Cannot install the KB3104002 80071A2D error Code

Similar Questions

• Cannot install the updates, 800700c error code 1

  Cannot install updates get message failed and 800700c error code 1. required healp please.

  Hi Michael,

  You can try the steps in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/cannot-install-Windows-updates-receive-error/ced31940-101F-4312-BB2A-acf0c5eaa35a

• Cannot install the update 80070103 error code

  Cannot install updates error code 80070103

  If you get this error, you don't need the update. Do not install hardware updates from windows update. Get the drivers from manufacturers.

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

• Cannot install the Windows update error code: 0x80072efd.

  OT: Laptop problems.

  I have the following problems: has) the update of Windows Defender does not work, always ends upward with an error code: 0x80072efd,.

  (b) installation of Windows Update problem is not solve itself now for some time - quite impossible update.

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  or

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

• Cannot install the update KB955839 - error code: 80070490 & vista Service Pack 2

  I have vista ultimate and have been unable to install KB955839 for quite awhile now, I can install each update except KB955839.
  Without KB955839 installed, I don't not offered Servicepack 2, as an update in windows update, however when I hide it I'm offered servicepack 2 as an update.
  Installation fails every time however.
  I tried the two installation manual and windows install update for updates without success.
  Update Service Pack 2 appears to be related KB955839 install successful
  I tried most of the patches in this forum

  Are you download and SAVE and then go and RIGHT CLICK RUN AS ADMIN? Triple
  Make sure you download the correct version.

  Describe what is happening? Error messages or?

  Try the fix here:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/ Rob - bicycle - Mark Twain said it is good.

• network print: cannot install the printer 0x0000046a error code

  can see printer on the computer XP Home and get where Vista connect to the printer receives the error message "cannot perform complete error 0x0000046a.

  solved my problem: as much as I tried to blame Vista it turns out be a XP problem [computers XP is sharing the printer and Vista use this printer on a network connection. [Q177078 a google search] to microsoft site created IRPStackSize as non-existed in 'settings' then the value of IRPStackSize > 15.

  RESOLUTION:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this behavior, increase the IRPStackSize value in the registry:

  1. click on Startand then click run.

  2. type regeditand then click OK.

  3. navigate to the following key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters

  4. in the right pane, double-click the IRPStackSize value.

  NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:

  1. in the folder registry settings, click on the right pane.

  2. point to new and then click DWord value.

  3. Type IRPStackSize.

  IMPORTANT: Type "IRPStackSize" exactly as it is displayed because the value name is case-sensitive.

  5. [double click IRPStackSize] change the decimal number Base.

  6. in the value data box, type a value that is greater than the value that is listed. [default below]

  If you created the IRPStackSize value using the procedure described in step 4, the default value is 15. It is recommended that you increase the value of 3. [if the previous value was 11, type 14]

  7. close the registry editor.

  8 restart the computer.

  If the problem persists after you complete the previous procedure, try to increase the value of IRPStackSize even more. The maximum value for Windows 2000 is 50 (hex 0 x 32).

  If you are running Windows NT 4.0 and the problem persists after you complete the previous procedure, you may need to apply Windows NT Service Pack 4 or Service Pack 5.

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is fr...

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is from 0 x 0xC (4-12) 4. Windows NT 4.0 with Service Pack 5 or later ignores values less than 0x7.

  In Windows 2000, the default value of IRPStackSize is 15 and the range is from 11 to 50. In Windows XP, the default of IRPStackSize is 15 and the range is from 11 to 50

• Cannot install the update KB955839 - error code: 80070490

  I have Windows Vista Home Premium.  The above update will be installed not - the update regarding summer time.

  Hello Michael,

  I suggest to download and install Service Pack 2.  Here is the link.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!

• Window 7 unsuccessful backup, error message "the system cannot find the specific file" error code: 0 x 80070002.

  I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002.  He said no specific file that causes the problem.

  Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS?  Enjoy diagnose and advise!

