Similar Questions

• Cannot install Ubuntu Server 64-bit

  Hey, I have a doubt, I think that my processor supports 64-bit operating system, then why I install Ubuntu Server 64-bit on VMWare?

  My processor is Intel Pentium Dual-Core T3200 2.00 GHz

  Some conditions must be met before a 64-bit guest OS could be virtualized:

  1. the transformer must be able to handle VT

  2. in the bios, this option should be enabled

  3. the host operating system should be a 64 bit OS in order to get good performance of the guest

  Theoretically, it might be possible to run OS 64 - bit almost under a 32-bit host OS, but performance will be poor due to the emulation instead of virtualization. If this is not an option.

• UCS C220 M3 - cannot install Ubuntu 14.04 OS

  Hi all

  I'm new to Cisco servers and we bought 3 servers UCS C220 M3.

  For one of them, I would like to had installed an operating system Ubuntu (14.04). I tried hard but unsuccessfully to install the operating system on the server.

  On this server, I have only one physical hard drive, because I'm not really interested in getting the RAID on this server. Initially, I started on a USB with Ubuntu image and installation worked fine. Then, I tried to boot from the hard drive, but it was impossible to find the hard drive in the boot menu.

  You have no idea about it? I suspect that this is because the RAID of LSI sotfware controller is enabled and one thing to note is that I have not installed FlexFlash Cisco's SD card. Is - this mandatory? When I try to configure RAID 0, so I'm not able to install ubuntu (impossible to detect the drive with the Ubuntu Installer).

  Thanks for any help!

  Alex

  If you set the UCS SW storage battery in AHCI mode, Setup see your local hard drive then?

  What is the hard disk that you installed? Depending on whether you install a 32-bit or 64-bit OS and size of the disk you are installing, it may require that the UEFI boot options.

  Please see https://help.ubuntu.com/community/UEFI for Ubunto UEFI install help.

  If you have an installation ISO that you used to create the bootable installation USB, you might want to consider editing than the ISO via the virtual KVM, on the tab of the VM and begin your installer in this way.  This will require that a compatible version of Java to be active in your browser.

  If you do not have a longer boot disk 2 TB, you might want to consider to keep everything in legacy bios mode and avoid the complexity of UEFI which can sometimes appear.

  For drivers, these will actually be the C600 Intel or Intel AHCI drivers (depending on the mode you're looking for).

  See the Readme in ucs-cxxx-drivers.2.0.8b.iso\Linux\Storage\Intel\AHCI\Ubuntu\14.04\ AHCI driver said that the ahci driver is already provided with the operating system...

  I must stress that for Ubuntu, I see not all versions or versions of firmware that have been officially supported for the SR on board or AHCI controller.  Please visit http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  Although you are able to run in AHCI mode, it is not officially test/pick-up.

  In my view, the controller AHCI/PCH 6 port included with theM4 C240 is supported in Ubunto 14.04.

  Thank you

  Kirk

• Satellite A300 - cannot install Ubuntu - empty flashing command

  Hello

  I want to install Ubuntu 11.10 on my Satellite A300 (psag4e), but when I insert the installation CD, boot hangs after this part of Toshiba with a flashing empty command line.

  What should I do?

  The value of the default BIOS and try again.
  Are you using the original Linux installation disc?

• Cannot install Ubuntu 11.04 on Satellite L650-I5310

  I can't install ubuntu 11.04 in my system. I see, on start up the ubuntu display. Then it will not work. But I can't install ubuntu 8.04 with any problem.

  A year before I used ubuntu in dual boot mode.
  I don't remember the version. but at that time, some of my option of system like bluetooth, camera etc. were not working.

  So I removed ubuntu. now, I've heard 11.04 is more full of power. I would like to install 11.04 in mode dual boot.
  I downloaded 11.04 32-bit version and writes in a dvd using creater toshiba drive.

  Please help me.

  Hello

  Perhaps the problem is the created disc of Ubuntu.
  Try to install Ubuntu on the USB.

  Here's a nice HowTo that I found in the internet.
  http://blog.sudobits.com/2011/04/23/how-to-install-Ubuntu-11-04-from-USB-or-CD/

• Cannot install Ubuntu 14.04.2 on Acer Aspire E5 - 511G with Windows 8

  Hello. I have tried everything I can to install Ubuntu 14.04.2 alongside Windows 8 on my laptop and I'm not going to be successful. I have Ubuntu on a USB key, and whatever I have, I get the message "the system has no USB boot option." So far, I have:

  -Disabled the quick start.

