HP Scanjet 2400

Similar Questions

• How can I install my old hp scanjet 2400 driver

  I have not find a driver for my old HP scanjet 2400 driver. Help, please.

  You can download the drivers and software here:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=297430

  install the drivers according to the instructions on the site.

• Scanner HP Scanjet 2400 does not not in windows OS 8.1

  Mr President.

  I installed HP Scanjet 2400 works is not in windows OS 8.1

  With the latest driver but it does not work

  I fix my problem. With the help of Microsoft. I'm sorry to say that HP has not helped to solve my problem

• HP Scanjet 2400 preciso saber

  Boa noite, download do driver para fiz restore meu scanjet 2400 as funcionar parou not meu earlier micro, novo instalei windows 7 e agora com, agora preciso saber to pilot preciso desintalar o meu CD that accompanied o cell na compra? aguardo instrucoes.

  Thanks, e boa noite! Gualhanone Aurea
  11-55726027

  Microsoft fornece suporte responde local em inglês. O seguinte Uniform Resource Locator (URL) fara com voce receba ACE apropriado para suporte information has sua

  Localização. Abra o link e selecione sua region na lista e suspensa doesn't click any button Seta para continue.

  http://answers.Microsoft.com/pt-BR

• Deskjet D2660 printer: unable to print from your PC Windows 10 using printer HP Deskjet D2660 shared connected to Windows 7 PC

  Hello

  I have two PC Marge and Homer connected through a NetGear router:

  Margin: A Windows 7 32 bit laptop computer with an HP Deskjet D2660 printer and one scanner HP Scanjet 2400 attached to it. All these devices work perfectly well.

  Homer: 10 64 bit Windows desktop without devices.

  The two computers share their photos, music, videos and documents folders and printers via a homegroup. However, although Homer can see the printer connected to the margin, if I try to print anything from Homer, it fails. To give an example of this, if I print from 2013 word on Homer, the dialog box is shown below:

  

  

  At other times, on Homer, the item to be printed appears in the print queue, spool but then disappear. Moreover, I am aware of the problems of HP driver causing the elements to disappear with the disappearance of print queues in Windows.

  All the HP diagnostic software I tried did not detect the printer, perhaps because it is an older model.

  Can someone advise?

  Thank you

  Martin O'Shea.

  For the Dissapperaing of print job in the queue. Please follow the path below.

  Step: 1 Goto C drive--> Windows System32-->--> coil--> printers (right click and click Properties).

  Step: 2. under printer properties. Click the Security tab.

  Step: 3 Under Group or user name-> click on each one, then click on modify.

  Click on allow on all the paramaters (Permission) and then click on apply and then click ok.

  Step: 4 reboot the system and unplug the power cable from the printer without pressing the power button on the printer.

  Problem should be solved, it's usually because that computer allocates the permission for printing.

  I hope that this should take care of the concern.

• Photosmart 5510 Scan to PDF

  I just bought a photosmart 5510 and installed on a Mac OS 10.7

  It is to replace an old but reliable scanner HP scanjet 2400 which I was using connected to a windows machine. on the scanjet I could scan multiple pages to a PDF, but I don't know how to do this on the 5510.

  Thanks in advance

  Ok

  Run the installation again,

  Be sure to select check the option software recommended during installation.

  (In the 3rd or 4th form).

  You will find the Hewlett-Packard with the HP Scan3 folder inside it.

• The deskjet 6980 printer model is compatible with Windows 7 Professional 32-bit update?

  I think the upgrade to Windows 7 Professional, 32-bit. I have a printer HP deskjet, model # 6980. This printer is compatible with Windows 7 Professional, upgrade? I also have a HP scanjet 2400, is compatible too?

  Hi harypick46,

  Yes, the drivers are already included in Windows 7 32 - Bit for the 6980. In regards to the scanjet I'm not find information about the drivers for that old of a scanjet.

  http://support.HP.com/us-en/document/c01943577

  http://support.HP.com/us-en/document/c01874725

• Swap ATI 2600 Pro w/2400?

  Hello

  I have an iMac mid-2007 with an ATI Radeon 2600 Pro. The system has been great! Unfortunately, yesterday I thought he was asleep, but it is a black screen

  I did everything I could find online - command/option/r/p...power off the power, unplug, hold down the power button / stop, etc... multiple times. It starts up, it works very well - until the screen

  becomes black. Watch a movie, I can still hear in market, so the rest of the system seems fine.

