Cannot install tax software because of the mistake of database on Vista.

Similar Questions

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Cannot install 12 elements because of the error in the installation of 'shared technologies '.

  Is there a definitive solution to the problem of the installation of 12 elements, which, towards the end, returns an error message "failure to install shared technologies? I tried the solutions such as deleted the. PPA files in the "Common files" folder and restarting the computer just before the installation is cancelled. None of them works. I find myself with a piece of lemon to $ 135.62.

  Thank you.

  I FOUND THE SOLUTION! Sorry to say, I've done this contempt after advises the absolutely useless 'experts' Adobe which led me nowhere. For the sake of there users encounter the same problem, here's how I did it.

  1. install 12 elements until it got to the point where it says the error message "the installation process has encountered an error installation Shared Technologies. If please restart your system and try again. »

  2. well, I didn't reboot my system or that the process move. If you look at the level of the office, the 12 items and shortcut icon already - it seems that the installation is 99.99 percent complete, except that you can not open it.

  3. while clicking on the shortcut, a message said something like "some device is missing. Download the latest Adobe Application Manager to open (or start) your evaluation software"or words to that effect. I downloaded the last Adobe Application Manager 8.0.

  4. After downloading Adobe Application Manager, I clicked on the new shortcut of 12 items, and here he opened and works beautifully. However, the warning in no. 1 above is always displayed. Never click on it, or restores the installation and you are at zero. I just shut down the computer and restarted. Elements of 12 is installed permanently. Thanks to a few DIY alterations.

  I'm not sure if it will work on other computers.  And by the way, thanks to the experts from Adobe to be nice.

• Satellite A200 - 1 M 8: cannot install Win XP because of the unseen HARD drive

  I have this laptop. I want to this laptop Windows XP, but when I do, there is: we can't found any hard in yor computers. What is it? And question 2. Are there for this laptop Windows XP drivers? Thank you very much!!!

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Cannot install Microsoft FixitCenter because the powershell download always fails!

  Download powershell from Windows xp

  Cannot install Microsoft FixitCenter because the powershell download always fails!

  Hello

  ·         Microsoft Fix it have you trying to run?

  ·         Is the question comes up with all this problem?

  For more specialized issues of Fixit assistance please post your query to Microsoft fix it Center forums:

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• Cannot access Windows Update because of the error [error number: 0xC800042D].

  Cannot access Windows Update because of the error [error number: 0xC800042D].

  Hi RetCoach,

  Please take a look at the following thread as it's the same problem that you are experiencing:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-0xc800042d-cant-install-updates/4e596d12-7601-439f-9adb-67acd994281f
  There is also an article in connection with things to try:
  http://support.Microsoft.com/kb/836941
  Hope these helps.

• Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Vijay
   
  Original title: miniport network driver extended WAN sstp

  Hi Vijay,

  You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Is this problem will soon be resolved? Thank you!

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• I can't install antivirus software, because Windows XP reports that additional protector is installed, despite having removed the malware.

  I followed the instructions on bleepingcomputer.com as suggested and am trying to run a clean boot using msconfig to disable all startup programs and the non-microsoft services. reports of msconfig access denied error when you try to change a service.

  Suite McAfee was previously installed on this system, but is more work after that "Additional Guard" has appeared and has been uninstalled due to the failure of an attempt to reinstall. The McAfee software will not be installed successfully. AVG Free edition does not install because it indicates that the additional guard already is installled. I was able to run Malwarebytes Anti-malware to remove Additional Guard system and am unable to find any remaining files or registry keys. I scanned for rootkits, but was unable to find anything. What else could happen? More precisely:

  (1) what is causing access denied error in msconfig (I get this despite running as administrator in normal mode and safe).

  (2) If, if not in the registry, the false information on guard is running might be coming from?

  Let alone msconfig for the moment. To ensure that all references to McAfee are removed, use the removal tool.

  McAfee Removal Tool - http://service.mcafee.com/FAQDocument.aspx?id=TS100507
  Reboot after running the tool.

  If the malware is really out of the system, and you can't always install AVG after you run the McAfee removal tool, you can try to reset the Windows repository that keeps track of security programs you have installed.

  Start > run > cmd [OK]
  The command prompt opens. At the prompt, type:

  net stop winmgmt [Enter]
  [Answering the prompt Yes or no with 'Yes'. See the message on the stopping services].
  CD C:\Windows\System32\wbem [Enter]
  repository.old repository ren [Enter]

  Exit command prompt and restart the system. Try to install AVG again. If it fails, you will have to enter back to BleepingComputer to ensure that your malware has been removed really. MS - MVP - Elephant Boy computers - don't panic!

• Cannot install all software: error: an application not valid win 32

  I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

  Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

  Hello

  This problem may be caused by one of the options below.

  1. the file is corrupt, missing, or bad.

  2 file is not designed for your version of Windows.

  3. the file is a virus, worm or other malicious program file.

  4. incompatibility of hardware.

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100: Cannot install recovery after having deleted the Ubuntu partition

  Hello friends,

  I have the Satellite A 100. I was using dual OS - windows vista home edition and Ubuntu. Now I wanted to remove Ubuntu and so I did the stupidest thing - directly delete the partition with Ubuntu which had the GRUB files. Then to the laptop computer restart of course the Grub bootloader wasn't there and if the computer is not started or load any OS. Then I thought that I will reinstall Vista with product recovery CD but the progress reached at 2% and then I keep getting error 1117 a failure to read. I tried so many times without success. I even tried to install XP, but it says Intel boot agent cannot make connection. And it also fails.

  Please help to reinstall Vista or XP. I'm really stuck and I learned a lesson not to tinker in mobile when it isn't those of Cup of tea!
  Any help is greatly appreciated.
  Thank you!

  Perkins

  > Now if I download EasyBCD how would I be able to run it or how should I use it?
  You will not be able to run EasyBCD because you are not able to boot Vista.
  EasyBCD can be installed only in Vista and will allow you to change the Vista Boot Manager.

  I think you need to format the entire disk HARD again should erase all partitions and must attempt to reinstall Vista.

  I recommend using a free tool called GParted LiveCD. Google for what it helps format the HARD drive!