Cannot install the 64-bit Winows 7 Ultimate On A 64-bit computer
I bought Windows 7 Ultimate with versions 32 and 64 bit and tried install and reinstall the version 64-bit for 32-bit operating system appear in the system properties panel. I tried to format the hard drive and all the suggestions using Microsofts and FAQ for Windows 7, I do it offline at present and will connect to the internet later. The computer is in a place without internet access at present and will be moved later.
motherboard: ECS A960M-MV worm. 1. 0
Processor: AMD FX-6100 3.2 GHZ Hex 6 c 8 mb, 95w TDP B2 heart
memory: PNY High Performance Edition 16Gig-8Gig x 2
hard drive: Seagate Barracuda ES.2 1gig
Any help would be appeciated.
Retail Windows 7 disks clearly identify 32 and 64 bits on the disk label. Make sure you used the right disk.
Click Start > right click on computer > click Properties
Look under System Type to confirm architecture that you have installed.
If its really 32-bit, download Windows 7 Ultimate, and then perform a custom installation:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
then
How to: perform a customized Windows installation
see the section for Windows 7.
Tags: Windows
Similar Questions
-
Cannot install the 64-bit guest computer in runing Server ESXi on VMware workstation.
Help expensive,
I have my doubts with the installation of Microsoft windows server 2008 64 bit in my ESXi server running on WMware workstation. And my physical OS is windows 7 64 bit.
When I created guest computer already and I'm starting to be able to on, the followning of pop-up windows and I say Yes. It can start my .iso file but after he boot, says Windows error.
And it's the screenshot.
So that means I can't install guest PC 64 bit in my ESXi Server?
Thank you
Best regards
nested support 64 bit on ESXi running on top on workstaiton is not supported. you are better off creating this virtual machine as a virtual machine on my computer...
-
Cannot install the 64-bit operating system
I've got ESXi 4.0 installed. I checked the BIOS, and VT/NoExecute has been disabled. So I enabled them.
Still no dice on a 64 bit OS installation.
Message from EKMEDEVVM2.localdomain: cela
host does not support the VT you have configured
This virtual machine to use a 64-bit host
Operating system. However, this host is not
capable of running 64-bit or that virtual machines
virtual machine has 64-bit support disabled. For
more information, see
In addition, the console displays the following
~ # esxcfg-info | grep HV
|----HV Support............................................ 0
| - HV Replay Capable... fake
| - Reason HV Replay disabled... 1
The server is an HP Proliant 580 3, Intel Xeon 3.00 GHz. From my research, this should be taken in charge, no?
Do I have to re - install ESXi for her to pick up my new settings?
Thank you!
Everything you have said, it seems to me that the CPU is not capable of VT.
-
Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you
How does this relate to the features of Windows Update?
-
Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...
I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.
Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!
This solved my problems. Good luck with yours.
-
My laptop says cannot install the software. I tried all help. Unable to resolve.
Hello
According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.
Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.
Let me know if this helps you.
Kind regards
BearPup
-
Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan
I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz
Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)
Australia
TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001Cannot install the latest drivers below (everything worked when bought the laptop):
-Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
-Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB* DVB - T Tuner Driver *.
The EXE file extracted in the temp folder and goes no further.
The device driver shows "STK7700D" with an exclamation mark against it. See the image below.* Bluetooth Driver *.
First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).Then install attempt fails to go too far (is unable to install the driver at all).
Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.
I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!
Refer to pictures:
DEVICE MANAGER
http://I52.Tinypic.com/35cr38i.jpg1ST COURSE SETUP
http://I52.Tinypic.com/2r6jfv9.jpg2ND INSTALL PROGRESS
http://i55.Tinypic.com/jgphfc.jpgsee you soon
Dennis
> The EXE file extracted in the temp folder and goes no further.
> The device driver shows "STK7700D" with an exclamation mark against it. See the image belowTry to extract the exe from another place, not in the temp folder.
In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
Choose the installation procedure advantage and point to the folder that contains the extracted files.With regard to the issue of the BT;
Download the new battery of BT from here:
http://APS2.toshiba-tro.de/Bluetooth/Then clean the registry using the CCleaner.
This tool is freeware and can be downloaded on several different pages.
So after cleaning check if you could install new BT of the register stack. -
HP 15r-250tu: cannot install the drivers for the new laptop
Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.
Hello:
Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059
Wireless:
Bluetooth:
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1
-
Cannot install the driver/software package
HI (sorry for my English, I'm a Spanish speaker).
I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.
I tried everything I could find in the forum and on the outside.
I downloaded the driver from:
and it can run fine.
When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.
So I can't install anything, can not get the HP Solution Center and other software for analysis.
Is not the antivirus, I tried to close the shields in time, not if.
I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.
I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.
Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.
Hello
Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.
And regarding the specific error:
Start the installation and follow the steps.
