Cannot install Laserjet 4 on xp HP Pavilion computer.

Similar Questions

• Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

  Hi @mnshahid,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Cannot install any os in a hp pavilion dv5 - 1120ev

  Hi, my friend has an hp pavilion dv5 - 1120ev, he had top, pre installed windows vista. He asked me that if I could make the computer faster, so I told him, of course, you need to change OS to do this, you must install windows 7, I said. So I took with me, put windows 7 dvd, boot from the cd/dvd drive, deleted all partitions, even the recovery partition (I didn't know it came without a copy of disk recovery tools), partitioned the drive into 2 two new partitions, formatted and continued to install the os on the primary. The dvd that I used has all versions of windows 7, 32 and 64 bit, tried all, it gets stuck on the process of expansion, to 0% files (only with one version, she was 14%, I can't remember which), and it gives me the "windows cannot install required files. the file may be corrupted or missing. "Sure... error code: 0 x 80070017. Then, I tried with another dvd with winodws 7 ultimate, same thing. I also tried with the disc do not split into two, one partition, just in case windows is having problems expanding all of the files, just in case, same thing. Then I thought it was a bios thing, he had to be updated, which to be honest there cause of the version it is F.0C, and in the support section of the hp site, I found a newer version of it, which is also described as necessary for the latest operating system upgrade. I thought wow, that's it, I found it, I will upload a version of it bootable, version bootable cd to be precise, cause the bios version there back does not support booting from usb devices, I'll update it and install the operating system. NOPE. The site has an exe of the bios version. I tried to make a disk bootable with the bios in there (with the option of nero boot disc), I guess that I've not done it right, it could be a solution, but I could use some help on this. I also tried to install windows xp, so that I can install it the update of the bios, the same thing, I get the same error, only with the old blue sceen scholl. Finally, I tried to install windows vista Home premium, just in case the bios for a reason any has only accepted this operating system, no way, same error again! So now I'm not stuck wth no operating system, a pc unusable, nothing can be installed on it. I asked my friend that if the cd/dvd drive had some kind of problem, he said, had no problem with game discs, their loading and installation of games. Please HELP I don't know what to do! Thank you

  Nevermind, I managed to solve the problem by taking the hard drive, put it in another phone and the windows installation, then put it back. It worked like charm, so the problem is 100% on the DVD player.

  Thank you

• Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57

  Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find

  am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.

  Hello

  • What happens when you try to install the drivers?
  • You receive an error message?
  • What version of the Windows operating system do you use?
  You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.

  To see how to perform the clean boot, click the link below.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.

  You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept.

• SALVATION CANNOT INSTALL MY PRINTER DELL 725 ON MY COMPUTER WINDOWS 7 64, WHAT CAN I DO?

  How can I install my printer 725 dell with my computer 64-bit windows 7?

  shahriarrahman,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to reasart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download drivers XP 64-bit. Install drivers XP 64 bit in XP compatibility mode you will get a message, the printer is not connected. Connect the printer at the moment (power on)

  Don't forget firewalls and anti-virus programs will block communications.

  You will find links to the patch/drivers to...

  Owners of the printer inkjet color Dell 725 (W7)

  Rick

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• Cannot install laserjet pro p1102w printer, usb error, please help?

  I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

  Hi cowmanchess,

  It seems that you are having problems with your USB port on the computer.

  Have you tried using a different USB port on the computer?

  Have you tried a new USB cable?

  How long is the USB cable you are using?

  You have a USB hub between the printer and the computer?

  Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

  Driver and software of HP LaserJet Full Feature

• HP pavilion DV7-6c10so: cannot install HP Quick Launch on HP Pavilion DV7-6c10so

  I am really pulling my hair out on this one. Recently I swapped my brothers HARD drive into his laptop, and with that we decided to do a clean installation of windows. Evrything went smooth and well with the excavation and activate Windows. But I ran to a problem with the installation of some software and drivers HP. All drivers except 2 would install properly. Once, it was a hassel to install were the drivers Bluetooth and wi - fi. That's what happened when I tried to launch the exe to install:

  A window opens saying some information on im about to install software. I press next here.

  in the next step, I accept the EULA and press Next.

  Then begins the extraction process and once it has been done the window close.

  After this a windows installer window appears saying: preparing for installation...

  This was followed by: Please wait while Windows install configures the installation...

