Cannot install the update to windows. Error 66A and 643

Similar Questions

• Cannot install the updates, I get error 0 x 643.

  Original title: Update Installation XP

  Updates the last XP installation failed error Code error messages: 0 x 643 tried three times. Can anyone help

  Hi, thanks for the reply, received an answer from microsoft and finally had to uninstall and reinstall, it now seems to be able to update without problems. Thank you for your reply,

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Cannot install the update KB2698023 get error 643

  Original title: Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2698023) - installation failed repeatedly.

  I continually get error 643 trying to install this update.  I tried to restart, ran MrFixit and downloaded the update of the site Ms.  Installation failed once again.

  Hello

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

   

  You can not install the update Error KB2698023 and get 643

   

  The issue may be due to corruption of the .net framework components.

   

  I suggest you follow the steps mentioned below:

   

  Method 1: Refer to Microsoft article

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643 .

  Method 2:

  See the article mentioned below:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Note: When checking out a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Cannot install the update to Windows KB2656369, 2604092, 2656352 and 2686828

  Original title: unable to install updates

  I can't install upates KB2656369, 2604092, 2656352 and 2686828 always failed

  Hello

  1. you have any security program installed on the computer?

  2. do you get error messages or code?

  3 did you last modified the software on the computer?

  Method 1:

  I suggest to disable any anti-virus program and then try to install the updates.

  Note: Don't forget to activate the program once you have completed the troubleshooting steps.

  If it works fine after that the disabling of the software security, then you should get in touch with the security software provider for assistance.

  Method 2:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  http://support.Microsoft.com/kb/2507641

  Method 4:

  All updates that fail are for. NetFrame œuvre be uninstall and reinstall. NetFrame work. That's why I also suggest you to follow the steps from the link and check.

  http://support.Microsoft.com/kb/2507641

  Hope this helps and keep us posted.

• Cannot install the update to Windows Live Photo Gallery

  Original title: window 8 photo gallery update.

  I've tried everything. I can't update my photo gallery

  Hello Sheryl,

  I'm sorry to hear that you are facing problems with the photo gallery.

  This update will be offered to customers who have a 2008 version of Windows Live Photo Gallery. These updates will be automatically installed if you chose to activate updates must be installed on the system automatically.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Significant changes have been made on the computer before this problem?

  2. What exactly happens when you try to update your photo gallery?

  3. Get you any error message\ code by updating your photo gallery? If Yes, please indicate the error error code complete message\.

  4. You are able to open the photo gallery?

  5. You are able to install other updates to windows successfully updates?

  I suggest you to refer the link given below:

  Information about the update of Windows Live Photo Gallery

  http://Support2.Microsoft.com/kb/946486/en-us

  Please update with the information to help you further on the issue.

  Thank you

• "Cannot install the update of Java error: sp.dll ' is corrupt.

  Original title: installation of Java Update

  While the update of Java SE 7 7 could not complete the installation.  Screen rises 'sp.dll' is corrupt. How to fix the damaged file and install the update.

  Hello

  You can manually try to download the update of Java from the following link:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If the problem persists I suggest you to contact Java support for assistance:

  http://www.Java.com/en/download/support.jsp

  See also:

  http://www.Java.com/en/download/help/index.XML

  Let us know if it helps.

• Cannot install the update to Windows on a Toshiba protégé R705 i3

  Original title: Toshiba protégé R705 i3

  1 important update, it downloads the update of windows, restarted the laptop, then restores the update, restart again and it does not install it. That happens very frequently, please help.

  OS is windows 7

  Hello

  Please contact Microsoft Community.

  In a first step of troubleshooting, I suggest to check the version history to see if there are updates that have a failed State and let me know the description of these updates.

  Step 1: Check the update history

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Let me know if the description updates that have a status of failed.

  Step 2: Manually try to install updates from the Microsoft Download Center

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Step 3: Run Windows Update Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Step 4: The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps.

• Error 0 x 80240036, cannot install the update to windows

  Original title: [error number: 0 x 80240036]

  whenever I try to update windows, it fails & contains the number of error: 0 x 80240036.