  -Disabled Secure Boot UEFI firmware settings.

  -Tried to set the USB FDD and USB HDD at the top of the order of priority of Boot and Windows Boot Manager to the lowest priority.

  These measures appear to allow most people to access Ubuntu on their flash drive, but it does not work for me. Anyone know what I can try? Is there anyone here who has the same model and who has installed Ubuntu?

  If USB is not, probably you did not create a proper EFI bootable USB.

  Rufus allows you to create a bootable USB flash drive, selecting only for UEFI system.

  http://Rufus.AKEO.IE/?locale=en_US

  Please re-enable secure too boot.

• Cannot install itunes on HP MediaSmart Server EX485

  I am trying to install itunes on EX485 MediaSmart server but running in a "error message not enough permissions." I downloaded the installation on the desktop file and tries to install when you connect to the server using Remote Desktop Connection (RDC).

  I am connected with a user in the Administrators group, so I am confused how I do not have enough permissions.

  Does anyone have a suggestion?

  I found the solution. Internet Explorer has restricted installation of iTunes. The solution was:

  1. Open Control Panel
  2. Go to add or remove programs
  3. Go to add/remove window components
  4. Clear Internet Explorer Enhanced Security Configuration check box
  5. Click next to apply the change
  6. Restart the server
  7. Install iTunes

  Is recommended after installing go back and turning security on.

• Cannot install Fedora 11 as a guest on VMware WS 6.5.2 with Windows 7 as a host - using 64 - bit hardware

  Hi people,

  Did my research, but was not able to find answers, so here, I'll post my question/problem.

  I have a HP Compaq nx6125 laptop which has an AMD Turion 64 2200 MHz processor, running Windows 7 Ultimate. I installed the VMware Workstation 6.5.2 full trial and try to install Fedora 11 on a virtual machine.

  I understand that the Turion processor is a 64-bit processor, so I downloaded the iso image of Fedora 11 x86_64 DVD.

  First of all, I need to create a VMware virtual machine (Guest OS: Linux) and choose a version for it. If I choose a version that is one of the 64-bit options (for example, "other Linux 2.6.x kernel 64-bit", since there are specific options for RHEL but not for Fedora), I get an error message at the point where I try to boot from the virtual machine and begin the installation, saying "buslogic SCSI is not supported for 64-bit guests in this version...". ». Then the machine virtual everything stops.

  I guess that this laptop have a SCSI bus, but my disks are IDE and I can see (information system) SCSI bus is not used (?).

  On the other hand, if the virtual machine, I create is one of the versions of 32 - bit option, I get what seems to be just a warning, saying that I am under guest (Fedora 11) OS 64-bit on a virtual machine that is configured to run a 32-bit operating system, and suggesting that changing this to ensure that the client 64 - bit OS will work correctly. What would be the risks / disadvantages of force the installation anyway? Or maybe I should upload an image of Fedora 32-bit and run it on a virtual 32-bit machine, even if my hw is 64-bit? I don't find it too appealing...

  I wonder if someone on the forum has worked with this combination (VMware WS 6.5.2) and Fedora 11 running it, preferable on a HP Compaq 6125 under Windows 7 Ultimate? If so, I'd be really grateful comments / pointers.

  I am new to the world of the machine virtual, so bear with me here.

  Thanks in advance for any help you can provide!

  Kind regards

  Santiago

  "Buslogic SCSI is not supported for clients 64-bit in this version... »

  This message says that the 'virtual' storage controller you have chosen to use for your virtual machine for Fedora 11 (VM) is not supported for 64-bit guests.  It is not related to the host hardware.

  To change the controller for your virtual machine, make sure that the virtual machine is switched off voltage, and then open the settings for it and change the BusLogic to free storage controller.

• Unable to connect to the server of VMware Workstation

  I'm running ubuntu 13.04 (I know only is not officially supported at this time), however, when I navigate my browser to the virtual server (that I configured it using the port 10250), I get the following message is displayed:

  Access to the denied Web page

  Less

  You are not allowed access to the Web page at https://server:10250 /. You may need to connect.

