Cannot install photosmart c5280

Similar Questions

• Cannot install photosmart 5510 on mac 10.4

  I just bought photosmart 5510 but cannot install on my Mac 10.4, despite the assurances given by the sales staff that it would be OK?

  Hello

  I recommend you contact the retailer that the information provided is false.

  The product requires Mac OS X 10.5 or higher, as you can find the system requirements specified below:

  http://support.HP.com/us-en/document/c02907978

  One of the latest models requires Mac OS X 10.5 and above, however I think that you can always find some models of last year as 4500 Officejet, Photosmart C410 for example who make compatible with your operating system.

• Cannot install Photosmart C6380

  Photosmart C6380 all-in-One installed the printer almost all the way to the wired network. Then, he fails to finish. I've even set up 100%, then get a fatal error. I uninstalled the software, rebooted the computer, reset the printer and that she fails. I cannot go into the printers info via my browser, but something in the printer software is a failure. I have configured my Norton Internet Security 2011 several times and stop him and he still fails to install. I have Windows XP Home SP 3 and a modem/router ubee 36100

  If the corrupted registry is advanced, we recommend a complete reformat of the OS on your computer.

  After you have installed the drivers of motherboard, do not install any other software first.

  Install the HP printing software immediately. It will work...

• HP Photosmart 7520 e‑All‑in‑On: cannot install Photosmart 7520

  I had problems with my wireless printer so I removed from my list of device and tried to re-intall.  I did it in the past and it seemed to solve the problem.  This time, my computer is unable to find the printer at all.  I tried to reset my router, my printer and restarted my computer.  He just warned about seaching and said to turn on my printer.  TMy printer is turned on and the wireless signal is strong.  Help, please.

  Hi @tcasey1,

  Welcome to the HP Forums!

  I see that you can not install your HP Photosmart 7520 on Windows 8.1. And I'm happy to help you!

  To check the printer hardware is functional, you are able to print a test page from the printer control panel? Video: printing a Test Page. (The video shows a HP Photosmart 6520, but the same instructions will work with your HP Photosmart 7520).

  You see error messages on the display of the printer?

  In the meantime, please, try the procedure described in this guide, the printer (Windows 8) "offline" Status Messageand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide helps and hope to hear from you soon!

• Cannot install Photosmart 5510 in Windows 8

  Installation disc will not install in Windows 8 32-bit).  MODs in the works for this problem?

  Simply go to page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = on & CC = US & DLC = in & sw_lang = & Product = 311255 #n226
  The utility and diagnostic tools download
  HP printer install wizard for Windows
  
  Follow the instructions.
  It worked perfectly for my win 8 64-bit.
  Good luck

• Cannot install Photosmart B - 209 on Win 8.1

  Trying to install sw full of features for b-209 existing on a new Lenovo Yoga 2 Pro installed Win 8.1 64.

  Have you tried the installer and it downloads the full sw.  After the extraction is nothing, no screens, no sense etc...

  Have also manually downloaded the complete sw of features and tried to install with the same results.  The sw has no problem to find my printer on the network.

  At some point, the base driver has been installed and connected to the printer, I was able to print.  Need the Solutions Center for the status of scanning and printing.

  At this stage there is no HP in my program files folder and no HP on my splash screen and no installed HP printer.

  Is it me or the sw?  Experts available?

  My problem has been resolved.  Although my solution maybe isn't the final solution for the others, I am convinced that Jonathan, Brent and engineering group will be able to offer a solution to the installer.  Thank you guys for your help.

• Why can not install my HP photosmart c5280 printer?

  My printer is a HP photosmart c5280. When I try to install it, a message come, thing about system requirements. Can anyone help please?

  See if it helps:

  Message "your system is unresponsive to the minimum requirements of the system" is displayed on the computer while installing the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01896918&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3204464

• I cannot print to my photosmart C5280 of my laptop computer on the wireless network

  I have a Toshiba L750 running the operating system of Windows 7 32 bit and I am unable to print on my HP Photosmart C5280 printer. The printer is connected to my desktop which works on Windows 7 64 - bit OS with an ethernet cable. The printer works fine from the desktop and the laptop captures the internet wireless via the modem attached to the Office so that the network connection seems to be OK. I am also able to access the shared files on the desktop hard drive of the laptop which again seems to confirm that the network connection is fine. I tried to update the drivers concerned and all seem to be up to date. Previously, I was able to print from the laptop, but for some reason any, that he will no longer work. I have installed the printer software from the original CD supplied with the printer on the laptop to see if that would solve the issue, but nothing helped. I uninstalled from this software. I am at a loss and frustrated. I have also been through the printer Troubleshooter and Microsoft MrFIXIT, to anything will do. Someone out there of the clues as to what could be causing my problem? I might also mention that HP laptop of my son is able to print to this printer without any problems.

  Which, in my view, could have gone, it's that you used on your desktop printer sharing to allow other computers on your home network to access. Here's a video of Microsoft on how you can achieve:

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Let me know if that solves the problem!

  See you soon!

• Installing Center - HP Photosmart C5280 (all-in-One) - Windows 8.1

  Hello world

  Can someone help me with a Board? Question:

  Several times in the last 3 days, I tried to install the printer and scanner HP Photosmart C5280. I did everything that was recommended on the following page (and a few others):www8.hp.com/sk/sk/support-topics/windows8-support/printer-install-issues.html

  What is happening is that the downloaded file PS_AIO_02_NonNet_Full_Win_WW_140_408.exe will extract and then nothing more. Installation does not start.