  Hello

  Have you made changes on the computer before this problem?
  I suggest you to check the updates could be the cause of the problem. To do
  (a) click Start, click all programs, and then click Windows Update or Microsoft Update.
  (b) click on view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer.
  (c) in the status column, locate the update that do not install and then click on the red X.
  A new window opens that displays the installation error code, note the error number.
  Provide us with the number if the issue not be resolved after following the methods.
  Method 1:
  I suggest you to run the FIXIT from the link below and check.
  The problem with Microsoft Windows Update is not working.
  http://support.Microsoft.com/mats/windows_update/
  Try installing updates and if the issue gets not solve, go to the method 2:
  Method 2:
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Disclaimer: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  And take note: while running chkdsk on the drive if bad sectors are found on the hard drive of whenchkdsk trying to repair this area if all available on which data may be lost.
  
   
  Hope this information is useful.

• Cannot install the update of Windows Vista KB948465 - error code 80070490

  I try to install the Windows Vista KB948465 update (Windows Vista Service Pack 2), but he continues to display code error 80070490.

  According to the history of my update, update KB948465 is not install altogether 29 times since I first tried on September 11, 2009 to date, November 14, 2009.

  Help!

  Hey,.

  Follow the steps described in the article in the link below. This should solve. Scroll down, the end to see the steps for Vista.

  http://support.Microsoft.com/kb/958044/en-us

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Error 0x800b0100, cannot install the update to windows

  Change the title: update windows

  Why I get this error code 0 x 80070103. while I'm updating of windows

  Hello

  This problem may occur if one or more of the following conditions are met:

  a. If the Windows Update database is damaged.

  (b) if the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  c. If a required system file is incorrectly registered.

  I suggest you to follow the described measures under article here: Windows 8 or Windows RT at the following link.

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  http://support.Microsoft.com/kb/956702/en-us

  Please let us know if the problem persists. We will be happy to help you further.

• Cannot install the update to windows KB2633171

  Repeated attempts to install fail.

  Followed MS steps to manually load this file *.exe to my computer then tried to run the file to install and got the following:

  In safe mode:
  KB2633171 Setup error
  The file c:\windows\system32\ntoskrnl.exe is open or in use by another application. Close all other applications and then click Retry. Cancel and the message an internal error has occurred, KB2633171 do not have.

  In normal mode:
  KB2633171 Setup error
  c:\windows\system32\ntkrnlpa.exe file is open or in use by another application. Close all other applications and then click Retry. Cancel and the message an internal error has occurred, KB2633171 do not have.

  As others have said, of course, these files are always open & don't know what this means and why I can not install this update. Frank F is the only 1 indicating a solution using windows Defender to remove the possibliy a Trojan horse. He said "but mistakes like that tend to demonstrate corruption malware for me.» That's why I tried the new tool of Windows Defender. I have had no problem download and the creation of the bootable CD if it was a slow process. As I said the scan found and cleaned 1 Trojan horse. The stand-alone Installer worked after that. I posted my good results in the hope that it might help someone else. I didn't take no further action beyond that. ».

  Microsoft did not get back to me still looking at me on this case. Anyone?

  http://support.Microsoft.com/kb/2633171

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

   
  or

  Related topics:

  Security for windows XP KB2633171 update is not installed
  Update security for Windows XP (KB2633171) installs
   

• Cannot install the update to Windows that is offered several times

  original title: I have vista 64-bit! Windows Update, it will not download after the normal download.  Statement said there was a problem "all time"?

  I have vista 64-bit home Professor. Windows
  Update. Whenever I boot, I get an icon of automatic download of updates from windows update.
  It downloads normally!

  When dealing after a while, I get a message there was a problem and the system has been
  Back to the old system. This happens whenever my system opens?
   
  My computer works fine, but I did not have a windows far in I can't remember! ?
  I need help here.

  John

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  Remove all excess icons (each of them, essentially) of the taskbar (lower-right)

  As downloads fail, when you run the patch, choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose it's aggressive mode.

  Then reboot and see if the download updates now.

  `~`

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  `~`

  In the control panel choose reports on problems and Solutions ( problem in the START search box type), go to historical problem, right click on your error and choose check for the Solution. You can also examine the details.

  In administrative tools choose reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date.

  Please let us know if it did or did not help to solve your problem

  UTC/GMT is 20:06 on Monday, December 12, 2011

• Cannot install the update from windows update mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Name of the update, more precisely, what is the KB number for her?

  Is this an update optional, important or essential?

  If its in option, you can ignore and hide the update by right clicking on it in the Explorer of Windows Update and click on Hid Update.

  If its important or essential, try to download from http://www.microsoft.com/downloads

  Also, try to close all programs and windows application when you attempt to update.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Try to update again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP