HP pavilion DV7-6c10so: cannot install HP Quick Launch on HP Pavilion DV7-6c10so

I am really pulling my hair out on this one. Recently I swapped my brothers HARD drive into his laptop, and with that we decided to do a clean installation of windows. Evrything went smooth and well with the excavation and activate Windows. But I ran to a problem with the installation of some software and drivers HP. All drivers except 2 would install properly. Once, it was a hassel to install were the drivers Bluetooth and wi - fi. That's what happened when I tried to launch the exe to install:

A window opens saying some information on im about to install software. I press next here.

in the next step, I accept the EULA and press Next.

Then begins the extraction process and once it has been done the window close.

After this a windows installer window appears saying: preparing for installation...

This was followed by: Please wait while Windows install configures the installation...

During this stage, the progress bar fills upp to 100% and the window closes, and that's all. No message telling me the installation was a success or a failure. no error code or message. If I check the Device Manager I can be that the driver is not installed. I solved this problem by right-clicking on the device and then choose install driver and then find the extracted folder and choose the driver in there.

But here's the tricky part and my problem, I need the software of quick launch buttons asswell but Installer is broken here as well. but since this isn't a driver I can't operate by itself.

I let the Installer do its thing and all that with the drivers just sort of stops. No messagege not nothing. The program does not appear in the Control Panel, the task bar or in active processes (yes I restarted the computer). However I find it under Add/Remove programs in the Control Panel, so the computer thinks its installed. the same for HP software executives, but it is not as important.

If I go to the extracted installation location I get a lage Setup window that says welcome to the quick launch HP Setup Wizard. Here, I choose to remove it ocr fix/repair it. I tried manny time to fix but I doesent help. I uninstalled and then installed using this installer manny thus times. Nothing helps. but atleasst with this installer, I get a quick launch of HP has been successfully installed message, yet it doesent work.

what I tried:

I installed each updates windows and .net.

I tried to install an older version (for software farmeworks and quick launch).

I reformatted and reinstalled the computer once again to see if the problem was caused by windows.

go to the installation folder and run there (only for software frameworks).

News of the computer:

model: HP Pavilion DV7-6c10so

Shipping os OS: Windows 7 Home premium x 64

After reformatting operating system: Windows 7 Home Premium x 64

I'm in the desperaste need to get this working because it's my brothers computer and it needs today to come back later and I said wrong I work just like before.

Sorry for the bad English everybody!

Hello

In this case, it may be worth trying the following.

Uninstall the current version QLB and restart.

Download the version from the following link and save the installation program.

http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

Use software such as 7-Zip manually extract the contents of the Setup program, and then run the setup.exe routine (20 KB) as an administrator since the extraction folder.

This can or can not give an indication that it completed - if not, leave it for 5 minutes, then restart.

If it still does not work, check if the routines are present in C:\Program Files (x 86) \Hewlett-Packard\HP quick launch area and let me know - I'm going to work but to hope to be back within the hour.

DP - K

Tags: Notebooks

Similar Questions

  • HP Pavilion 1204ey g6: help to... Cannot find the quick launch buttons

    Impossible to find, place buttons to launch fast hp for my hp pavilion 1204ey g6

    Windows 7 64

    I don't understand. all the works of buttons, except the f2 and f3 display brightness.

    the program on the computer is not installed

    Hello:

    You must install the graphics driver so that the brightness function keys work.

    Graphics driver: installation and reboot.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103101-2&cc=us&DLC=en&LC=en&OS=4063&product=5197737&sw_lang=

    Software quick launch:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5197737&sw_lang=

  • Cannot resize the Quick Launch toolbar.

    I searched for an answer to my problem all morning and everybody repeat how the new quick launch taskbar is too restrictive and it only lets you see three icons at the same time. Well, I have the opposite problem. Every, single icon than me or my wife adds to the Quick Launch toolbar is always visible and I don't have any of the sizing handles on it to allow me to resize it. I unlocked the taskbar and everything. It is really annoying because I want my important shortcuts in the quick launch, but I also want to be able to actually USE my taskbar. If I continue to put icons on the quick launch, it will extend to all the way to my system tray and those who don't adapt are simply not available. Can someone help me?

    Yes, because Windows 7 uses more a Quick Launch toolbar, so no "resize handles' I thought you may be interested in other options of the task bar to help keep the taskbar clear of both directions
    (right side now known as Notification area).
    May not be the answer you are looking for, but it's one of a number of "it's not broken, but we
    will remedy "monopoly issues $ oft unleashed in Win7"
    (one other 'Favorites' - taking away the option to disable the auto organize into folders).

    The only other option is the "always on"the cartel", etc. in the properties of the taskbar, but it combines only
    reduced apps / browsers.

    Hmm - speaking of "resize handles.  I just noticed that when the desktop is enabled (unlocked taskbar)
    the "sizing handles" reappear, but unfortunately work the wrong way autour if you want a clear
    Taskbar to display minimized applications or browsers.
    You can pull the handle from right to left and push apps/browsers minimized in the "quick launch" area on a up/down selection arrow. Not very practical is that?
    Good for those who want to keep their desktop icons displayed on the task bar, I guess?

    The window help-

    "The Quick Launch bar is not included in this version of Windows. To quickly open programs, you can pin them to the taskbar. For more information, see Pin a program to the bar spots.

    To quickly open files, folders, or websites, you can pin them to the program's jump list. You can use jump lists to get to recently opened items. For more information, see using jump lists to open programs and items. »

    There is more on the topic in Windows Help.

    .

  • Cannot install the quick share

    Original title: performance and security in Internet Explorer

    Disorder in the rapid Ininstalling share.

    Hi Chris,

    1. make any error message when you install rapid share?

    2. were there any changes (hardware or software) to the computer before the show?

    Run the Fixit and check if it works.

    Solve problems with programs that cannot be installed or uninstalled

    Hope this information helps.

    Just reply to us if you encounter any concerns.

  • HP Pavilion dm4 2165dx: cannot install the wireless driver

    I improve my OS to windows 7. While trying to install the drivers, everything has been installed successfully except the wireless. I tried all the drivers wireless for my product and he just immediately close after extraction. I also tried Windows 8.1 and tried to install wireless driver for the operating system but has always failed.

    HP Pavilion dm4 2165dx

    Windows 7 Ultimate 64 Bit

    Hello:

    You should see a device labeled network controller listed under other devices in Device Manager if necessary the driver wireless card.

    There is something wrong.

    1. the wireless card needs the HP Connection Manager software installed so it can be activated by using the software, then you should be able to install the driver or the Terminator post will be installed.

    HP connection manager

    File name: sp54945.exe

    2. the wireless card is bad and must be replaced, or must be removed and reinstalled because of an oxidized connection.

    3. the motherboard is bad.

    Also install software quick launch to ensure that all Fn keys work correctly.  There's a chance outside that might be the problem, but I doubt it.

    HP Quick Launch software

    File name: sp54001.exe

  • Quick Launch buttons uninstall problem

    Installed from Download FTP site HP Quick Launch Buttons produced version HP 6.50.18.1 (sp49456) by mistake (is install the Quick Launch bar). Now impossible to uninstall HP Quick Launch Buttons sp49456 in programs and features in Control Panel. Have tried several times (error:-5005: 0 x 80070002). Also tried several times to reinstall sp49456 more old install and uninstall then from programs and features - even in Safe Mode - but does not work. Finally advised Support HP to do a system restore prior to facility QLB, but my system has no earlier restore points. Is it possible to make some kind of manual uninstall - registry maybe? Please notify.

    System Specs:
    -G4-1319tu Pavilion
    -Windows 7 64 bit
    -error:-5005: 0 x 80070002 (when you try to uninstall)

    Hello

    OK, let's try another method.

    First, install the incorrect file buttons to quick launch once more and once completed, restart the laptop.

    Download and install the free Revo Uninstaller from the link below.

    http://www.revouninstaller.com/download-freeware-version.php

    Revo and see if it recognizes the QLB software. If this is the case, right click on the program icon you want to remove and choose uninstall. This will launch at the beginning of the uninstall routine own applications that will almost certainly fail again - continue anyway.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove. Do the same for all the remnants of files and folders. Once the uninstall is complete, reboot the laptop.

    Kind regards

    DP - K

  • HP Probook 4530 s quick launch buttons

    Hi, today, when I woke up the laptop the keyboard did not work... So I uninstalled with drivers

    I know a simple reboot would have been enough, I was too hasty... I am the keyboard driver to a standard Windows keyboard driver, and my left Fn, CTRL key and probably others stopped working.

