Cannot install VMWare View connection Server 5

Similar Questions

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• Install the server Vmware View connection

  Hello

  I have problem install vmware view connection server, my server has already joined ActiveDirectory, but I can't install vmware view connection to the server

  

  Help, please.

  Thank you

  Hudan

  It simply means that the client does not like your server certificate.  You should be able to click on configure SSL and change the certification autour options to make it work.

• Problem in installing VMware View Server connection

  Hello

  As the first step to install the VMware View Manager, I tried to install the connection to the VMware View server on a virtual machine to Windows 2003 Server SP2. This machine is added to a domain under our Windows Active Directory. I can connect to the machine using user accounts that are on the directory to active directory. My problem is that when I try to install the view connection server, I get an error message indicating

  "The computer is a member of a domain, but no server connection was found. Please make sure that the computer is properly connected to a domain and that a domain controller is available before to perform this installation again'.

  Because I can log into the machine using accounts in active directory, I assume that the computer is properly connected in the field. I also confirmed that there is a domain controller in active directory. I tried to do the installation under an account that has administrative privileges for the object active directory, but also a local administrator account. Could someone suggest where I could go wrong?

  Thanks in advance

  Concerning

  Varun

  You have validated that DNS and WINS are configured correctly on the server you are trying to intall the broker for connections on?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Unable to connect to the host via VMWare View Security Server 4

  I have installed and configured the VMWare View connection server and can connect to the virtual machine (Windows XP Pro) shareed via the customer to view without a problem. The problem Im having is that I have configured the Security server in my zone demilitarized and authorized the appropriate DMZ ports and the port 80 and 443 to the outside on my DMZ. Access the public URL and he invites me to authenticate what I do and it then publishes my office pool. I click to connect to the shared pool and it says connection for about 5 drops of s and then just my connection. Now, if I go to my security on my DMZ server, I can connect to the thin desktop via RDP.

  Thank you

  eeg3 is correct if you have a direct connection enabled on the broker for connections paired with security server then you would be forced to open 3389 to the outside world since the workstations would try to connect directly to the desktop.    The right way to go forward is to create the replica with disabled direct connection and combine security with this box server.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• I can't install vmware view without a second server?

  I am really new to server management. When I tried to install VMware View Server connection I got an error. He said

  A controller of Active Directory (AD DC) domain to the "local" area could contacted could.

  Ensure that the domain name is typed correctly. If the name is correct, click details to correct that information.

  I also read somewhere that you can not install vmware view on the same Active Directory domain controller running server. Is it possible to install vmware view without going through a second server? If so, how?

  You may first have to install ESX/ESXi in your server.

  • After successful installation, connect to the respective client server using vShphere.
  • Try to create 3 virtual machines and install Microsoft 2 k 8 operating systems.
  • The first virtual machine, you can use it as Server Active directory micorsoft.
  • Then you can you use it to vCenter server.
  • Third one you can use for connection server vmware view.
  • You may need to create two more additional, as virtual machines VMware view comments and the other as a client of the view. You can either install windows XP/windows 7 for the VMS in the thesis.

  As already mentioned in messages, you can view VMware View Installation Guide for more details.

• Cannot install VMware Tools.

  Hello

  my client have esx1 and esx2 - vSphere vCenter device 6.0 and 6.0 knots. When I try to install VMware tools on Windows Server vm = error:

  VIX 21001 = error code

  Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 2 (no such file or directory). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine

  When I connect to esx1 via Putty and check ' usr/lib/vmware /-the 'isoimages' folder missing.»

  Please, what is faster solution?

  CZ THX

  Hello

  problem solved...

  I don't know why, but on esx1 - Local Direct USB access - declined, I restarted esx1 and now works perfectly

  so, I lost my network settings

  THX

  Tom

• View connection Server 5.0 running?

  I would like to know exactly how server connection works in VMware View environment.

  My understanding of the connection to the server

  (1) authenticates the user

  (2) the connection between the client and the virtual desktop negotiating

  (3) transfers Office

  Once the user is logged on the desktop, all traffic passes between the office and customer view, and in the meantime if connection server goes down, the user can continue working without interruption? And if the Security server is installed all the flow of traffic through the Security Server? And also so that the connection to the server is out of service new users won't be able to connect to their desktop computer.

  I would also like to know the functioning of the server of replicas of my understanding, that it is an exact copy of the connection to the server? In the scenario where our main login server breaks down the replica server will take over its own or users will need to type the replica server address to connect to their desktop and how can balance us the load between the connection to the server and server replicas. Any help will be much appreciated.

  The best answer on the functioning of the connection to the server just PG 97 view installation doc http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf

  The customer connection view initial, which is used for authentication of users and the desktop view selection, is created

  over HTTPS when a user provides a domain name to View Client. If the firewall and load balancing software are

  configured properly in your network environment, this request is received by the server connection or safety view

  the server host. In this respect, users are authenticated and your desktop is selected, but users have not yet

  connected to desktop view.

  When users connect to view desktop computers, by default, View customer makes a second connection to the view

  Connection to the server or host security server. This is called the tunnel connection because it provides

  a tunnel secured for the transport of the RDP and other data via HTTPS.