  During this stage, the progress bar fills upp to 100% and the window closes, and that's all. No message telling me the installation was a success or a failure. no error code or message. If I check the Device Manager I can be that the driver is not installed. I solved this problem by right-clicking on the device and then choose install driver and then find the extracted folder and choose the driver in there.

  But here's the tricky part and my problem, I need the software of quick launch buttons asswell but Installer is broken here as well. but since this isn't a driver I can't operate by itself.

  I let the Installer do its thing and all that with the drivers just sort of stops. No messagege not nothing. The program does not appear in the Control Panel, the task bar or in active processes (yes I restarted the computer). However I find it under Add/Remove programs in the Control Panel, so the computer thinks its installed. the same for HP software executives, but it is not as important.

  If I go to the extracted installation location I get a lage Setup window that says welcome to the quick launch HP Setup Wizard. Here, I choose to remove it ocr fix/repair it. I tried manny time to fix but I doesent help. I uninstalled and then installed using this installer manny thus times. Nothing helps. but atleasst with this installer, I get a quick launch of HP has been successfully installed message, yet it doesent work.

  what I tried:

  I installed each updates windows and .net.

  I tried to install an older version (for software farmeworks and quick launch).

  I reformatted and reinstalled the computer once again to see if the problem was caused by windows.

  go to the installation folder and run there (only for software frameworks).

  News of the computer:

  model: HP Pavilion DV7-6c10so

  Shipping os OS: Windows 7 Home premium x 64

  After reformatting operating system: Windows 7 Home Premium x 64

  I'm in the desperaste need to get this working because it's my brothers computer and it needs today to come back later and I said wrong I work just like before.

  Sorry for the bad English everybody!

  Hello

  In this case, it may be worth trying the following.

  Uninstall the current version QLB and restart.

  Download the version from the following link and save the installation program.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  Use software such as 7-Zip manually extract the contents of the Setup program, and then run the setup.exe routine (20 KB) as an administrator since the extraction folder.

  This can or can not give an indication that it completed - if not, leave it for 5 minutes, then restart.

  If it still does not work, check if the routines are present in C:\Program Files (x 86) \Hewlett-Packard\HP quick launch area and let me know - I'm going to work but to hope to be back within the hour.

  DP - K

• Cannot install Ubuntu on HP DV4 1500 Pavilion Entertainment PC

  I have a laptop with Windows 7 preinstalled by HP.

  now, I want to use it as a Linux Machine.

  When I try to install or start any linux/UNIX cd/usb, the system does not detect the...

  but when I boot it from win7 or win8 system detects and installs...

  How to get around the BIOS Lock Windows 7 (Windows)

  and install Linux OS flavor...

  Guide me as soon as POSSIBLE...

  It wasn't a problem with the BIOS settings...
  The question is how HP handles the boot device for locked bios of laptop computers.

  You cannot boot any os other than OS locked.

  Deviation is boot Ubuntu via USB HDD and install...
  subsequently install updated BIOS (from Ubuntu using Insyde Orginal Patch) to definitively solve the problem...

• Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-n278tx

  
  

  Hello:

  In fact there is no driver for your GPU.

  The hardware ID for the graphic adapter that is specific to your model is not included in the driver pack.

  I reported this problem to HP engineering who is working on the release of a working driver.

  You can check the related link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-Pavilion-15-n252sq-can-not-install-Windows-over-free-DOS/TD-p/3921940

• Cannot install XP X 64 in HP Pavilion DV5-1203ax

  Hi all

  I have trouble to install VMWARE in my laptop that is currently installed with Vista Home Premium 32 Bit. I then decided to go to XP X 64 bit and during the installation, I got a blue screen error message before you even load all files.

  Error message: STOP: 0x0000007b (0xfffffadf90a323c0)

  Help, please.

  Thank you very much

  Prince

  Also please let me know that the reader downloads for XP x 64 for DV5-1203ax

  Hello

  There are big problems with the drivers for XP 64 bit version, software, etc. This version is not as good as another system supported. I know that the there is a difference which can be very important to you. Then XP 32 bit can contain only 3, 5 GB of Ram and 64-bit version that can take all this chipset. If you need Ram full for any program or any other thing the best choice is to use both systems. One will be XP32 bit and second x 64 Vista or Win7 x 64 which is now in beta test mode.

  Until you do anything please readmy all post, please.

  Don't forget also then before starting the change for dual-boot on you laptop you need to prepare the XP CD. All information on this subject, you will find in the section of downgrade XP 32 bit which is written below in this post.

