Cannot install utilities on Satellite L670D-103 with Win7 32-bit Toshiba

Similar Questions

• Error in Toshiba VAP by installing on the Satellite A100-906 with Win7

  Hello

  I want to install PVAT on my laptop but the installation is performed with the error message: ID_ERR_NOTINSTALLTVALZ_MESSAGE
  PVAT is downloaded from the Toshiba support for my laptop model pages.
  My OS is RC Win7 64 with the latest updates.

  Any idea?

  Thank you
  Tomas

  I would like to know where you found this PPV for your laptop model.
  I t could not find.

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• Re: Need drivers WLAN for Satellite L550-199 with Win7 64 bit

  Hello

  After Installing Win 7 64 bit map of recovery dvd W - LAN does not work.

  I try to reinstall the drivers for it, but can not find drivers for it on the Toshiba download page.

  In another thread, I was able to find the download site for all the drivers for W - LAN ([http://aps2.toshiba-tro.de/wlan/?page=downloads | http://aps2.toshiba-tro.de/wlan/?page=downloads]), but I don't know what the WiFi card in the laptop.
  The page of the product for the L550-199 also did not mention what card it is.

  Someone knows more?

  Thanks in advance!

  Philipp

  Hello

  Realtek RTL8191SE WLAN card inside your laptop model a.

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Cannot install Service Pack 2 update on my Vista 32 bit computer. (error 0x800f0818)

  original title: cannot install Service Pack 2 update on my Vista 32 bit computer

  Through the windows update install Service Pack 2 and keep getting error 0x800f0818.  Have run fixit and the tool of analysis, but always in error.  Looked this error but can't find anything about it.  How can I fix it?

  I think that what PA bear is coming in the post previous is that service pack will contain Vietnamese Windows updates necessary for their release.

  A little/sorta...

  KB2555917, KB2507938, and al. (which dates from July 12, 2011 & before) would have been the last installed if updates Vista SP2 is not installed yet.

• I have a hp p6203w that the tv tuner card will work with win7 64 bit

  I have a hp p6203w that the tv tuner card will work with win7 64 bit

  According to the specifications of the product (here), your motherboard (M2N68 - LA) has x 1 PCIe expansion slots. I was able to find a wide range of TV tuner cards that will fit in your PC here.

• where can I download PCI device Acer laptop with win7 64 bit driver

  where can I download PCI device Acer laptop with win7 64 bit driver

  Information on what you need the driver can be useful, but--
  All the drivers for your card mother books must be downloaded from the Acer site.
  These should include drivers for the cards that use a PCI slot. If not then you would
  Download the drivers from the mfg of the connected to the PCI slot expansion card.
  .

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• How to install XP in Satellite A300-1BI with Vista

  Hello

  A few days ago, I bought a Satellite A300-1BI with Windows Vista preinstalled. I don't like this OS and I want to degrade for Windows XP and also install my Ubuntu Linux distribution, but I cannot install lame of them because the hard disk appears as "not connected" on men to install XP and Ubuntu... It seems that the laptop is made ONLY for Vista and I think that it's... pathetic...

  Can someone help me? I tried to search for information on the web, forums, etc., but it seems I'm the only one with this problem.

  Thank you!

  Estemon sorry but I cannot believe that you wrote here. It's more poised to last a year and you can find so many threads here with the same question. In a minute I found, for example, what a http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787

  It's Satellite Pro, but the principle remains the same.
  Check it please satellite a category on this forum and you will find answer to your question.

• Cannot install on my Satellite C855 1MZ BT

  Hi all

  PC: Toshiba Satellite 1MZ-c855
  Operating system: MS Windows 7 Edition home premium 64
  Cannot install Installation BT. stuck [here | http://imageshack.us/photo/my-images/805/37790030.png/].
  All tips are wellcome.

  You have activated BT module until you have started installing BT stack?

• Cannot install VAP on Satellite L40

  Hey people,

  I have a model of Satellite L40 - S13, which I formatted today. In this process, I installed Win 7 (32 bit).

  Now, the FN keys do not work. I read, so I have to install the Flash Cards Support utility and Vaule added package.

  The installation of the Flash Cards Support utility has no problem, but I can't geht the VAP to work. I tried the version of Win 7 and vista version. I always get the following error message: ID_ERR_NOTINSTALLTVALZ_MESSAGE.

  So I read, I have to update my bios. I downloaded the update to the Bios of toshiba home page, but even that does not work.

  Can you help me please, I'm kind of stuck here. Searched the Internet for hours and downloaded like 20 different packages...

  Thanks in advance,
  Kind regards
  n.

  It is sometimes problematic to install and get configuration working 100% on old machines with Win7.
  For example, I installed Win732bit on two Satellite A300 with no problems. I installed VAP only without flash cards support utility and everything works perfectly, so I think you don t he need for your L40, no more, just VAP.

  Have you tried already?
  Now is better to install OS again and start over.
  After that OS installed driver chipset display driver, driver sound utility password and then VAP.

  It is not so easy.

• Cannot install Windows Update KB947821 KB2770660 KB2761465 with error code 80073712 / 8007371c

  Original title: cannot install KB947821 KB2770660 KB2761465 version November 2012

  Hello

  Because it was offered as part of a 10 part windows update a few weeks ago I have not been able to get

  KB947821

  KB2770660

  KB2761465

  Versions of November 2012 to load on my machine

  tried all software "fix it" off site, separate download of the site Web and cleaning facility.

  Tried all the option that I can find for similar problems on the forum too.

  nothing seems not to work

  Vista SP2

  Any help would be welcome.

  TIA

  Mark

  Hi Mark,

  Thank you for your response.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the methods below according to your error code and check the issue:

  Method 1:

   

  Follow the steps in the link below.

  Windows Update error 80073712:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712

   

  Method 2:

   

  Follow the steps in the link below.

   

  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/931712

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

   

  Method 3:

   

  Follow the steps described in the links below.

   

  How to get the latest version of the Windows Update Agent:

  http://support.Microsoft.com/kb/949104

   

  Information for network administrators about how to obtain the latest Windows Update Agent:

  http://support.Microsoft.com/kb/946928

   

  Method 4:

   

  Follow the steps in the link below.

   

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 5:

  Follow the steps in the link below.

   

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/957310

   

  On-site upgrade warning:

   

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

   

  Let us know the State of the question, if you need help I'll be more than happy to help you.

   

• How can I disable tapping on Satellite A210-103 with a Synaptics touchpad

  Hello

  How can I disable tapping an A210-103 with a Synaptics touchpad.
  Tapping means to me, that when I touch the touchpad of the notebook translate under circumstances like a mouse click, on which I don't want.

  In the settings of the Germans, I found nothing of such "tapping."

  Jürgen

  Hello, Hans Juergen

  Of course, you can turn off the tapping.

  I assume that you want to disable this tapping and instead of tapping you want to use the two buttons on the touchpad. Am I wrong?

  This can be disabled
  Control Panel-> mouse-> last tab settings of the device (or similar).
  There you have to choose the Synaptics TouchPad settings

  The new window should open, and you could find a lot of different details and parameters.
  You must mark the second option tapping. It s from the point of view of all.
  Here you uncheck the option enable tapping

  That s all ;)