  Error code: 403

  Status of it running:

  Andrew@server:~$ vmware - version

  VMware Workstation 9.0.2 build-1031769

  Andrew@server:~$ sudo service start vmware-workstation-server

  From Workstation Server: fact

  Andrew@server:~$ sudo netstat - apn | grep vmware

  TCP 0 0 0.0.0.0:10250 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 7878/vmware-pass

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 1703/vmware-authdla

  tcp6 0 0: 10250: * LISTEN 7878/vmware-pass

  UNIX 2 [ACC] STREAM LISTENING 37086 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  UNIX 2 [ACC] STREAM LISTENING 11814 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  UNIX 2 [ACC] STREAM LISTENING 42569 7878/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 [ACC] STREAM LISTENING 42580 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfc-fd

  UNIX 2 [ACC] STREAM LISTENING 42587 7878/vmware-pass/var/run/vmware/root_0/1371168951002706_7878/ha-nfcssl-fd

  [of] UNIX 2 CONNECTED FLOW 37087 6047/vmware-unite-h/tmp/vmware-root/unity-helper-ipc-: 1

  [of] UNIX 3 CONNECTED STREAM 35127 5534/vmware-tray

  [of] UNIX 3 CONNECTED STREAM 6047/vmware-unite-h 35819

  [of] UNIX 3 CONNECTED STREAM 43388 7878/vmware-pass

  [of] UNIX 3 CONNECTED STREAM 42564 1991/vmware-usbarbi/var/run/vmware/usbarbitrator-socket

  I get this message, if I run it on the local host, or if I run it on another machine.

  It's the only thing I see in syslog:

  Cat/var/log/syslog | grep vmware

  June 13 to 17:04:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:37:04 server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:54:56 Server/usr/lib/vmware/bin/vmware-hostd [8970]: password accepted for user andrew 127.0.0.1

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': no such file or directory.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: Acquired the lock to/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13 to 17:55:28 vmauthd Server [4593]: vthread-3 | I120: unlocked lock for/var/run/vmware/authd_14937f64dcf6846b509ee5705e0270eb

  June 13-20:13:42 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:48 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:13:55 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:02 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  June 13-20:14:06 server named [1418]: fix error (network unreachable) 'my.vmware.com.edgekey.net/A/IN': 2600:1401:2:42 #53

  13 June at 20:14:09 Server/usr/lib/vmware/bin/vmware-hostd [2275]: password accepted for the 127.0.0.1 root user

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd [2275]: last message repeated 2 times

  13 June at 20:14:29 / usr/lib/vmware/bin/vmware-hostd Server [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:02 / usr/lib/vmware/bin/vmware-hostd [7008]: last message repeated 3 times

  13 June at 20:15:04 the server kernel: [3056.496451] vmware-gksu [7037]: Segfault at 7f353f7591aa ip 00007f3547c38156 sp 00007fff95cf93d8 error 4 to libc - 2.17.so [7f3547bb0000 + 1be000]

  13 June at 20:15:05 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:07 the server kernel: [3059.388927] vmware-gksu [7085 or]: segfault at 7fc4c9f331aa ip 00007fc4d253b156 sp 00007fff04d21118 error 4 to libc - 2.17.so [7fc4d24b3000 + 1be000]

  13 June at 20:15:09 the server kernel: [3060.572580] vmware-gksu [7130]: Segfault at 7f68319561aa ip 00007f6835e04156 sp 00007fff7ce94c98 error 4 to libc - 2.17.so [7f6835d7c000 + 1be000]

  13 June at 20:15:09 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:14 Server/usr/lib/vmware/bin/vmware-hostd [7008]: password accepted for the 127.0.0.1 root user

  13 June at 20:15:17 the server kernel: [3069.298603] vmware-gksu [7548]: Segfault at 7f4d5bdeb507 ip 00007f4d64350156 sp 00007fff78106918 error 4 to libc - 2.17.so [7f4d642c8000 + 1be000]

  So I was wondering if anyone else has similar problems, I thought maybe it was the port that he was running on, and chrome doesn't, unfortunately, I can't find a way to change the port (as running with root, does not this either).

  I was confused Workstation Server with WSX.

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• Cannot install Ubuntu on HP DV4 1500 Pavilion Entertainment PC

  I have a laptop with Windows 7 preinstalled by HP.

  now, I want to use it as a Linux Machine.

  When I try to install or start any linux/UNIX cd/usb, the system does not detect the...

  but when I boot it from win7 or win8 system detects and installs...

  How to get around the BIOS Lock Windows 7 (Windows)

  and install Linux OS flavor...