  If you want to use two systems on your computer, you will need to do it like this:

  Has) for Vista x 64 with XP 32 bit: how to dual boot with Vista installed first guide here.

  B) for XP 32 bit with Win7 x 64: how to dual boot with 32-bit XP installed first guide here.

  Downgrade XP 32 bit:

  Decommissioning of this model is not always easy, and your model is designed to work well with Vista. Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  Before going down do Vista backup. Here you have all the information, how do.

  Now you need to integrate your drivers Sata (only x 86 drivers) with nLite.

  Here are the Sata drivers for you. Just unRAR it drivers with Winrar.

  Here you will find the file .doc with guide how to integrate this with Windows XP Sata driver. (You will need to open the Microsoft Office).

  Here you will find the file with the same guide *.pdf . (You must open the Acrobat Reader software. Download link for this program here. Select your language and your system it.).

  Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

  In nLite, you can even burn your new XP CD with these changes.

  All the drivers, you will find in the guide of Cheryl General Guide of Downgrade XP for HP Laptops_Part 3.

  If you have problems make me know about it. I'll try to help you as quickly as possible.

  Message edited by Daniel_Potyrala on 02/09/2009 10:33

• LaserJet MFP M125nw Pro: Cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hi guys,.

  I hope you could help cause I've already lost 5 hours without results and I'm crazy. I start the installation and when the installation wizzard asks me to connect the printer via USB, it startr devices discovered and suddenly it gives me this message:

  Then I check the event viewer, and it shows these errors:

  

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• Cannot install Microsoft SilverLight in the Windows XP computer.

  Original title: I can't uninstall windows starlight.

  I use Windows XP and want to watch Netflix on my computer.  I tried to install the new version of Starlight, but he said I need to uninstall the old version.  I tried to do this (Control Panel/remove programs), but get a message that it cannot find the place (looks like it is looking for a drive).

  Can anyone help?

  Hello

  What is the full error message that you receive?

  (a) you can try to remove the previous version of Microsoft SilverLight from Add / Remove programs by following this link.

  How to manually remove programs from the add tool / remove programs

  (b) later, you can download & install the latest version of Microsoft Silverlight and check if the problem persists.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If this does not resolve the issue, I recommend you ask your question in the Silverlight solutions Center for assistance.

  Hope the helps of information.
  Please post back and we do know.

• Cannot install WHS connector on a 64-bit computer, although the software!

  Hello

  So far, I have:

  Restoration of Mediasmart server on 32-bit computer
  Did all updates HP and WHS
  Have the version 1.3.6 etc..
  Have PP1
  Now I'm going for 64-bit and connect the server and open < host/software Server Connector software.
  
  Double clicking on Setup or Install result with "impossible to install this software on a 64-bit".
  
  I can see in the folder outside the configuration / installation
  
  WHS_ConnectorHelp.chm
  WHSConnector.msi
  WHSConnector_x64.msi
  WHSConnectorInstall.exe
  WHSVersionUpgrade.dll
  WHSVersionUpgrade_x64.dll
  
  So obviously the connector for 64-bit software is there but it wont let me install!

  Can someone help?

  Henry

  Laptop with Vista32bit

  Spirit of Packard Bell Vista 64-bit

  HP Mediasmart EX475 with WHS

  Hi, OK so here is how I did it. I have a Vista 64-bit operating system, and I had the same problem. First, click on file -WHSConnectorx64.msi , and when the apears promp to save or run, click on save and just save it to your desktop. Then click on the -setup.exe file and and when you are prompted to run or save, you can save it to the desktop or run it. I don't remember exactly what I did at that time, but there are only two options. If you save it on your desktop, simply open the installation program and it should be able to find the rest of the required information complete the 64-bit installation. After you have installed the sowtware connector that I came across another problem. Because I'm also on my PC wirlessley I couldn't actually Conect to Server console initially. I found that by disabliling the my security software internet temporarily, that I was able to connect, and everything seems fine. I hope it's useful. Thank you

  Chris.

• Cannot install 3 WMF on Windows 2008 SP2 computer

  I have a system running Windows 2008 SP2 Enterprise edition OS. I try to install windows management framework 3 so I can get running powershell 3.0 on it and unable to do so. When I run the installation of 3 WMF, I get a message "the update does not apply to your system". On the WMF page, it lists this version 3 can be installed on windows 2008 SP2.

  The system has .NET 1.1, installed 3.5 SP1 and 4.5.2. I don't see WMF in the Windows Update list on the server. Suggestions that more I need to install or uninstall?

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.