  When users connect to computers view from office with the PCoIP display protocol, View Client can make another

  connection to PCoIP Secure Gateway on the host server login to view or to the Security server. The PCoIP

  Secure gateway ensures that only authenticated users can connect with desktop view with PCoIP.

  When the secure tunnel or PCoIP Secure Gateway is disabled, the desktop view sessions are established directly

  between the client system and the virtual desktop computer from view, bypassing the view connection server or

  host server security. This type of connection is called a direct connection.

  Desktop sessions that use direct connections remain connected even if view connection to the server is no longer

  running.

  How to use a server replication and a connection to the server is to place them behind a load balancer.  One of the servers stops the balancer work load is modified to send all traffic to the job server.  If you use also servers security for connections outside the DMZ, security servers have a connection for a connection to the server and the load balancer will in front of security servers.

  Hope that helps

  Chad

• Faced with Windows 2008 R2 PKI, self-signed certificates & view iPad customer Secure Authentication to view connection server: UGH!

  Background: I was instructed to create a VMware View isolated laboratory test so that HIGHER-UPS can see how they could access the VM dedicated as well as how their developers could put related clones on-the-fly. The project was successful! Yay!

  Addendum: A boss wants to see how VMware View works when accessing his computer virtual dedicated via his iPad on the internet... And who needs a secure SSL connection.

  The problem is: the domain name I chose casually because the lab did not belong to me... So I can't have a real certificate from a trusted commercial certification authority.

  So I'll try to roll my own public Windows 2008 R2 PKI and... All that forcing the iPad to use DC/DNS server in the lab... Get only the single get iPad trust view connection server by importing a sort of certificate.

  Can I export/import a certificate of the CA of DC to the iPad via an attachment... And it happens with confidence. But how to create a login to view the server certificate and electronic-mail/import in the iPad so it happens with confidence? Whenever I try to export the certificate of the certificate of the view connection server store, send it to the iPad and install... The connection server certificate appears as 'not reliable' and the VMware View client will not connect.

  (Of course, I could get sloppy and set the iPad Client to accept untrusted connections... "But I want to solve the problem of approved connection).

  I could be missing something royally on the self-signed certificates and certificate chains.

  (It is a first for me dealing with Active Directory Windows Certificate Services. In the past, I always just installed expensive commercial SSL CA certificates in the certificates Windows Server stores before.)

  Any help or direction, you can provide would be appreciated. I'm rather confused.

  See you soon!

  Keegan

  Hello

  Maybe was your initial problem that the provided certificate must be a descendant of a trusted root, such as Verisign cert or

  the root certificate must be installed and all the intermediate certificates in the trust chain down to the one you use?

  Concerning

  AndyR

• Download link on the standard view connection server landing page no longer works (see 5.1)

  Hello

  We noticed a problem in the last week or so when clients attempt to download the client to view the launch of our view connection server page.

  The link is https://www.vmware.com/info?id=1109#win

  Who then is forwarded when it lands on the vmware site at

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_view_clients/1_0#win

  Unfortunately it is no longer available then you get pushed back to the root of the VMware download page.

  After doing a little digging, I discovered that the link to the download of the client page is now

  https://my.VMware.com/Web/VMware/info/slug/desktop_end_user_computing/vmware_horizon_clients/1_0#win

  So, it seems that VMware withdrew the designation of the download page view.

  No doubt other people have this problem too?

  Now, I know that I can change the link on the launch of the connect to Server page, but I'd rather have this fixed on the side of VMware so that I don't have to worry about updating the link when VMware change their website.

  Sincere greetings

  Matt Thurston

  To solve this, had to follow the part of this guide

  http://ituda.com/how-to-customize-the-view-portal-for-client-download-with-VMware-view-5-1/

  Only the part that details how to change the link on the download page.

• View Connection Server Manager - column 'User' not showing not connected in the accounts to the inventory of a Fund of the pool

  Hello

  I am trying to identify the point of failure in communication between a pool of related clones and the view connection server - which prevents the management console to see if-and-who is connected to a particular linked clone VM.

  He showed the status of 'User' correctly in the past, but after several re-compositions and to implement a McAfee Firewall required on the connection server, composer and each Linked-Clone - it stopped. Windows Firewall is disabled machines.

  I spent some time already tuning firewall McAfee to enable all required traffic and services and everything works - it seems fair that he is unable to take inventory on the linked clones with regard to if someone is logged in one.

  I suppose that the Agent view handles make this info on the login server, but I can't seem to identify the communication which is apparently filtered, when everything else seems to work in the infrastructure of the view.

  I'm testing with the firewall turned off to see if I can get it working again.

  I have attached a perforated Cap where is the problem.

  Thanks in advance,

  Corey

  It may be a stretch but check the Userinit registry key located at HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogin.   You want to ensure that C:\Program VMware View\Agent\bin\wssm.exe is specified in this key as will facilitate the session/user information to the broker for the connections once connected.