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you follow the steps in the link below and check off the question:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:

  http://support.Microsoft.com/kb/979281

  I hope that the information above helps you.

• Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

  Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

  -------------------------------------------------------------------------------------------------------------------------------------

  Details of the update of Windows editor

  Problems found
  Registration for the service is missing or corruptService registration is missing or damaged do not fixed
  Sign up for the service Reset Succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Check verrouillesfichiers missing or damaged missing or corrupt files fixed
  Repair missing or corrupt files Succeeded
   
  Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
  Reset Windows Update of the data store Succeeded
   
  Verified issues
  Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
  Some security settings are missing or have been changedSome security settings are missing or changed Checked
  Key of registry corrupt Patch registry Patch keysCorrupt
  Detects the hotfix or corrupt cache Checked
  Windows Update services aren't runningWindows update services do not run checked
  Encryption services components are not the registeredCryptographic service components are not registered Checked

  Problems found details

  Registration for the service is missing or damaged do not fixed
   
  Sign up for the service Reset Succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded

  Check missing or corrupt files fixed
   
  Repair missing or corrupt files Succeeded
   
   
  Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
   
  Reset Windows Update of the data store Succeeded

  Issues checked the details of the detection

  6 environment variables Windows Update are incorrect Checked
   
  Restore the Windows Update environment variables is not running
   
   
  Some security settings are missing or changed Checked
   
  Reset the security settings is not running
   
   
  Key of registry corrupt Patch Checked
   
  Detects the cache fix corrupted or missing
  Fix registry patch not working
   
  Fix registry patch problems
   
  Windows Update services do not run checked
   
  Required for Windows Update registry files works not
   
   
  Encryption services components are not registered Checked
   
  Save the cryptographic components not working

  Details of detection

  The service status

  ---------------------------------------------------------------------------------------------------------------

  Can someone point me in the right direction to solve this problem?

  Thank you.

  Original title: Windows Update will not install on the new load XP

  Hi all

  Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

  I clicked Start, click on run and typed the command following, and then click OK:

  Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
  Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

  I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

  This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

  However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

  I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

  Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

  Hi Dan,.

  From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  I hope they are all present, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
  (If you do not have the command run in the start menu, hit the Windows key + R, instead)

  Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

  Here are the next steps.

  Copy / paste this command in the field to run, and then click OK
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

  The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

  Then restart the PC again and continue with the rest of the troubleshooting steps.

  Click on start, run and copy/paste the following and click OK: services.msc

  You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

  Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Restart then try and start the BITS.

  If you get the same error again, copy / paste the following text in the field run and click OK:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then try and start the BITS.

  Let me know how you please.

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows update 80070641 error code

  Original title: How to install Windows Installer under Vista when it is not under Services in the computer or in the section programs? I can't add or remove programs without it.

  I went to download 17 updates and not a single one would download and install. I tried all the suggestions on go to services and find the installer of Windows, but I don't have it anywhere on my computer. I tried to download version 4.5 on my Vista to Windows Welcome page and it said that it was not for my system.

  Error codes received: 641 and 80070641

  I can't even uninstall anything, without getting the error that Windows Installer can not be used because it didn't download correctly.

  Any further suggestions?

  Hello

  You did changes to the computer before this problem?

  Method 1: Run the commands.

  (a) click Start and click run.

  (b) type cmd into the Run box and press enter.

  (c) type msiexec.exe /unregister, and then press enter.

  (d) msiexec/regserverto type, then press ENTER.

  Method 2: If the problem is not resolved, you can try the procedure described in the supplied knowledge base article and check.

  How to fix problems connecting to Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/818018/en-us

  Method 3: Fix the term.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 4: If the problem is still not resolved, try the steps in the below link.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Hope this information is useful.

• try to install the updates and error codes keep coming, 80070490, 663, 9 c 47 help!

  I'm trying to update to windows Messenger and when I update it says that you must install windows platform update, when I try to do these come error codes, is installing other updates, but not those... Cannot use messenger at this time because of this...

  Hello

  You did changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/958044