Cannot install Windows Update KB947821 KB2770660 KB2761465 with error code 80073712 / 8007371c

Similar Questions

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Window update KB2719177 installation failed with error code 80092004.

  When my computer tried to install the KB2719177 update of Windows, installation has failed several times with an error code 80092004. Please advice.

  Hello

  
  You can run the system update tool and then try to install the update. Read the following article.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821
  See also:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,
  http://Windows.Microsoft.com/en-us/windowsvista/back-up-the-registry
  Warning of CHKDSK
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows Update fails for KB980182 with error code 80071AA7 and a few references to sqmapi.dll

  ... Support as good phone & E-mail have told me that my installation of IE8 is corrupt and that I should reinstall Windows.

  IE is part & parcel of your operating system (e.g., Windows): If IE8 is "corrupt", Windows is corrupted, too. If this is the case and you are not ready to control depth for hijackware, only a clean installation can solve many problems.

  If you choose not to, then be... but understand that your personal data (for example, online banking user names & passwords) still at risk with the computer in its current state (that is, not fully-patched).

  In & out.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  I'm ready to do the checking hijackware.  Just have not been through a thorough check before.

  In addition, based on one of your last posts, I checked to see if I had SQL Server installed.  Yes, I did.  Both a mini-edition 2005 old (forget which exactly edition), as well as a complete edition in 2008.  This could have come as I soak in access programming.  The two versions of SQL server is uninstalled, I still hit the same problem with sqmapi.dll

• Can not install windows update to KB2656362 get the error code 880070490. Run fix, but it has not fixed the problem.

  Can not fix with fixit.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  If the system update readiness tool solves the problem, you will need repair Windows.

  Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.

• Cannot install security update MS Office 2010 KB2589337 Error code 0 x 80070663

  I tried to install KB2589337 but fails every time yet, update notification remains on the taskbar. Error code 0 x 80070663

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try the steps mentioned below.

  Method 1:

  You cannot install some programs or updates

   

  http://support.Microsoft.com/kb/822798

  Method 2:

   

  Try the steps to repair the .NET Framework in the following article.

  http://support.Microsoft.com/kb/976982

  Method 3:

   

  Download the update manually and try to install a version according to your operating system.

  Update of security for Microsoft Office 2010 (KB2589337) 32 - Bit Edition

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29745

  Update of security for Microsoft Office 2010 (KB2589337) 64 - Bit Edition

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29735

   

   

  If the specific problem for the update, then you can ask your question in the forum of Microsoft office.

   

  http://answers.Microsoft.com/en-us/Office/Forum

  Hope this information is helpful and let me know if you need additional assistance.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install windows update kb2686509

  Cannot install windows update kb2686509

  Hi marksherick,

  If you are unable to install KB2686509, follow the steps described in this document that is specific to not be able to install this update.

  You can also try the following troubleshooting options described in the links below:

  Reset the Windows Update components

  You cannot install some programs or updates

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• Cannot install Windows updates KB2660465 and KB2654428 error code 800B 0109

  OT: Install the update failed with Code 800B 0109 for the security update for Windows Vista (KB2660465) and the security update for Windows Vista (KB2654428)

  I have Norton 360 on my computer with Windows Vista Home Premium and Service Pack 2. Norton 360 stopped working last night. When the expert support of Norton try to reinstall norton 360, the process has failed due to the signing of the installation file could not be validated. Then they find that my compurter has some important security update could not install. When try to install these updated, get the 800B 0109 error Code: these important security update include:

  Windows Internet Explorer 9 for Windows Vista

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB2647516)

  Update of security for Microsoft Silverlight (KB2668562),

  Update security for Windows Vista (KB2660465),

  Update security for Windows Vista (KB2654428),

  Security Update for Microsoft .NET Framework 2.0 SP2 under Windows Vista SP2 and Windows Server 2008 SP2 x 86 (KB2633874).

  Update security for Windows Vista (KB2393802)

  Update security for Windows Vista (KB2633171)

  They suggest me come to the support of windows to ask for help. Please help me to solve these problems. Any suggestion will be hghly enjoy!

  Hi JianLi_987,

  Follow the troubleshooting steps in this thread to solve the 800 B 0109 Windows Update error.

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  popihavaki,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/>

  05/05 / 1101:03: 23 am