• Samsung NC-240 - Windows 7 with VMware View connection problem

  Hi all

  My Samsung NC-240 is set to connect to my server VMware View Connection Manager. I can connect to one of my Windows XP via PCoIP or RDP virtual desktop very well, but I can't connect to my virtual Windows 7 desktop. Whenever I try to connect, it will be wrong and tell them "Session Lost!"

  Research in the NC-240 event log, I see the following:

  11 d, 00:01:09.260 > ready to connect to the host

  11 d, 00:01:21.990 > connection to the host (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.020 > using resolution 1920 x 1080 at 60 Hz on DVI port 0

  11 d, 00:01:22.150 > CONNECTED (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.160 > receiving power state updated: S0

  11 d, 00:01:22.960 > CURRENT SESSION

  11 d, 00:01:23.600 > (MGMT_RDP): invalid capability length (20)

  11 d, 00:01:23.600 > connection down (RDP protocol error detected)

  11 d, 00:01:23.680 > lost Session!

  11 d, 00:01:23.680 > (MGMT_RDP): INIT: received unknown event 0 x 20!

  Here is the information of the current version of my NC-240:

  Part number of the firmware: FW010034

  Hardware version:

  Firmware Version: 3.0

  Firmware Build ID: v250

  Firmware version Date: December 7, 2009 15:55:15

  PCoIP processor revision: 1.0

  Bootloader Version: 2.1

  Bootloader version identifier: v163

  Bootloader Build Date: August 28, 2008 16:56:13

  Here is the information of the current version of my Agent and VMware View VCM:

  VMware View 4.0.0 - 210939

  I appreciate any input.

  Thank you

  Sang A

  I think it's the same than P20 then try wyse page

• The view connection server connection failure - and that's it.

  Hi all

  I use a box of 10 Windows with Horizon View Client 5.4.1. Our connections are enabled smart cards. When I run the view of the Horizon, I get the login server and hit connect. I am asked to choose a certificate; I choose the right pair, enter my PIN and then get an error message saying "connection to the view connection server failed." And that's the entire message. When I choose the right certificate, get "the connection to the view connection server is not. " No user could not be found for your certificate." That tells me that it's to reach the server, but without more info, I can not find the problem.

  I opened a session with a view to the Horizon with other machines and can I use my chip card with other sites on this computer. There are ports should I open to view Horizon? What else can I try?

  I started poking around outside the view of the Horizon and found the problem, I'll leave it here in case anyone else has this problem. I had to go to Internet Options-> content in-> certificates-> Select Certificate-> advanced and enable authentication of the Client.

• View connection Server Log Questions

  Hello

  I noticed a few things in my view connection server opens a session in one of my environments, and I was hoping someone might be able to specify what I see for me. I tried both of them without a bit of luck so far. So far, there don't seem to be problems caused by one of them that I know, and I see them in my two security servers and connection servers. All guests of my cluster run ESXI 5.0.0 build-474610 and all brokers are View 5.0.0 build-481677.

  This first stroke refers to three distinct data warehouses with the same caveat, and they are all three data warehouses that have been deleted or renamed due to restructuring. They are most referenced by the machines of the view or swimming pools, and all virtual machines have been migrated or removed and pools redirected before the time of the abduction. This warning occurs on every 6 minutes and reads as follows:

  WARN < VirtualCenterDriver-"GUID" > [VirtualCenterDriver] Datastore 'Data store name' not found in ComputeResource / "Name of data center" "/ host /" name of the Cluster

  Forgive me if I should do another discussion for this next (if necessary I will change this and create a new one instead), but the other thing I noticed is that the log shows several times the following entries as well about 25 minutes apart. And although they are INFO the part that worries me, it's that "deleted 24 references entry deleted." it has been the same number of months whenever it came (maybe it's a current account? That would explain it). No details as to what they call actually to would be great (obviously it seems to do with LDAP entries but it's that I get). I'd like to really just to understand what it is exactly, because I don't think that there is a real problem on this one. The entries include the following:

  INFO references < 3188 > input [ws_ldap] 0 collision resolved.
  References to INFORMATION < 3188 input > 24 deleted [ws_ldap] removed.
  INFO [ws_ldap] 0 < 3188 > collision the deleted entries.

  I would like to know if you need more information, or if I should divide these two in separate discussions. Thank you!

  On the first entry on the data may store the adam database still referred to this data store.    If this is the case, I'm sure it can be cleaned in a certain way, but you want to save the adam database before intervening.

• Cannot install VMWare tools on first installation of VMW Player for Windows

  Y at - it a tip to install VMWare Tools on VMW Player for Windows.  Tried as a Player 7.1.1 and 6.0.5.

  I downloaded the "darwin" and "windows versions" of tools with version management for versions of reader (for Player 6.05 6.05 tools).  But I don't know how to get VMWare to see downloaded files.  I connected the darwin.iso in the folder of the payload for the CD/DVD drive under settings of the virtual computer.

  I always get a dialog box with this message when I select install VMWare Tools in the menu:

  "Cannot find component on the update server. Contact VMware Support or your system administrator. »

  If you have the appropriate iso image attached to the guest, you have no need to use the "Install VMware Tools" menu - it's all that.  Go to comments and run the installation from the CD-ROM drive.