  I aso did the following:

  • I tried to use HP HP printer install wizard for Windows and HP scanner doctor Utility - Diagnostic tools , but without success.
  • PC rebooted after each change
  • Blocked programs from startup such as recommended in the above mentioned link

  I will be obliged for all the advice that will be led to successful installation until I get angry.

  Thanks in advance

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  Kind regards
  Shlomi

• Cannot install for photosmart d110 driver because not digitally signed

  D110 Photosmart all-in-one.  Cannot install driver after running recovory disc.

  Windows 7 64 bit Dell Inspiron 580.

  I had to run the recovery disk after receiving the virus/malware.  It seems that all the other printer drivers are on my computer.  I downloaded the driver from HP.com several times and it cannot be found by my computer.  Manually, I tried to load it from the disc supplied with the printer and got the following error message: "cannot install driver because it is not digitally signed or not signed in the appropriate way.»

  We could continue, while reinstalling Windows would finally settle the matter. If you believe that the issue is related to the virus, you can run a scan for viruses on your computer using any anti-virus software you have. After that, reinstalling Windows could be the next step.

  Alternatively, you can try to install the printer in Mode safe, if you have not already.

  If you could mark a message with the accepted Solution if I helped you, would be great!

  Please let me know what happens. Thank you!

  Mario

• HP Photosmart C5280 All-in-one: HP Photosmart C5280 All in one will not wotk on new install

  I bought an HP Photosmart C5280 All in One several previously used and used with a dell dimension running windows xp woitout problems.  .  I rcently purchased a dell Windows 7 Professional or with a processor 15.  I reinstalled everything and get test of allignment of cartridges, and it keeps failing.  I did the partial reset and semi.  It wil not scan or copy.  Help, please.

  Hello @mgsindy,

  Thanks for getting back to me on this subject. I am pleased to hear that the issue of alignment has been resolved. However, because you get the message when copying or scanning that has occurred a "failure" and you screen gets stuck on 'Cancel' for the copy, you experience a hardware failure with your copy/scan inside your printer mechanism.

  Because the programming of your printer control the scanning/copying mechanism, I checked in an update of Firmware for your product to see if there was an update available in the corrupt case programming was causing your issue. Unfortunately, due to the age of your product, it is not these updates.

  You also mentioned that you did a semi Full reset programming on your printer, nothing helps.

  At this point, I will provide you the failure of scan standard troubleshooting steps to see if there is a chance to solve this problem.

  Step 1: Power Reset:

  1. With the printer, unplug the cable from power for 30 seconds
  2. After that 30 seconds reconnect the power cable from back in
  3. The printer should return its own
  4. Once the printer returns to the ready state, again test the copy feature.

  Step 2: Verification of power:

  Power strips and surge protectors can cause HP printers do not work properly because they can run out of power. To ensure that a power problem is not causing your Scanner failure, please plug the unit directly into the wall outlet.

  Once your printer is directly to a wall jack please test again the copy function. If the problem persists, please continue to the next step.

  Step 3: Check the Scanner Bar and light:

  1. Feed your printer
  2. Lift the lid flat on your printer and click the copy button
  3. Check if the scanner bar is moving or if the scanner lamp turns on.

  Source: A "Failure of scan" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If there is no response from the mechanism of scanning, the last step would be the printer to service.

  At this point, if the problem persists I suggest you contact the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the steps I have provided resolve your copy/scan failure. Good luck!

• Cannot install the new Windows 8 portable HP Photosmart D110

  Cannot install my D110 printer on my new laptop Windows 8.  After you insert the installation disc, the only option that appears is 'out '.  No problem printing from laptop.  However, I can't understand how to scan a document into the computer, because guests who were visible in Windows 7 are non-existent, and the screen D110 says she has to be opened from the computer.

  Any help ASAP would be greatly appreciated.

  Hello

  Try downloading the software of the printer using the HP printer installation wizard of www.hp.com/go/tools

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on "'Accept as Solution" if it has solved your problem, if others can find. "
  I work for HP

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.

  I can't reinstall HP Photosmart C5280 AllInOne. All the drivers are up to date.

  Have you done research on HP website?

  1. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00292078&cc=uk&lc=en&dlc=en&product=3204464&tmp_track_link=ot_search

  2. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00027840&cc=uk&lc=en&dlc=en&product=3204464&tmp_track_link=ot_search

  From:

  http://h10025.www1.HP.com/ewfrf/wc/searchresults?tmp_product=HP+Photosmart+C5280+All-in-one+printer&product=3204464&tmp_qt=install&LC=en&DLC=en&cc=UK

• E14 ACER: EXPIRY DATE OF CARTRIDGE IN HP PHOTOSMART C5280 ALL-IN-ONE

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL-IN-ONE PHOTOSMART C5280 HP?

  Hey @mmaxxor,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to override the expiration date for all-in-one printer, HP Photosmart C5280 ink cartridge. I want to offer you information about expiration dates.

  Expiration dates can be reset on cartridges. But expired cartridges should work correctly in your HP Photosmart too long that the cartridges have been installed on your printer before expiry. If you bought new cartridges that have already expired they likely won't work in your printer and there is no replacement for that cartridges are expired. If this is the case, you may want to consider bringing back them to the store or speaking with our Technical Support phone queue to explore additional options.

  If you had a cartridge installed in your HP Photosmart camera and would use very well and at random, to get the message that the cartridge has not expired, you should be able to hit OK on this message and continue using the printer as per normal.

  For more information on the guarantee one couverture coverage for ink cartridges and printheads, please click on here.

  Please let me know if the information I have provided solves your problem. Good luck!