Cannot install the update of system Thinkpad 3.14
Hello world
I have a T60 with the latest Windows SP3. I tried to install the latest version of the update of the Thinkpad system and when it has almost finished, I got this error:
-There is a problem with this Windows Installer package. A problem encountered as part of the installation did not finish as expected, contact your provider staff or the support package. Action StartSuService.EXE, location: C:\Program Files\Lenovo\...\startupservice.exe
After that, I can start the update of the system anyway, but he never successfully install my update.
Someone knows any tricks to overcome this problem?
Thank you
JM
I tried to reinstall 4 to 5 times and it download it again 3 times it was not that.
In any case, I found the problem. It was the services that had been (for some unknown reason) disable:
So in services.msc I rolled "System update" Automatic, and then start the services and it doesn't work.
Sorry for the trouble and thanks for the help!
Tags: ThinkPad Notebooks
Similar Questions
-
Cannot install the update error
I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?
I would try to update via iTunes
Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3
The time that the phone is detected, choose software update
If the phone is not detected - see here
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
OR
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
Cannot install the update error Code Ox800B010B
Original title: cannot install the update
Cannot install the update KB2686827
Error Code Ox800B010B
Hello
1 have had any changes made on the computer before the show?
2. What is the full and exact error message?
3. when exactly you get the error message?
4. the problem occurs for all the updates?
Method 1:
I suggest that return you the item and run Microsoft fix:
Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/
Method 2:
Test the problem in clean boot mode.
How to configure Windows XP to start in a "clean boot" State
-
I have an App World app, the first time, it's a free app (ver: 0.9), but later I changed it for a paid app. recently, I published a new version of this app (ver: 1.0) and free package upgrade.
But users who have installed my app when it's free cannot install the update!
I Can't download the update. I keep getting the following error "There was a problem installing...please try again." I've retried many times and reset my device but nothing works.
software shows an update to Version 1.0 from .9 however, the update errors out and fails to download.
They tried to delete the app first, but they can not reinstall it, even if they want to buy, but App World allow them to do!
I tried uninstalling it and now I can't reinstall it. ???
I can not even reinstall from appworld. Let alone purchase.
but i try to paid for it and when i go to do it, it dont allow me
It is really strange, what do I do?
I feel your pain, but you can't do much. This is a known issue with AppWorld during the passage of the free paid, thats why this option is no longer available for providers.
The only way to mitigate the damage, push a paid upgrade, say version 1.1. Make sure that the upgrade price paid matches the original price of app, otherwise it would be confusing to users.
Advantages of such an approach:
-Users who want to pay will be able to download the upgrade, you get the money
Disadvantages:
-You will get a lot of negative comments from users who have as free version
-Those who have already purchased as paid app will have to pay to upgrade too
-
Cannot install the update / PC
Cannot install the update recent-8/13/2014. I click on install now Muse disappears and nothing happens.
Hello
Please try to install it from the creative clouds. If creative cloud is not installed on your computer, try to install it from https://creative.adobe.com/products/creative-cloud
Kind regards
Aish
-
Cannot install the update error KB2718704: 0x8007F064
Original title: XP, error Code (KB2718704) install failed: 0x8007F064: after that I tried to solve this problem, because as far as I know, but still, there is no, then how should I do?
Microsoft Update tried to install the update for Windows XP (KB2718704) whenever I closed my computer, but it could not include my manual installation.
Hello
Method 1: Run the fixit
Check out the link:
The problem with Microsoft Windows Update is not working
http://support.microsoft.com/mats/windows_update/.
Method 2:
Check out the link:
You cannot install some programs or updates
http://support.microsoft.com/kb/822798.
Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows XP
http://support.microsoft.com/kb/322756/.
You can ignore the 7 method to perform the upgrade in-place.
Method 3: Scan SFC
SFC scan will find all missing or incorrect system files and repairs them.
File system (CFS) Checker
Method 4: Install the updates to the clean boot
Step 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
Check out the link:
How to configure Windows XP to start in a "clean boot" State
http://support.microsoft.com/kb/310353.
Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.
Step 2: Install the update manually
Check out the link:
Update for Windows XP (KB2718704)
http://www.microsoft.com/en-us/download/details.aspx?id=29975.
-
Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard. He gets up then I get the message "set up cannot copy the file msado15.dll.
HelloYou did changes to the computer before the show?
Method 1
I suggest you to run the fixit from the following link:The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
I suggest you register the Msado15.dll file required.a. Click Start and then click Run.
b. in the run dialog box, type the following commands in the Open box and then click OK.Regsvr32.exe "
>" The
> placeholder is the absolute path of the file Msado15.dll. The following examples show how you can specify an absolute path:
Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
If the Msado15.dll file is saved successfully, you receive a message similar to the following message:DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.c. click OK.Method 3
I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: Make sure that you reset the computer back to normal once the diagnosis is complete.
Method 4
I would say that you can download and install the update to the clean boot from Microsoft download center.Update security for Windows XP (KB2698365)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228 -
It cannot install high priority updae KB2572067. Get the message saying updates cannot be installed. I could use some help with this problem.
Hello
Let us know the Setup error code:
(a) click Start, click all programs, and then click Windows Update or Microsoft Update.
(b) on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
(c) in the status column of this window, find the update failed to install, and then click the red X.
(d) a new window opens that displays the installation error code.
Method 1: Boot your system in clean boot mode, and then run Windows updates.
Try now to the KB article to perform the clean boot:
http://support.Microsoft.com/kb/310353Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.
Method 2: Disable the security software installed on your system and then try to run Windows updates.
Important: Please remember to turn it on once you install updates.Method 3: Keep the computer in clean boot mode and disabled security software, please download the update manually from the link provided below and install it.
