Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

Vijay
 
Original title: miniport network driver extended WAN sstp

Hi Vijay,

You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

Thank you.

Tags: Windows

Similar Questions

  • [RESOLVED by itself] Firefox Sync: unable to connect to the server for 12 hours now

    New installation of Windows 7 64 bit
    New installation of Firefox 28

    Is my sync configuration, enter the user, pass & recovery key.
    It hangs on the audit for more than five minutes.

    Then displays error: unable to connect to the server
    See the screenshots: http://i.gyazo.com/0d19d680eae937fa27ace5df59caaa5d.png

    This happened during the last 12 hours.

    The State of the system (https://services.mozilla.com/status) Says:
    "The Firefox Sync service is running normally.
    There is no known issues at this time. '

    I tried to disable the firewall and I use MS Security Essentials.

    Please advise?
    Thank you.

    This issue is resolved itself today.

  • XT720: Unable to connect to the network for upgrades

    Hello

    I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

    How can this problem be solved?

    How to get the system through files zip for Android updates?

    Kindly let me know.

    It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

    Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

  • Unable to connect to the server for VSphere

    Hello

    I installed ESXI5.5 build 1331820 on a Dell R610, I managed to build two servers on it and I can connect servers; I can ping on the ESXI host, but I can not log on the web portal for it, can't connect using the VSphere client, I get the following error:

    vSphere Client could not connect to "IP ADDRESS".

    A unknown connection error has occurred.

    (The request has failed because of a logon failure.

    (Unable to connect to the remote server))

    I have another VMHost running the same version and I can connect without problems.

    Very confusing.

    Any help appreciated.

    Ta

    OK, so I had a moment of $$ DUmbA.

    Was the IP address of the VMHost defined as static, but not outside of the usable range, so he was doing picked up by another customer.  Set the IP address in the exclusion range, and all works perfectly.

    Thanks for the help Ben.

  • Unable to connect to the games for windows live to activate dead rising 2

    Games for Windows Live, Activation of the Production and Dead Rising 2

    Hello

    I have a problem with the activation of a product through Games for Windows Live. It is that my computer is unable to connect to Games for Windows Live via the internet even if my computer is connected to the internet. The product needs to connect to Games for Windows Live for him were allowed to be used. A username of Games for Windows Live and the password is not necessary according to the product. The first obvious solution was to turn off my firewall, restarted and the connection attempt. Unfortunately, she didn't and I don't no how to best continue. I contacted customer support and has been achieved here.
    If possible could you please give me some advice on how to connect?
    Thank you.
    Mark

    Hi Mark,

    ·         You receive an error message or error code?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if the problem still persists.

    Games for Windows LIVE: solving problems

    http://support.Microsoft.com/kb/977709

     

    Method 2: If the method above does not help, then you can read the following article and check.

    Games for Windows LIVE: you can not connect to LIVE and you receive an error message

    http://support.Microsoft.com/kb/938705

    You can also view the article mentioned for more information below:

    Games for Windows - LIVE: how to create a LIVE account

    http://support.Microsoft.com/kb/937066

    Let us know if that helps.

  • Unable to connect to the Simulator for debugging

    For some reason I can't connect to my Simulator debug. I can run my project, but when the debugging console says "pending connection on port 5768" and never makes a connection. I have tried to resolve this but couldn't find an answer

    I looked at the documentation for the developer, but he said nothing about it.

    It's very strange. Just out of curiosity, trying to put development power off mode, then running, but this time choose a different IP address. Then add back to Momentics and try to run again.

  • Unable to connect to the games for Windows Live Marketplace program, error 80048821

    Original title: games for windows marketplace

    I can not connect to games for windows live Marketplace program, I can connect to the website, end-to-end when you enter the same details, the ID and the password I get error 80048821

    Hi John,

    The question you posted corresponds to the games for Windows Marketplace and would be better suited to the XBOX community.

    You can check this link:
    For further support, please visit the link below to find a community that will provide the support you want.
    http://marketplace.Xbox.com/en-us/PC

    Hope this information helps.

  • Unable to connect to the CC for a Tamara now, server not found.

    person doesn't answer the phone support, nobody answer my emails

    Please notify.

    Hi ibftp,

    I apologise for the inconvenience that you have been facing. Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html unknown Server error.

    Also with whom were you interacting in Adobe. You receive a support ticket.

    Kind regards

    Romit Sinha

  • LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

    Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

    Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

    Lists network ID as NPI138751 hostname with no domain listed.

    The wired configuration netwrok lists as connected.

    Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

  • Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

    Original title: Unable to connect to the wireless network

    Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

    I should add that I have tried the solutions of the previous forum on this topic, and none worked.

    Hi Marilynnla,

    Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

    Read this article and follow the steps. Lets see if it helps in any way.

  • Unable to connect to the Cisco VPN you use native client: El Capitan

    I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

    When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

    * connect using the old work VPN connection: without success

    Config: Hand [server address, account name],

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    ...

    * Add new VPN connection using L2TP over IPSec: without success

    Config: Hand [server address, account name],

    Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

    Advanced [send all traffic on the VPN = TRUE]

    errsors:

    "pppd [2616]: password not found in the system keychain.

    "authd [124]: copy_rights: _server_authorize failed.

    ...


    * Add new connection using Cisco via IPSec VPN: without success

    Main config: [server address, account name].

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

    I. Journal of Console app existing/Legacy VPN connection:

    26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

    26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 405 [2580]: connection.

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

    [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

    26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

    26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    $VPN_SERVER_IP

    II. new VPN connection using L2TP over IPSec Console app log:

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

    26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

    26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

    26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

    26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

    26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

    26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

    26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

    III. New connection of Cisco VPN through IPSec Console app log:

    26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

    26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 296 [2576]: connection.

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: connection.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

    [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

    26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

    26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    It seems that I solved the problem, but I'm not sure it helped.

    After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

  • NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

    Hi all

    I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

    They read as follows:

    NtrigApplet - unable to connect to the driver: failure to open the device

    TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

    CAN SOMEONE PLEASE HELP?
    THANK U :)

    Hi the apprentice 85,

    Remember to make changes to the computer before that happened?

    Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

     

    Step 2: Put the computer to boot to determine which program is causing the problem

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to connect to the VPN

    I can not connect from home (Windows 7 Starter Edition) at the office of the wife (WinXP Home) via a VPN connection.

    Follow-up of the installation a new connection wizard. Unable to connect with the new account (done in the vpn Wizard. Unable to connect with an existing account on the server VPN system either. I am able to connect from another system of home to the system that hosts the server VPN using pcAnywhere.

    Or the other attempt gives an error 800 - VPN tunnel failed.

    Any ideas on where to start looking?

    I can not connect from home (Windows 7 Starter Edition) at the office of the wife (WinXP Home) via a VPN connection.

    Follow-up of the installation a new connection wizard. Unable to connect with the new account (done in the vpn Wizard. Unable to connect with an existing account on the server VPN system either. I am able to connect from another system of home to the system that hosts the server VPN using pcAnywhere.

    Or the other attempt gives an error 800 - VPN tunnel failed.

    Any ideas on where to start looking?

    See this section of the RRAS team blog...

    http://blogs.technet.com/rrasblog/archive/2009/08/12/troubleshooting-common-VPN-related-errors.aspx

    More than likely the XP box is behind a firewall/router which does not pass traffic GRE protocol 47 . You can test the VPN PPTP link by running the test detailed in the traffic VPN PPTP Ping and secitons on this page.

    http://TechNet.Microsoft.com/en-us/library/bb877965.aspx

    GRAP the pptpsrv.exe and pptpclnt.exe programs on the internet or from a CD of XP SP2. If the tests fail work arounds include...

    * Update the firmware on the router to a version known to pass traffic GRE protocol 47.

    * Flashing the router, if supported, with third-party firmware like DD - WRT that supports passing traffic GRE protocol 47.

    * Buying a router known to pass the GRE protocol traffic.

    * Use an alternative such as Secure Shell [SSH] and a free SFTP client such as WinSCP or TBM for secure remote access to files and folders or Remote Desktop/access control to computers on office's LAN.
    MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

  • When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

    Identification of customer's Windows 7 NFS UID GID information

    I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

    The NFS Client operating system: Windows 7 Ultimate, 64-bit

    Data captured by Wireshark

    MOUNT V1 EXPORT call 3rd party client
    Identification information Flavor: AUTH_UNIX (1)
    Length: 32
    Stamp: 0xc7065970

    Machine name: PC
    UID: 1000
    GID: 1000

    MOUNT V1 EXPORT appeal of the NFS client
    Identification information Flavor: AUTH_NULL (0)
    Length: 0

    It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

    Hello VDAEMP,

    As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
    TechNet - Windows Server
     
    Thank you

  • Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

    Original title: unable to connect to the internet

    Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

    Oh thanks for the help but I fix it myself. I just did a system restore to a month before

Maybe you are looking for