    So I found that installing is quick launch them buttons work again, BUT they are switched (I guess the QLB driver is for other laptops). Installed from here:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-822...

    I could not find a more recent version, not to mention one for Probook s 4530, anyone help with it please?

    PS I also reinstalled HotKey support, no help for that...

    SOLVED.

    Installed HP Support Assistant, which has installed stuff like Atheros driver net, then a few updates to Windows, and then a new BIOS of this HP SA. And now its fixed, nice

  • URGENT: Quick Launch software does not

    Hello

    I had formatted by laptop HP G42, whereupon f3, f2 and brightness keys do not work.

    I was told to install software quick launch for her since this link - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en... that I had tried to install however, told him that I already have a Quick lauch in my PC. When I checked, I already have a Quick Lauch 2012 C softwareshore that I tried to run, repair and also uninstalled and installed the same new however, f2 and f3 still does not.

    I also tried to install the new software from the link mentioned however, f2 and f3 still does not.

    Kindly help solve as soon as POSSIBLE because I have to use laptop every day and brightness should be adjusted. Kindly solve as soon as POSSIBLE.

    Kind regards

    Isha Abrol.

    Ok...

    I didn't know that you have Windows 7 32 bit installed.

    I gave you some 64-bit drivers.

    This is why you got this error... Make sure it is designed to work with Windows for 32-bit systems

    See if this graphical 32-bit driver works...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90548-2&cc=us&DLC=en&LC=en&OS=4062&product=4301647&sw_lang=

    Try the manual installation, if auto installation does not work, but this time navigate to C:\SWSetup\sp50871.

  • Windows 7 - the DV 6000 Driver quick launch buttons

    Hi guys

    I wanted to know if someone could help me with this problem, I just updgraded my laptop OS from Vista to Windows 7 and the only rider I noticed that his being absent is the one for the quick launch buttons.

    I installed the one for vista, but when I run win 7 it immediately tells me that I have the wrong OS driver for it.

    How can I solve this problem?

    Thanks for reading this...

    HP QuickPlay here (for 32/64-bit Win7) install before quick launch!

    HP Quick Launch buttons here (32/64 bit Win7)

  • A toolbar disappears from the taskbar. (Quick Launch toolbar)

    In windows 7 Home Edition premium, I have a frustrating bug. I tried to use the functionality of the toolbar to add to the taskbar and by doing so the addition of a quick launch Search menu that him. Sticky icons do not have a solution for me, so I need a quick launch as a toolbar to work.

    Do work was pretty easy, I just added the folder used for the quick launch shortcuts, I wanted to use. My problem is that every once in a while, when I turn on the computer, or when I restart it or even after disconnection and return newspaper, the toolbar, I added disappeared completely.

    Solutions I tried to solve this problem:

    (1) setting the registry values for windows save my settings at each reboot of the/log - off /sleep/shut-down etc.

    (2) save the theme after I have reset the toolbar and use it as my default.

    (3), to try to create a new user profile and move everything that I need to work on this new username and you try to install the Quick Launch toolbar again.

    (4) lock the taskbar after the addition of the Quick Launch toolbar.

    (5) remove the toolbars that could be clashes with the quick as the language bar launch (although I greatly need it for my work).

    None of these attempts at fixing worked , restart every second or almost everytime I sit down to work on my computer the same thing happens. Quick Launch disappears.

    W7 dear experts, I'm a fan of windows 7 and I like much more than XP or Vista, but two of them cost me much less expensive and had a simple feature to do me my job efficiently. the Quick Launch bar. I can't have 40 icons spread allover deliver to my office, so it's a very frustrating for me. Help, please.

    Oh and a friend of mine half jokingly suggested this could be a feature to discourage people from using a win7 Quick Launch toolbar, if it is the case let me know as soon as POSSIBLE so that I can go back to XP before I lose more time on this issue.

    Waiting for good news :) Philip.

    Jet_Lag,

    Try this fix, seems to be what you are looking for:

    http://support.Microsoft.com/kb/979155

    Hope that helps!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Pavilion DV7-3125sf buttons to quick launch DRIVER failed

    Hello

    recently I formatted my PC "HP pavilion Dv7-3125sf" because of hard drive problems

    now I'm on (Windows 7 Professional x 64)

    and I downloaded all the drivers and multimedia software of HP 'support & drivers '...

    everything is cool otherwise buttons to quick launch... normally if you change the volume there show a Volume bar, now the volume change but there is no ban on Volume...