  Guide me as soon as POSSIBLE...

  It wasn't a problem with the BIOS settings...
  The question is how HP handles the boot device for locked bios of laptop computers.

  You cannot boot any os other than OS locked.

  Deviation is boot Ubuntu via USB HDD and install...
  subsequently install updated BIOS (from Ubuntu using Insyde Orginal Patch) to definitively solve the problem...

• Cannot install: problems connecting to the server

  I have a problem when installing the new version of Skype, whenever I have install and starts to say there is a problem to connect to the server, download Skype alternative, and when I do it here it again when I install, can someone help me with this problem of server?

  What Setup you're trying to open?

  The only what you have to do is copy the Skype.exe and Login.cab files and paste these files the installation of Skype folder or even any new folder on your computer.

  If you extracted all the files from the SkypeSetup_6.18.0.106.msi file, then you should be able to find the Skype.exe and Login.cab files in:

  \SourceDir\Program Files\Skype\Phone\

  

  

• Cannot install Ubuntu

  Hello

  I just got my new Ideacentre A310 all-in-one desktop computer.

  I never intend to use the operating system pre-installed, so I started the system, read the license agreement of MS and rebooted with my Ubuntu 10.10 live-USB.

  Now, something strange has not arrived. The live-USB has been recognized and began to initiate, bus and then the screen just erased, and the keyboard went unresponsive. I tried again and I tested the live-USB on my old laptop - and I'm still stuck.

  Can someone explain why this happens? Then point to the solution of the problem?

  cordially Wullepoliticiens

  Problem solved.
  I created my live-USB with UNetbootin instead of detault Ubuntus Creater of startup disk. And my new PC is now running.
  For some reason any SDC done something wrong for this particular situation (it works fine for my old HP laptop and my Acer netbook).

• Cannot install the behavior extension for server and database for Dreamweaver CC 2014

  Hello

  I try to install the server behavior & extension of the database in my CC of Dreamweaver 2014 of the trial.  I've added it to https://creative.adobe.com/addons/patches/2176#.VGJ7TvnF-DA and it shows I have, but it has not yet appear in Dreamweaver.  I followed the steps outlined in the troubleshooting list:

  Internet works

  The application is compatible with the addon

  The application of CC desktop is installed and running

  Synchronization of files is enabled

  After that, I tried to install it through the Adobe Extension Manager.  As soon as I loaded up the Manager has crashed.  Whenever I open it crashes immediately.  Here is the error report:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe Extension Manager CC.exe

  Application version: 7.3.2.0

  Application timestamp: 5423f0ba

  Fault Module name: MSVCR100.dll

  Fault Module Version: 10.0.40219.325

  Timestamp of Module error: 4df2be1e

  Exception code: 40000015

  Exception offset: 0008d6fd

  OS version: 6.3.9600.2.0.0.256.4

  Locale ID: 1033

  Additional information 1: 9b2b

  More information 2: 9b2bdea32afaae877182c5486bcda189

  3 more information: f7dd

  Additional information 4: f7dd51dc76fb06d86332126480a431b7

  I then removed my addons, then deleted and reinstalled the extensions Manager.  As soon as I tried to open the Manager it still crashes.

  Any ideas?

  Running Windows 8.1

  Thank you

  -James

  Try the following.

  1. Uninstall the current extension.
  2. Install the DMXZone extensions Manager
  3. Using the extension Manager DMXZone, install the connections/data server behaviors panel

• Cannot install on 64 bit rhel Server wls

  Hello
  
  I am fairly new to this area (linux & wls).
  
  I recently got a linux server and tries to install wls
  
  my server configuration is RHEL 64 bit.
  
  Downloaded
  JDK: jdk-7u5-linux - x 64 .rpm
  WLS: wls1211_generic.jar
  
  proposed by bash mode to run as root:
  
  JDK installed by using the command

  rpm -ivf jdk-7u-linux-x64.rpm

  I am now trying to install wls with command below
  

  java -d64 -Xmx1024m -jar wls1211_generic.jar 

  giving the below error:
  X connection to localhost: broken 10.0 (stop explicit kill or server).
  
  Tried to search a lot to the internet, but couldn't find a solution for this.
  
  any response is appreciated...
  
  Thanks in advance,
  Srinivas P.

  Srinivas,

  I found a (metalink) Id support Oracle that might help you: 1077486.1

  Arik