Cannot install VAP on Satellite L40
I have a model of Satellite L40 - S13, which I formatted today. In this process, I installed Win 7 (32 bit).
Now, the FN keys do not work. I read, so I have to install the Flash Cards Support utility and Vaule added package.
The installation of the Flash Cards Support utility has no problem, but I can't geht the VAP to work. I tried the version of Win 7 and vista version. I always get the following error message: ID_ERR_NOTINSTALLTVALZ_MESSAGE.
So I read, I have to update my bios. I downloaded the update to the Bios of toshiba home page, but even that does not work.
Can you help me please, I'm kind of stuck here. Searched the Internet for hours and downloaded like 20 different packages...
Thanks in advance,
It is sometimes problematic to install and get configuration working 100% on old machines with Win7.
For example, I installed Win732bit on two Satellite A300 with no problems. I installed VAP only without flash cards support utility and everything works perfectly, so I think you don t he need for your L40, no more, just VAP.
Have you tried already?
Now is better to install OS again and start over.
After that OS installed driver chipset display driver, driver sound utility password and then VAP.
It is not so easy.
Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."
I installed every driver and utility for 64-bit, but still the same...
Everyone has experienced with this?
Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
Please, someone help!
VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
After have installed all the patches Vista, try to install VAP and other tools.
PC: Toshiba Satellite 1MZ-c855
Operating system: MS Windows 7 Edition home premium 64
Cannot install Installation BT. stuck [here | http://imageshack.us/photo/my-images/805/37790030.png/].
All tips are wellcome.
You have activated BT module until you have started installing BT stack?
Hi "to the point im trying to install windows 7 on a Satellite L40-18 and when I boot from the cd, he said: I have no safely remove the storage device."
When I run Vista as usual and try to install from my computer it says that I don't have hard drives. am so confused please help :-)
I m also confused with problem described.
You are using the original installation disk Microsoft Win 7.
Do you own OS installation or upgrade only?
Please send us more information.
I recently bought a laptop: SATELLITE L40 - 18Z, MODEL No. PSL48E. One of their salesmen dim wit forgot to mention that the warranty expires once you remove the VISTA machine.
I make music and need for XP as no software has caught with VISTA yet.
Someone out there has done this on this machine? It works if you download all the drivers for the model of the toshibas download section? When you have to install the drivers and through what media bring you on the machine? Do yuou should reformat the hard drive at all prior to xp?
I'm not clued by all means on this side of things for any help/advice would be much appreciated!
Post edited by: ADMIN
> One of their salesmen dim wit forgot to mention that the warranty expires once you remove the VISTA machine.
That s is not true.
If you want, you can install the XP. That will not affect the warranty!
If you want to install the Xp you simply boot from the XP CD.
Then, you will need to include the SATA (Intel Storage Manager) driver using the F6 key during the installation procedure.
All or all the drivers needed XP, you should find on the page of the pilot!
See you soon
When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.
I was wondering if someone can help me correct what I want to start the whole process.
Thanks in advance.
You can run chkdsk after Windows has started.
Type in the CMD COMMAND.
The console should open and there you can use the command * chkdsk *.
I need XP on a Satellite L40 (PSL40L).
The crash of Setup with a STOP: 0x0000007E error message.
It's a French system and the message is:
try to update the BIOS or disable cache mem
There is only a BIOS update for Windows Vista on Toshiba download for this model pages.
What should I do?
Flash the bios (BIOS vista) or try an another XP BIOS (PSL48G for example)
Please help me!
You try to use the installation of Windows XP SP2 home edition?
I got a Satellite A100 (PSAA9E)
I downloaded Toshiba VAP for vista from the Toshiba homepage.
When I try to install it, I get this error:
Can someone help me get PPV on my Satellite to use the FN buttons?
The VAP can be installed only running Vista OS and also the BIOS should be updated too.
I read a few threads on a similar problem and after BIOS update the VAP was able to install.
I can't install the package value-added on my laptop. Installation process terminated with error ID_ERR_NOTINSTALLTVALZ_MESSAGE
I have my BIOS updated to 3.10 - win64, found on the official site and installed the o2micro flash media driver. The flash media driver is for 32-bit vista only, but it is installed without any error.
So, VAP cant't be installed in any case
What can I do else?
UPD: flash media driver - first of all, Ii have installed o2micro native 64-bit driver
now, I tried a 32-bit driver available on the toshiba site
I checked the Web from Toshiba site and it seems that, for your laptop model (PSAKCE), no driver Vista x 64 is available and you have the drivers for the other models A300D but normally it shouldn't be a problem. There is no significant material differences.
In any case, before installing the VAP mark sure you t have any yellow exclamation mark in Device Manager and SP1 for Vista should be installed!
Also, why did you install the 32-bit driver for the card reader? Have you had problems with the 64-bit driver?
Please can someone help me. I just brought 52 portable Satellite Pro A200. They come with pre-installed Vista, but I want to wipe and install Windows XP. However, I have a big problem - when I put my XP CD in and start it, then click on enter to continue, he tells me that the Installation cannot continue until Windows cannot find any hard drives (although I can boot under Vista so I know that the HARD drive are ok).
