Program will not work because it asks me to connect to internet even if im already connected.

Similar Questions

• Update XP KB2707511 and dos programs will not work. I get an error in NTVDM 'the parameter's imcorrect

  After loading the high windows update KB2707511 my BACK program will not work. I get an error in NTVDM "parameter is imcorrect" and the program closes.

  Original title: XP update programs KB2707511 and back

  Have you tried to uninstall it to see if that helps?

• "Notification Dll has not been registered, program will not work correctly.

  Dell Inspiron 2200 windows configuration error "Notification dll has not been registered, program will not work correctly.

  I checked several sites to try to fix this error without success. I have uninstalled, reinstalled, tried an older driver.

  go into system and con +, with no luck at the moment. Ksperov is installed where an antivirus trying something here now, doubt it will work. I noticed that many people have had this error, but I have seen almost nothing that corrected the error?

  With all the Dell laptops out there, someone has fixed it now. Also I tried to record a certain dll with no luck.

  I can't find a dll that is labeld notification.dll?

  The wireless works, but it is worsening.

  Thanks, Bruce

  Hey Brucefl,

  Try to restart in a clean boot to see if this error message is caused by a third-party program/startup process. To do this, follow the steps in this troubleshooting guide:
  How to configure Windows XP to start in a "clean boot" State

  If the restart in a clean boot prevents the problem to appear, take a look at the list of programs and services (do not forget to check her hide all Microsoft services box on the Services tab) tab of msconfig. Try disabling the programs and services to see if you can isolate what programs and services is causing this error message to occur.

  Hope that helps, I look forward to hearing from you.

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Notification of wireless configuration, dll has not been registered, program will not work correctly

  notification of configuration wireless dll has not been registered program will not work correctly

  Hello

  1. when the message's product?
  2. don't you make changes to your machine before the problem?
  3. What is the number of brand and model of your computer?
  4. have you updated your wireless adapters?

  I would like you to follow the steps mentioned below.

  Step 1:

  Run SFC analysis on your machine to verify if this is related to the missing or corrupted system file.

  Step 2:

  Test in safe mode with networkproblem.

  Let us know the status of the issue.

  Step 3:

  You can also do System Restore to the point that your computer was working fine.

• Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  It is the responsibility of the manufacturer of the device to provide device drivers that allow the device works in an operating system. You will need to contact the manufacturer of the device for info and software.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  This message appears whenever I try to open Video Edit Magic, I already turned off Norton.
  Try to adjust the compatibility setting and run...

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

• Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Original title: rtr - patcher.bat

  Brian

  You need to contact the developer of the game, because they are the only one who can help you.  We support Microsoft software & hardware here.

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

• iOS 9.3 will not load because you are no longer connected to the internet

  iOS 9.3 will not load because you are no longer connected to the internet on my phone 5

  Apple has temporarily removed the update due to activation problems then you won't be able to update at this time.

• Opening in maximum size program will not work

  I was unable to get a program (ok - it's FreeCell) to maximize.  I tried this dimensioning of the taskbar using the arrow keys on the keyboard instead of the mouse.  He fills the screen from top to bottom, but not more than straight left.  It freezes and will not larger size by about a third of the width of the screen/monitor (with a computer 17 "laptop).  I went to the properties of the start icon and run selected enlarged (did not work) reduced to a minimum (of work); tried again, but the program will not stretch or size Full.  In a small size, you can move the window of the program anywhere on the screen, but it will not maximize from anywhere to full size.

  Thanks for the help!

  How long you are facing this problem?

  I would appreciate if you please perform following steps.

  Click Start and then click Run.

  Type SFC/scannow. (Please note that there is a space between SFC and/scannow)

  Click Ok to start the System File Checker.

  Insert the Windows XP installation CD when and if she asks.

  It will repair all damaged or corrupt system files.

  Please check your problem.

  Let me know if you encounter other problems.

  K M JAI Support general (INDIA)

• A certain NUMBER OF MY PROGRAMS DOES NOT WORK because WHAT I HAVE LOST A__FILE, (Framedyn.dll) was may find this file? Thank you

  THIS FILE (Framedyn.dll) is part of the curriculum that cleans up the hard drive. SYSTEM RESTORE AND A NUMBER OF OTHERS WHO WILL NOT WORK UNTIL I HAVE TO REPLACE THE LOST FILE
   
  OLDW8LIFTER
  *****@****

  Oldw8lifter,

  Welcome to the Microsoft Answers community.

  This problem may occur if one of the following conditions is met:

  ·         The %SYSTEMROOT%\System32\Wbem\framedyn.dll file is missing or damaged.

  -or-

  ·         The Windows Path environment variable does not point in % SYSTEMROOT%\System32\Wbem.

  To fix:

  Replace the Framedyn.dll file

  1. click on Startand then click run.

  2. in the Open box, type %systemroot%\system32\dllcache, and then click OK.

  3 right-click framedyn.dlland then click copy on the shortcut menu that appears.

  4. click on Startand then click run.

  5. in the Open box, type %systemroot%\system32\wbem, and then click OK.

  6. on the Edit menu, click Paste. If you are prompted to replace the existing file, click Yes.

  Check the System Variables

  1. click on Start, right-click my computerand then click Properties on the shortcut menu that appears. If you receive the following error message, click OK:

  Rundll32.exe - Unable to locate component

  This application has failed to start because framedyn.dll was not found. Reinstalling the application may fix this problem.

  2. in the System Properties dialog box, click the Advanced tab.

  3. click on Environment Variables.

  4. under System variables, click path, and then click change.

  NOTE: If no Path variable is listed, click new. In the Variable name box, type the path.

  5. in the Variable value box, type the following:

  %SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\wbem

  6. click OK three times (whenever you can).

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I load a program, it is said that it will not work because it says ' side by side Configuration is incorrect. "

  When you try to start a game I downloaded, I get the mssg above...

  "Side by side configuration is incorrect"

  and the program does not load

  Hello

  Be sure to check with the support of the manufacturer game, their documentation online and ask in their forums.

  ---------------------------------------------

  Check with the developers of the game.

  Install or re-install the redistributable packages C++ - the date of the program that should help errors
  determine which is necessary. I would install all 3 of 2005 SP1, then 2008 SP1 and 2010.

  Package redistributable Microsoft Visual C++ 2010 SP1 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=8328

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5582

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5638

  There are x 64 Bit packages if necessary:

  Package redistributable Microsoft Visual C++ 2010 (x 64) SP1
  http://www.Microsoft.com/download/en/details.aspx?ID=13523

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2092

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=18471

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">