    -How can I download this (in the HP drivers & support there is no software for this)

    Thank you!

    Hello

    Download and install MediaSmart SmartMenu on the link below and save this to your desktop.

    FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45140.exe

    Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When it finished, restart the computer and check if you have now the volume display.

    I hope this helps.

    Best wishes

    DP - K

  • Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

    Hi @mnshahid,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Cannot install any os in a hp pavilion dv5 - 1120ev

    Hi, my friend has an hp pavilion dv5 - 1120ev, he had top, pre installed windows vista. He asked me that if I could make the computer faster, so I told him, of course, you need to change OS to do this, you must install windows 7, I said. So I took with me, put windows 7 dvd, boot from the cd/dvd drive, deleted all partitions, even the recovery partition (I didn't know it came without a copy of disk recovery tools), partitioned the drive into 2 two new partitions, formatted and continued to install the os on the primary. The dvd that I used has all versions of windows 7, 32 and 64 bit, tried all, it gets stuck on the process of expansion, to 0% files (only with one version, she was 14%, I can't remember which), and it gives me the "windows cannot install required files. the file may be corrupted or missing. "Sure... error code: 0 x 80070017. Then, I tried with another dvd with winodws 7 ultimate, same thing. I also tried with the disc do not split into two, one partition, just in case windows is having problems expanding all of the files, just in case, same thing. Then I thought it was a bios thing, he had to be updated, which to be honest there cause of the version it is F.0C, and in the support section of the hp site, I found a newer version of it, which is also described as necessary for the latest operating system upgrade. I thought wow, that's it, I found it, I will upload a version of it bootable, version bootable cd to be precise, cause the bios version there back does not support booting from usb devices, I'll update it and install the operating system. NOPE. The site has an exe of the bios version. I tried to make a disk bootable with the bios in there (with the option of nero boot disc), I guess that I've not done it right, it could be a solution, but I could use some help on this. I also tried to install windows xp, so that I can install it the update of the bios, the same thing, I get the same error, only with the old blue sceen scholl. Finally, I tried to install windows vista Home premium, just in case the bios for a reason any has only accepted this operating system, no way, same error again! So now I'm not stuck wth no operating system, a pc unusable, nothing can be installed on it. I asked my friend that if the cd/dvd drive had some kind of problem, he said, had no problem with game discs, their loading and installation of games. Please HELP I don't know what to do! Thank you

    Nevermind, I managed to solve the problem by taking the hard drive, put it in another phone and the windows installation, then put it back. It worked like charm, so the problem is 100% on the DVD player.

    Thank you

  • his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

    1. number and product name
    laptop HP pavilion dv3z

    2 operating system installed (if applicable)
    Windows 8

    3. All changes to your system until the problem occurred
    installed windows 8

    When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

    When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

    Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

    If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

    Let me know what happens.

  • PAVILION LAPTOP 17: Cannot install HP NETWORK CHECK for INTERNET EXPLORER

    CANNOT INSTALL NETWORK CONTROL HO FOR IE

    He doynloads and seems to be.

    But there is no indication in Internet Explorer.

    And the alert Message HP never goes away.

    I don't use IE less forced, like here.

    How to remove the alert SMS from HP?

    I had the same problem. I kept getting the same message after installing the network HP Check for Internet Explorer. After restarting the computer, I still got the message. Then, I opened the window HP Support Assistant and click "Check for the updates and Messages". The message went away.

Maybe you are looking for

  • Re: Activating Windows 7

    Recently I got a msg saying that my operating system Windows 7 is not genuine on my satellite 3 year [I have Norton firewall and Avast security].I have a valid product code, but Microsoft say that I have to buy a new Windows operating system at £75.

  • Should which driver I for PCI Flash memory?

    I have a device called PCI FLASH memory in the recognized management system. Does anyone know I need to install driver of witch.

  • Can power supply Question - I use the 230W power supply with a W540?

    I have a W540, which currently uses a power 170W (8.5 a 20V) I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a. The connectors are similar, but I'm hesitant to try the 230W power supply in the W540. It is allowed to u

  • divide characters based on the length

    How can I split string such as 'HELLO' => 'H' 'E' 'L' "L", "O" using the length

  • ATI X195XTX

    I was wondering if there is a way to run DirectX 10 on my ATI X1959XTX because I can't afford to further improve.