Note: Please do not forget to start the system in normal mode and activate the security software, after you install the update manually.http://www.Microsoft.com/download/en/details.aspx?ID=27715
Method 4: Try the steps in the article mentioned below to repair the .net Framework in your system:
http://support.Microsoft.com/kb/923100 -
Cannot install the update KB2698023 get error 643
Original title: Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2698023) - installation failed repeatedly.
I continually get error 643 trying to install this update. I tried to restart, ran MrFixit and downloaded the update of the site Ms. Installation failed once again.
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You can not install the update Error KB2698023 and get 643
The issue may be due to corruption of the .net framework components.
I suggest you follow the steps mentioned below:
Method 1: Refer to Microsoft article
Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643 .
Method 2:
See the article mentioned below:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: When checking out a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Update: Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)
Download size: 3.6 MB
Update type: ImportantHad this problem for a few months now. whenever I run the update (almost every day), it fails. Unknown error error code 66 a.
Lots of space on hard drive
any advice? would or what information you need?
Remove Microsoft .net Framework 4.0 with the .NET Framework Cleanup Tool http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx >, reinstall Microsoft.NET Framework 4.0, and then install the update.
OR
See this response archived from a previous thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8bffeaf1-bf93-4b31-9609-829399ed6afd>
-
Cannot install the update properly
Hello. I use Windows vista basic and I've updated my com on a regular basis. However, there is a particular update, I'm unable to install KB955430, which release date is 05/15/09. It comes with a bunch of other updates on the same day, I have install successfully. However, it fails each time, which gives the error code: 800F082F, asking me to restart the computer. I get the configuration update message every time I stopped the com and launch it. Although it doesn't matter how many times I tried, the update fails. I also tried to download the update from microsoft web itself, "Windows6. 0-KB955430 - x 64. However, it is said that it is not intended for my com. Please help, thanks.
Hi kuchimeh,
Thank you for visiting the Microsoft Vista answers Forum!
This is a known, problem if you install this update through Windows Update, you receive the 800F082F error.
Cannot install this update with the other updates. Therefore, if you have already installed other updates without rebooting, and then you try to install this update, you may receive error 800F082F. To resolve this issue, restart your computer, and then install this update again.
To install this update, please follow this knowledge base:
Description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009:
http://support.Microsoft.com/kb/955430
I hope this helps.
Let us know if you need more assistance.
Kind regards.
Nicolas Mathieu
Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
Error code: 80070057 (cannot install the update KB982519)
Error message when updating a program 'recommended '. Please... need help.
Hi Big Fish 2.
1. are you able to install other updates successfully?
2. do you have security software installed on the computer?
Method 1
Download and run the system preparation tool and try to install the update.
System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work.
Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
http://support.Microsoft.com/kb/947821Method 2
Download and install the update manually using the link below and check out them.
Update of application compatibility for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: June 2010
http://support.Microsoft.com/kb/982519
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Vista - Error Code: 80240016 (cannot install the update for my mouse)
error code 80240016: updated of the mouse, I can't seem to install correctly under windows vista, HP dv9727cl laptop.
Help please. Thank you.Synaptics PS/2 PORTtouchpad
0 X 80240016 WU_E_INSTALL_NOT_ALLOWED
Tried to install so that another installation is in progress or the system has been
in the meantime a mandatory reboot.
and/or
http://support.Microsoft.com/kb/957307
Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
Windows Vista and Windows Server 2008
Follow these steps:
- Close the browser Windows Update or Microsoft Update Windows.
- Click Start, type command prompt, in the list of results, right-clickguest, and then clickrun as administrator.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. - Type the following commands. Press ENTER after each command:net stop wuauserv
net start wuauserv - Close the command prompt window.
- Try to install updates again.
TaurArian [MVP] 2005-2010 - Update Services
-
Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator. I didn't do it, then?
Question stands as is.
Hello
1. have you made any changes to the computer before the show?
2. What antivirus application is installed on the computer?
3. What are the different user accounts on the computer?
This problem occurs if Windows Update has been disabled by one of the following settings:· Group Policy
· System policy· RegistryI suggest you follow these methods and check.
Method 1: Perform the clean boot and try to install the updates.
To do this, follow the steps in this link:
http://support.Microsoft.com/kb/310353
NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.
Method 2: Try to turn on the auto update by following the steps in the link below.
How to configure automatic updates by using Group Policy or of registry settings
http://support.Microsoft.com/kb/328010
Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756
How to back up and restore the registry in Windows
Method 3: Turn off the antivirus application and try to download the updates and check.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 4: Perform a full scan of the computer using the following antivirus applications.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps!
Maybe you are looking for
-
External microphone not detected and faulty internal mic on Satellite Pro U400
I have had several headphones with microphone and taken headphones 3.5 and the laptop just will not detect them. I tried to disable the internal sound system, or just the MIC internal, but not luck. The internal MIC is a (stronger if the external mic
-
Satellite A660 - what is the difference between 18 and 18
I received my A660 PC World of yesterday (on the purchase of the line) the model I took after the local store to check models, the visit was the A660 18 d, any further communication with them under this model, but when it arrived yesterday it was an
-
Read analog output channel value internally
According to this you can read the values of analog output of return without having to physically connect the wires. By using the technique described in the example given (DAQmx_Read_Output_Internal_Channels.vi) I'm reading a current area of OCCUPANC
-
After @ 2 minutes inactivety, Vista disconnects me. A bit like going to screen saver, but his return to the logon screen. How can I stop this from happening?
-
Failed to create Direct 3D device
Hello. I have a problem with my computer. I have playe Ace Combat: Assault Horizon.After finish, I uninstall. Now, I installed it on my computer, but when I start the game, this error pops up: "" could not create Direct3D device or initialize Games f