Once reached the license agreement window, click the 2nd link above (using the Internet).
Make sure that the two options set as No, thank you.
Accept the license agreementt continue following the install.
You see a difference by changing these settings?
Kind regards
Shlomi
-
Cannot install the update for SP2 - 080070490 - elements not found error
Please help cannot install the SP2 update - error code 490 (080070490)
Windows Vista 32-bitCannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997or
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044 -
Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
I know I am running vista 64-bit, it states that in the system propertiesI have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
32 bit one, I looked in the system properties and it is running vista 64-bit
Other than a clean install what can I do to improve?
and if I do a clean install which are the files I need backup so I don't lose my data?Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.
Windows 7 Upgrade Advisor:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=enAlso make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com
-
Cannot install the printer. The print processor is not (winprint)
According to the scenario:
DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.
DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.
Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.
I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.
I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.
The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.
There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.
Is there anything I can do to get the job to the printer on DC2?
(And for those who ask why install on a domain controller, there is no member server in this site).
Thank you
Hello Josi,
Thanks for posting your question on the Microsoft community.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
TechNet Forum
https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServerThank you
-
Cannot install the KB3104002 80071A2D error Code
I'm going to get in trouble and cannot install the KB3104002 80071A2D error Code, Lenovo ThinkCentre Windows 7 Pro 64-bit hardware.
I ran Windows update convenience store that did not help the results of execution:
Windows Update error 0 x 80070057(2015-12-14-T-09_56_48A) NO FIXED
Registration for the service is missing or damaged FIXED
Problems to install the latest updates FIXED
Problems to install the latest updates FIXED
I downloaded and tried to run with the Windows Update Catalog, this did not help. I have set up the computer to run in a clean boot state and tried to install this did not help.
Any thoughts suggestions help.
Thank you
Doug
After masking the update sought KB3104002 updates and it found an another KB3100773 same as KB3104002 *. IE 11 updates and it failed. Ran SFC/scannow received the following Windows resource protection could not perform the requested operation. Run chkdsk/r, recovering orphaned files. Once finish if it corrects any mistakes, I'll try updates once more, otherwise I will update the PC.
A ran SFC/scannow results: verification completed 100%. Windows resource protection could not perform the requested operation. Run chkdsk /r to check the disk for errors and repair
After performing the chkdsk/r install all updates especially the KB3100773 and the KB3104002 have to do with the Cumulative security for IE 11 updates
-
Cannot install the printer. The print processor does not exist.
Windows 7 Enterprise 64 bit. I am able to install HP LaserJet printers but no virtual printer. I can not load the XPS from Windows printer or Print to OneNote. I also tried to load more than one PDF printer and none of them work. The error I keep gettig to "cannot install the printer. The print processor does not exist. »
Any ideas would be appreciated.
My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.
Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction. We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.
[Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]
You wanted to post this in case someone else ran into a similar problem.
This is what worked for me.
I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).
Step 1: Stop the print spooler service.
Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.
Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.
Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.
Step 5: Start the print spooler service.
Try to connect or install your net printer and it should work now.
I hope this work for all of you.
-
I want to install the 64-bit Microsoft Office but it ' s telling me that it is may not be installed with Microsoft Office Click - to - Run how can I install it?
Hello
First of all, make sure that your windows system runs as a 64-bit system. to check this out right click on computer > select Properties > check if it is 32 bit or 64
absolutely if your system is a 32-bit win 7, you cannot run 64-bit applocation on it.
If you are sure the config. You can install microsoft office instead of automatic execution of .exe or .msi file
to achieve this can right click on your installation CD click on explore or open
in the new Page, you will find the file .exe or .msi that you can use instead.
Please let me know if your problem space or not.
TNX
Maybe you are looking for
-
This is one of my sons "allows to get this settled once for all". I avoided data types variant when it is possible to track the performance of my apps. Some observatsions, I made over the years, I believe that; (1) operations in place cannot carry on
-
P7-1003w can run gtx 550 ti (fermi) correctly? No bottleneck?
I bought a p7-1003w and you want to install a GTX 550 TI (Fermi) graphics card. The computer he would go smoothly? or would this bottleneck? Thank you.
-
Toshiba e-STUDIO 4520C all-in-One Printer
We hurt large track of autocad drawings with images the 4520 Toshiba from a 64-bit Windows 7 pc. XP 32 bit machines have no problem with the same plot, which seems to indicate a driver on 64-bit pc problem. Anyone facing this problem and found a so
-
FDMEE: Data load rule problem
Hello everyone,I have a question to FDMEE loading the data from a flat file to the validation step because a wrong to the mapping of the data rule it look likeIt is not an entity or an accountWhat is the fault in the charge of mapping data?
-
Why must I have a MS account to use windows 8?
Why should I connect just to use windows 8 on my PC? I don't want to connect to anyone at this time. I want to view the calendar and check my e-mail.