  At the moment I took the HD on the 24 "and put it in this 20" I hit now. This seems to be a pretty solid solution and confirms - until now - it's a hardware problem.

  In this iMac 20 ", I have an ATI Radeon 2400 with 128 MB and it seems quite acceptable. But - I'd rather have my 24 "operational.

  So, can I place this ATI 2400 since early 2008 20 "iMac on my iMac 24 mid-2007"? And, if applicable, any really good vids how? Laughing out loud

  I ask because I've got the 24 "outside, a mother/logic, totally disconnected map with the exception of a single cable that I'm not 100% sure how it disconnects (if you encounter in the system is in the lower right section under the logic board and seems to be connected with a certain type of black cloth glued and I hesitated to yank/cut/pull!).

  Thanks for any advice at all!

  Rob

  I would check this site:

  https://www.iFixit.com/

  They have full instructions and could probably advise you about the graphics card.

• hp scanjet 3800 no power

  I write in the right section?  I'm not sure. The site is really complicated and not easy to deal with.

  I have my scanjet hp model 3800, it used to work until suddenly collapsed for unknown reasons.

  my attempts: I connect it to a power source (I tried a few different), but it does nothing to show me that his life, is not even a light... nothing.

  My guess is that something is worng with the power to control device inside the scanner (any ), maybe it burned to the top for some reason any.

  now, what should I do?

  Serial number of the product if necessary: CN764A15CM

  P.S. This thread was moved to HP Service Manager / Service Center Support and Forum of News for Scanners - HP moderator of the Forum

  Hello

  This forum is in fact related to the software.

  Looking for information on a Scanner then please look in the following forum:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Could be a problem of supply of power on this thread:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/lost-my-power-supply-what-voltage-do-i-need-HP-ScanJet-3800/m-p/797399#M18182

  Kind regards

  Alex

• ScanJet g4050 not compatible with El Capitan

  ScanJet g4050 no longer works with El Capitan. I have iMac and on the update of OS X 10.11 the scanner stopped communicating with the computer.

  Any suggestions?

  Finally, I contacted HP.  They are aware of the problem. They said they no longer support scanjet G4050. However, they recommend a third-party software that can be downloaded on the net. BUT you will have to pay the money.

  That's what they said:

  The solution that we recommend is VueScan. http://www.Hamrick.com/VueScan/hp_scanjet_g4050.html

  If you pay 80 USD for the software of theVueScan get the scammer as he was running, or buy a new scanner.

  This is the case!

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• Need driver modem for Satellite 2400

  Hello

  I'm looking for Toshiba Satellite 2400 PS240C - 00UJXP Modem Driver modem driver.
  Serial number: 621165P. Made in the Philippines.

  My operating system is Windows XP Service Pack 2.
  Please give me the link to download the same. Thanks a ton.

  Kind regards
  Out

  Hi man,

  I give you the link where you will find that what you´re looking for:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Toshiba - download drivers:

  When you get there, just click you trough the list and choose your machine, so you can get the driver you need.

  Welcome them

• HP Scanjet 4300C compatibility with Windows 7

  I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

  In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

  I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

  Hope you can help me.

  TNX

  Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

  Here are the directions:

  1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.
  
  2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
  Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.
  
  3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.
  
  4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

  5 restart your computer.

  6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.
  
  The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

  My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.

• HP Scanjet G4010 Windows 7 software problem

  I recently updated my computer to Windows 7 and installed the latest drivers and software for my old scanjet G4010.  It will scan using the button on the scanner, but I can't adjust scanning settings (picture of quality, where the harvest, etc.).

  BUT the scanner software does not work. This brings me through the installer without any problems until it reaches the actual scan wick. By clicking on finish, there is no process of scanning, and nothing is recorded. Have you tried several places, but... nothing.  Not in a satisfactory way, such that it has reduced what was a versatile workhorse to a silent photocopier.

  Is there a solution?

  Hi Paul2001,

  I understand that since the upgrade your OS to Windows 7, you are no longer able to use the scanning software.

  I would like that you start here: 'No. Scan Options' or "scan settings are not defined", that will guide you through the troubleshooting steps and also the possible solutions.

  I would like to know if it was useful, if you have more questions please let me know.

  Thank you