Thanks for looking,
Cromwell Community College, UK
You must install the Intel Matrix Storage Manager.
This driver can be found don page Intel:
Please also check this thread. It s very useful:
My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
I made a USB bootable with Win8 and starts very well.
The problem is that it does not detect my SSD, so I can proceed with the installation.
SSD appears in BIOS but not in Windows Installer.
He said that there is a missing driver.
I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.
I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...
What can I do?
Thanks for the help.
More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
As you say, the compatibility mode is not working too, so I think there is another problem.
However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.
But I m wondering if you would be able to install this Win 8 on common SATA HDD.
Have you tried to format the SSD using a different computer, then install Win 8?
Give it a try.
I have an old Satellite P10
(1) reinstalled Win XP sp3 (NOT of CD from Toshiba)
2) obtained the most recent modem drivers from this Web site - can not install; It's Setup log
2009-03-02 20:11:28 - Debug, Setup Version 1. 58A
2009-03-02 20:11:28 - Debug, LogFlag = TRUE
2009-03-02 20:11:29 - Debug, SourcePath is OldPath or not fixed drive
2009-03-02 20:11:29 - Debug, installation MDC_TOS
2009-03-02 20:11:29 - Debug, LogFlag = TRUE
2009-03-02 20:11:30 - debug in InstallModemByRefresh()
2009-03-02 20:11:30 - debug, CopyNT5Inf
2009-03-02 20:13:32 - Debug, timer has expired!
2009-03-02 20:13:32 - Debug, Setup failed
(3) try Toshiba cd - same result modem drivers
And Yes, I know - it's the same problem as described here several times: yellow question mark in device (PCI modem) Manager and the order of incorrect installation.
But I installed much gentle and do not want to reinstall again
How to install this driver AFTER other pilots?
Driver Toshiba download page you will find an installation instructions document. Use this list as the software installation order and the recommended driver.
That s important that you get all the functions work.
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Hi, I have Satellite 1710 CDS.
This laptop has RJ45 wording "Ethernet" connector on the rear side.
In my book there is not written anything on the inbuild ethernet card. Photos of manual shows back of laptop, it has drawn no ethernet connector, but my laptop has had! Is this possible?
Why toshiba is not talking about ethernet in the manual for CD of Satellite 1710 and my 1710 has? I don't understand.
Windows ME cannot recognize this net adapter. I don't know what drivers should I look for. Please help me or give me advice. Thank you.
Sorry, I have you dissappoint! Satellite 1710CDS has NOT built in LAN!
The cover has only a black RJ45 model at the backsite without function!
I need help.
I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
We know what the problem might be?
Did someone encountered the same situation?
It's really frustrating...
Please check the different view on the same driver problem.
Try to download the driver again and see your results. Thanks ;)
Hi I read through all the posts and I can't seem to find an answer.
My problem is that...
I tried to install windows from a full version and when I want to install windows on a partition it fails. If I try to delete the partition, it fails. If I use the recovery discs - Option 1 not entered completely load - looks like Gdisk? error and then a ghost. Option 2 loads but when I go again to install fails.
I can't find an option in the bios to prevent disk access - as a protection against boot viruses. the key under the keyboard, I tried in both positions.
I removed the battery to see if it is a power problem.
I tried using the options of recovery in win xp - but cannot access the drive
The really strange thing is over the option of recovery disks 2 - the size of the disk is larger than the actual size of about 1/3?
The system initially went down while it is connected to the internet - the only option I can thing of is a power surge came down the line and has damaged the motherboard or hard drive. As it happened to a desktop system - blew 3 modems and a UPS before we have located the problem.
tried to check and format the drive with an external tool? I'll give you a suggestion: try the "ultimate boot cd" which has many tools also some tools for the maintenance of hard drives.
You can get the picture here: http://www.ultimatebootcd.com/
Just burn it to a CD, boot and choose the tool for your hard drive to check it out and repartition it.
It could be that useful...
Maybe you are looking for
So I tried to move the documents because of the name, my desktop in a different folder in AppleScript change but all my tests were able to do nothing. If anyone can help that would be great.
I remember my Skype ID but I don't remember my password? How can I set a new password?
Hello again,My drivers are all working on my 17 desire except the wireless network controller. (I was using cable up to this point)Network wireless controller------------------------------ PCI-VEN 8086 & DEV_0887 & SUBSYS_40628086 & REV_C4PCI-VEN 808
Original title: Intel Turbo Memory Driver I'm using toshiba satellite a200-1. I buy my friend. He setupc portable windows7. the computer does not open a day later. and I install xp on my PC. laptop has an Intel Turbo Memory. But the driver does not
My update watch folder I installed SP1, but I continue to receive update messages telling me to install SP1. When I try, I get a message that the installation has failed. When I try to install SP2 I get the message that I need to install SP1 first. Y