP Home Edition

  Although my computer is always automatically installed updates, I've never had Service Pack 3 installed. I can't access to Microsoft SP3 to install on my XP Home edition. How can I install SP3 now?

  Hello

  I suggest you only do following steps.
  Step 1:
  You can download the service pack 3 from the link, below, which is applicable to all versions of Windows XP.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  Step 2:
  Perform the clean boot and install Service pack 3 for Windows XP.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.